• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.33-49
• /
• 2016

The study area, located in Sinam-ri, Ulsan, in the southeastern part of the Korean Peninsula, is mainly composed of hornblende granite (ca. 65 Ma). Fracturing and reactivation of a fault striking ENE-WSW was strongly controlled by the intrusion of a mafic dyke (ca. 44 Ma), which behaves as a discontinuity in the mechanically homogeneous pluton, increasing the instability of the basement in this area. A geometric and kinematic study undertaken to interpret the faults and fractures was performed in a trench excavated almost perpendicular to the orientation of the dyke. The analysis of structural elements, such as dykes, veins, and faults, is used to infer the deformation history and to determine the paleostress orientations at the time of formation of the structures. The deformation history established based on this analysis is as follows: (1) NNE-SSW, E-W, ENE-WSW, and NE-SW trending fractures had already developed in the pluton before dyke intrusion; (2) felsic dykes intruded under conditions of σ_Hmax oriented N-S and σ_Hmin oriented E-W; (3) mafic dykes intruded under conditions of σ_Hmax oriented E-W and σ_Hmin oriented N-S; (4) dextral reactivation of the main fault associated with the development of hydrothermal quartz veins under conditions of σ_Hmax oriented E-W and σ_Hmin oriented N-S; (5) sinistral reactivation of the main fault and high-angle normal faults under conditions of σ_Hmax oriented NE-SW and σ_Hmin oriented NW-SE; and (6) dextral reactivation of the main fault and NE-SW low-angle reverse faults under conditions of σ_Hmax oriented NW-SE and σ_Hmin oriented NE-SW. These results are consistent with the tectonic history of the Pohang-Ulsan block in the southeastern part of the Korean Peninsula, and indicates the tectonic deformation of the southern area of the Ulsan fault bounded by Yangsan fault was analogous to that of the Pohang-Ulsan area from the Cenozoic. This work greatly aids the selection of sites for critical facilities to prevent potential earthquake hazards in this area.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.1
• /
• pp.51-60
• /
• 2021

Purpose: Radiocarpal dislocation (RCD), which is caused by high-energy trauma, often involves radial styloid fractures and short radiolunate ligament (SRLL) injuries. Although SRLL injuries may occur as a simple rupture at the attachment site of radius, it may occur with a relatively large avulsed-fragment in the volar rim of the lunate facet of the radius. This study aimed to differentiate the injury type of SRLL and assess the differences in the treatment results depending on the treatment methods that have been applied in RCD with radial styloid fractures. Materials and Methods: Eighteen patients managed surgically with RCD were enrolled in this study. The patients were classified as Group 1 and Group 2 by using the Dumontier method. In this study, Group 2 was subdivided into 2A (purely ligamentous or small avulsion fracture of the volar rim of lunate facet) and 2B (large avulsed-fragment enough to internal fixation) according to the injury type of SRLL. Groups 2A and 2B were treated with direct repair and screw fixation, respectively. Pain, range of motion of the wrist joint, grip strength, and complications on final radiographs were examined. The outcomes were evaluated using patient-rated wrist evaluation (PRWE), and modified Mayo wrist score (MMWS). Results: All patients were Group 2 (six and twelve patients in 2A and 2B, respectively). The mean flexion to extension arch recovered 79%,and the mean grip strength was 72.9% of the uninjured side. Group 2A showed better recovery in extension, flexion and pronation than Group 2B, but there was no difference in radial deviation, ulnar deviation, supination, grip strength and pain. No differences in the PRWE and MMWS were observed between two groups. Complications included traumatic arthritis in seven patients and residual instability in five patients. Conclusion: When the SRLL was injured, the involvement of a large avulsion fracture on the anterior plane of the radiolunate did not affect the test results. On the other hand, it should be observed cautiously because avulsion fractures tend to disturb the joint's reduction through rotation or displacement. In addition, anatomical reduction and sturdy internal fixation are important for restoring the function of the SRLL.

• 한국사회정책
• /
• v.25 no.2
• /
• pp.429-446
• /
• 2018

The $4^{th}$ Industrial Revolution, symbolizing the explosive innovation of digital technologies, is expected to have a great impact on labor relations and produce a lot of contested issues. The labor-management issues, created by the $4^{th}$ Industrial Revolution, are as follows: (1) employment restructuring, job re-allocation, and skill-reformation, driven by the technological displacement, resetting of worker-machine relationship, and negotiation on labor intensity and autonomy, (2) the legislation of institutional protection for the digital dependent self-employed, derived from the proliferation of platform-mediated labor, and the statutory recognition of their 'workerness', (3) unemployment safety net, income guarantee, and skill formation assistance for precarious workeforce, (4) the protection of worker privacy from workplace surveillance, (5) protecting labor rights of the digital dependent self-employed and prcarious workers and guaranteeing their unionization and collective bargaining. In comparing how labor unions in Western countries have responded to the $4^{th}$ Industrial Revolution, German unions have showed a strategic approach of policy formation toward digital technological innovations by effectively building and utilizing diverse channel of social dialogue and collective bargaining, while those in the US and UK have adopted the traditional approach of organizing and protesting in attempting to protect the interest of platform-mediated workers (i.e. Uber drivers). In light of the best practice demonstrated by German unions, it is necessary to build the process of productive policy consultation among three parties- the government, employers, and labor unions - at multi levels (i.e. workplace, sectoral and national levels), in order to prevent the destructive damage as well as labor-management confrotation, caused by digital technological innovations. In such policy consultation procesess, moreover, the inclusive and integrated approach is required to tackle with diverse problems, derived from the $4^{th}$ Industrial Revolution, in a holistic manner.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.137-145
• /
• 2008

An experimental study was performed in order to investigate the influence of Reynolds number on the drag coefficient variations of an oscillating airfoil. A NACA 0012 airfoil was sinusoidally pitched at the quarter chord point with an oscillating amplitude of ${\pm}6^{\circ}$. The free-stream velocities were 1.98, 2.83 and 4.03 m/s and the corresponding chord Reynolds numbers were $2.3{\times}10^4$, $3.3{\times}10^4$ and $4.8{\times}10^4$, respectively. The drag coefficient was calculated from the ensemble average velocity measured by an X-type hot-wire probe(X-type, 55R51) in the near-wakes region. In the case of Re=$2.3{\times}10^4$, variation of drag coefficient shows a negative damping (counter-clockwise variation), which implies an unstable state which could be excited by aerodynamic force, whereas the drag coefficient represents the positive damping (clockwise variation) as the Reynolds number increases from Re=$3.3{\times}10^4$ to $4.8{\times}10^4$. Hence, the drag coefficient variations show significant differences between Re=$2.3{\times}10^4$ and $4.8{\times}10^4$이다.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.3
• /
• pp.23-36
• /
• 2019

Background: The purpose of this study was to investigate the effect of Plank exercise on unstable support surfaces on flexibility, abdominal muscle thickness and pain in patients with chronic back pain. Design: Randomized controlled trial. Methods: This study was performed on 16 patients with chronic back pain of ◯◯ military unit. Sixteen subjects were randomly assigned into two groups, an upper extremity trainer group (group I, n=8) and a lower extremity trainer group (group II, n=8). The subjects in group I carried out Flank exercise applying the stability trainer to their upper extremities and ones in group II carried out the same exercise applying the stability trainer to their lower extremities for 4 weeks. In order to ascertain the difference between two groups, flexibility, abdominal muscle thickness and pain were measured before and after the exercise. The flexibility was measured by sit and reach test, the thickness of the abdominal muscle was measured by using ultrasonic imaging equipment, and the pain was measured by the visual analogue scale. A paired t-test was utilized to compare changes in pain, abdominal muscle thickness and flexibility before and after flank exercise on unstable support surfaces. Analysis of Covariance (ANCOVA) was performed for ascertaining the significant differences between groups. The significance level was set by α=.05. Results: 1) The flexibilities of two groups were increased after the exercise (p<0.05). 2) In both groups, the thicknesses of rectus abdominis, external oblique abdominis, internal oblique abdominis, and transverse abdominis were all increased after the exercise (p<0.05). 3) The pains in both groups were decreased after the exercise (p<0.05). 4) In the comparisons of two groups, there were no differences in the flexibility, thickness of external oblique abdominis, internal oblique abdominis and transverse abdominis and pain (p>0.05). Whereas only thickness of Rectus abdominis was larger in the group I than in the group II (p<0.05). Conclusion: Plank exercise on the unstable support surface for 4 weeks resulted in increased flexibility, abdominal muscle thickness and pain reduction in patients with chronic back pain. Therefore, it is considered that performing flank exercise on the unstable supporting surface is suitable for the reduction of the pain in patients with chronic back pain. However, in this study, it is considered that continuous and diverse studies are needed because there was not a large difference between the groups when the upper or lower limbs are provided unstable support surfaces.

• Korean journal of communication and information
• /
• v.81
• /
• pp.75-121
• /
• 2017

Maeul Community Media is community media practice that media education combine with community activism based on the region. Maeul Community Media appeared with Seoul city's supporting policy in 2012 and is now enlarging on a national scale beyond Seoul. This study is aimed at understanding and investigating Maeul Community Media activists' practice process by using a grouned theory approach. In-depth interviews were carried out of study participants who worked on as activists based on visual and radio field since 2012. By open coding based on grounded theory, 16 categories and 59 subcategories were discovered. The outcome of axial coding showed the centeral phenomena that can be called 'sustainable desire for Maeul Community Media act'. On the condition of the instability of public support and the absence of a village channel, the strategic practices were discovered, which are diversification of participants recruitment and modes of participation, invention of space-media, seeking multilateral distribution methodologies and the collective action plans of networks to stabilize the management and to empower Maeul Community Media networks. As a result, Maeul Community Media and civil society were networked by discovering and agenda-setting pending issues. And we could find that the desire and expectation for the role as a village's public sphere were enlarging.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.645-661
• /
• 2013

The synoptic, thermodynamic, and dynamic characteristics of a heavy snowfall event that occurred in Seoul metropolitan area on 27 to 28 December 2010 was investigated. During this period there was a distinctive case that was identified as a polar low. We analyzed surface and upper level weather charts, snowfall amount, sea surface temperature, satellite imagery, sounding, and the National Center for Environmental Prediction global $1^{\circ}{\times}1^{\circ}$ reanalysis data. The polar low developed in an area where there was strong baroclinicity in the lower level aided by strong conditional instability due to 925 hPa warm air advection and 700 hPa cold air advection. The development mechanism of polar low is due, in part, to the tropopause folding, which advected stratospheric air increasing potential vorticity in mid-level and inducing cyclonic vorticity and convergence in low-level. Eventually clouds developed and there were snowfall total of 10 cm in Seoul metropolitan area and as much as 20 cm in southern parts of Korea. During the snowfall development, there was a $-45^{\circ}C$ cold core at 500 hPa and shortwave maintained $3-5^{\circ}$ separation with surface trough, which favored the development of polar low located in the warm sector and cyclonic advection area. The height of the dynamical tropopause lowered to 700 hPa during the peak development and increase in potential vorticity allowed strong vertical motion to occur. Overall, there was a close relationship between the development of snowfall and tropopause undulation. The heaviest snowfall occurred east of the tropopause folding where strong cyclonic vorticity, vertical motion, and moisture advection all coincided while the polar low was passing through the Korean peninsula.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.608-613
• /
• 2019

NOx (Nitrogen oxide) in the exhaust gas from vehicle engines is considered one of the most harmful substances in air pollution problems. NOx is made when combustion occurs under high temperature conditions and EGR (exhaust gas recirculation) is normally used to lower the combustion temperature. As the EGR ratio increases, the NOx level becomes low, but a high EGR ratio makes the combustion unstable and causes further air pollution problems, such as CO and unburned hydrocarbon level increase. This study showed that fuel droplets could move more freely by the radiation of sonic wave for the stable combustion. In addition, the engine performance improved with increasing EGR ratio. As a basic study, the effect of sonic wave radiation on the velocity of fuel droplets was studied using CFD software. The results showed that the velocity of small droplets increased more under high frequency sonic wave conditions and the velocity of the large droplets increased at low frequency sonic wave conditions. In addition, an engine analysis model was used to study the effects of the increased combustion stability. These results showed that a 15% increase in EGR ratio in combustion resulted in a 45% decrease in NOx and a 10% increase in thermal efficiency.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.69-77
• /
• 2002

To acquire the dynamic response and design the controller of the airship, the longitudinal motion of the airship with respect to the vertical gust, which is the nonlinear system, was studied. The effects of the apparent mass and moment of the airship delay the dynamic response and the settling time, which are slower than those of conventional airplanes. The current object of the airship is designed to cruise at 500~1000m altitude. At that height, the atmospheric conditions are generally unstable by wind gust. In this paper, it has been studied for the case of vertical gust, since the apparent mass effects are dominant in has been studied for the case of vertical gust, since the apparent mass effects are dominant in that plane. In addition to the study of the dynamic responses of the airship, the controller was designed using the PID-controller. When the gust was applied, airship responses were recovered of equilibrium states. However, it takes too ling time for recovery and the speed of airship is reduced. So, the aim in this paper was to fasten the recovery speed and to get back the cruising velocity. The control parameters were determined from the stability mode analysis, and the control inputs were the thrust and the elevator deflection angle.

• Clinics in Shoulder and Elbow
• /
• v.2 no.2
• /
• pp.157-169
• /
• 1999

Eighty-nine shoulders in eighty-eight patients with traumatic unilateral anterior shoulder instability were evaluated for Rowe and UCLA scores, recurrence, return to activity, and range of motion by an independent examiner at an average of 39 months after either arthroscopic or open Bankart repair using suture anchors. The arthroscopic technique included a minimum of 3 anchors, and a routine incorporation of capsular plication and proximal shift. Twenty­six shoulders(86.6%) out of thirty in the open Bankart repair group had excellent or good results while fifty­four(91.5%) of the fifty-nine shoulders with arthroscopic Bankart repair had excellent or good results. The arthroscopic group revealed significantly better results in the Rowe(p=.041) and UCLA scores(p=.026). Two shoulders in each group developed redislocation. There were no significant differences in the loss of external rotation and return to prior activity between the two groups(p>.05). The residual instability occurred more frequently in the group of patients with lesser anchors. Arthroscopic suture anchor capsulorraphy has results equal to or better than the open Bankart procedure.