• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.367-368
• /
• 2016

본 연구는 임상에서 사용되어지는 두 가지의 불소 바니쉬를 비교연구 하였다. 또한 각각 치아표면에 10mg의 불소 바니쉬를 도포하였다. 각 대상자들의 타액의 불소이온유리농도는 1,3,12,24시간으로 채취하여 분석하였다. 각각의 불소 바니쉬를 도포한 타액 내 불소이온의 유리 누적량은 차이를 보였다. 본 연구는 현재 사용되어지는 불소 바니쉬를 선택함에 있어 기초자료로 사용될 수 있을 것이라 사료되어진다.

• Ecology and Resilient Infrastructure
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2018

Water quality is affected by the pollutants flowing into rivers since the interaction between water bodies and sediments in various environmental conditions. Especially, accumulation of sediments increases in the stagnant water areas due to a relative long hydrological retention time in the water bodies. Therefore, it is an important factor of water quality to understand characterization of the material behavior in water bodies and sediments. In this study, the objective of the conditional experiments was small and medium sized streams located in Gyeonggi-do. To estimate how the changes of fluoride behavior, depending on the pH, ion type, concentration, and clay contents. The pH results showed a trend that adsorption amount of fluorine decreased and the dissolution of fluorine increased following by pH increasing. The concentration and type of ions results showed that $Cl^-$ and $SO{_4}^{2-}$ ions had no significant effect on the adsorption ability of fluorine, the amount of dissolution was increased because $OH^-$ ion had active competition with fluorine in the reaction. The ingredient of sediment results showed that the amounts of fluoride adsorption and dissolution were reduced in samples, which contain relatively large amounts of Silt and Clay components. This means that the environmental conditions of water bodies greatly affect the adsorption and dissolution of fluoride in the sediments, so that proper management of fluoride in the sediments must precede an understanding of the environmental conditions of the water bodies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.61-64
• /
• 1977

Fluoride analysis using fluoride specific ion electrode has been carried out from sea water samples at 15 stations in the west coast of Korea. The concentration was varied from 0.83 to 1.00 ppm; ratio to chlorinity ranged from 4.60 to $5.48\times10^{-5}$. There was a tendency that the ratio to chlorinity was increased with the depth. In general the concentration was less than that of other seas.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.247-252
• /
• 2005

The typical treatment method for fluoride polluted water is the flocculation and precipitation method which usually is capable of reducing the fluoride concentration down to the level of about 10 ppm. However, this method is no longer effective for the treatment of contaminated water having less than 10 ppm of fluorides. To remove fluorides in polluted water from the fluoride concentration between 1 to 10 ppm, several adsorbents were prepared mainly based on an activated alumina and the fluoride removal efficiencies of the adsorbents were analyzed. The best fluoride removal efficiency was obtained when the activated alumina treated by sulfuric acid was used as the adsorbent. A proper calcination temperature for the sulfuric acid contained activated alumina was found to be about $500^{\circ}C$. An adsorption isotherm for the adsorbent was also obtained by using Freundlich model. The values of the constants in Freundlich isotherm model were calculated to be K=6.63 and 1/n=0.29 based on the results obtained from the series of batch type adsorption experiments.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.2
• /
• pp.89-97
• /
• 2013

The purpose of this study is to investigate fluoride release in the oral cavity from polymer adhesive tape which is NaF coated PVA. 45 healthy adults were divided into 3 groups by the type of topical fluoride applied: 60seconds taste$^{(R)}$ APF gel (group 1), FluoroDose$^{(R)}$ varnish (group 2) and NaF-PVA (group 3). Topical fluoride was applied to the facial surface of maxillary 12 teeth and unstimulated whole saliva was collected to measure fluoride release after 1, 3, 6, 12, 24, and 48 hours. Fluoride-sensitive electrode was used for measuring the fluoride concentration in the saliva samples. All three groups showed significantly higher value for fluoride concentration than the baseline after 1 and 3 hours (p < 0.05). After 6 hours, group 3 showed significantly higher fluoride concentration than the baseline (p < 0.05) and also showed significantly higher value for fluoride concentration than group 1 and group 2. Between group 1 and group 2, however, there was no significant difference statistically with respect to fluoride concentration value (p > 0.05).

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.4
• /
• pp.231-240
• /
• 2022

Objectives: This study was conducted to survey the currently available fluoride-containing oral hygiene products in Korea to provide consumers with information regarding the concentration and form of fluoride in each product, as well as to determine whether the information was easy to understand. Methods: A total of 64 types of domestic commercial oral hygiene products were purchased from an offline market and evaluated. Results: The domestic commercial toothpaste products contained fluoride in the form of sodium fluoride (NaF) and sodium monofluorophosphate (SMFP). In this study, toothpaste containing 1,000 ppm fluoride compounds accounted for the largest proportion (61.5%). Toothpastes containing below 1,000 ppm fluoride accounted for 34.6%, while toothpastes with fluoride above 1,000 ppm fluoride accounted for 3.9%. Toothpaste containing more than 1,000 ppm fluoride has not been popularized domestically. Mouthwash products contained fluoride compounds at less than 300 ppm concentration. Of the five types of mouthwash products, only two types had labels indicating fluoride concentration. In addition, the location of the labels indicating fluoride concentration differed between manufacturers and even within the same manufacturer. Conclusions: It is important to popularize toothpaste with fluoride levels above 1,000 ppm so that a broader selection of toothpaste can be offered to consumers in need. Standardized information needs to be provided for consumer convenience to aid in choosing appropriate oral hygiene products.

• Clean Technology
• /
• v.20 no.1
• /
• pp.51-56
• /
• 2014

In this study, PSf-$Al(OH)_3$ beads were prepared by immobilizating aluminum hydroxide $Al(OH)_3$ with polysulfone (PSf). The removal experiments of the fluoride ions by PSf-$Al(OH)_3$ beads were conducted batchwise and the parameters such as pH, initial fluoride concentration, and coexisting ions were investigated. The maximum removal capacity obtained from Langmuir isotherm was 52.4 mg/g and the optimum pH region of fluoride ions was in the range of 4 to 10. The removal process of fluoride ions by PSf-$Al(OH)_3$ beads was found to be controlled by both external mass transfer at the earlier stage followed by internal diffusion at the later stage. The presence of coexisting anions such as $HCO_3{^-}$, $SO{_4}^{2-}$, $NO_3{^-}$, and $Cl^-$ had a negative effect on removal of fluoride ions by PSf-$Al(OH)_3$ beads.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.338-345
• /
• 2015

Poly(phenylene oxide) (PPO) and polyether imide (PEI) were sulfonated and aminated to create sulfonated poly(phenylene oxide) (SPPO) and aminated polyether imide (APEI), respectively. Characterization of the SPPO and APEI were performed via measurements of FTIR, thermogravimetry (TGA), swelling degree, ion exchange capacity (IEC), and ion conductivity. Next, the surfaces of these membranes were modified by surface fluorination at room temperature. The surface fluorinated SPPO and APEI membranes underwent characterization again for the mentioned measurements to determine any differences. The 3 types of bi-polar membranes were prepared by varying the IEC of the APEI at a fixed SPPO IEC value, which were applied to the low and high NaCl concentration of feed solution at the different current density, respectively. The hypochlorite concentration derived from the surface fluorinated membranes was dependent on the IEC of the APEI and ranged from 491 to 692 ppm at $80mA/m^2$. At low current density of $5mA/m^2$, the hypochlorite concentrations ranged from 18 to 28 ppm for the 4 hrs surface fluorinated membranes and their durability increased greatly.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.327-336
• /
• 2011

The purpose of this study is to investigate the residual fluoride concentration of polymer adhesive tape in oral cavity which is made by spraying NaF on PVA base and to compare with Fluoride varnish(Cavityshiled$^{TM}$). Experimental groups were divided into two according to application methods; Group 1(NaF-PVA tape) and Group 2(Cavityshiled$^{TM}$). Topical fluoride was applied to 20 healthy adults aged from 25 to 30. Fluoride concentration in unstimulated whole saliva was measured by fluoride-sensitive electrode for 72 hours. 1. Until 72 hours after application in every group, significantly higher fluoride concentration was shown in saliva than baseline value(p<0.05). 2. At 2, 3 and 4 hours after application, Group 2 revealed significantly higher fluoride concentration than Group 1(p<0.05). 3. At 24, 48 and 72 hours after application, there was no significance(p>0.05). Although the residual fluoride concentration of saliva and the amount of fluoride of NaF-PVA tape are lower than those of Cavityshield$^{TM}$, NaF-PVA tape is considered to be more effective since it showed almost the same result as Cavityshield$^{TM}$. Therefore, NaF-PVA tape is expected to be a great fluoride application material.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.555-566
• /
• 2008

Hydrogeochemical study in Samseung area (Boeun, Chungbuk) and waterrock interaction experiment using rock samples from the area were performed to elucidate the fluoride source in groundwater and explaining geochemical behavior of fluoride ion. Fluoride concentration of public water supply mostly using groundwater in Boeun area was significantly higher in South Korea. The maximum fluoride concentration of the study area was 3.9 mg/L, and 23% of samples exceeded the Korean Drinking Water Standard of fluoride (1.5 mg/L). The average concentration of fluoride was 1.0 mg/L and median was 0.5 mg/L. Because of high skewness (1.3), median value is more appropriate to represent fluoride level of this area. The relationships between fluoride ion and geochemical parameters ($Na^+$, $HCO_3$, pH, etc.) indicated that the degree of waterrock interaction was not significant. However, high fluoride samples were observed in $NaHCO_3$ type on Piper's diagram. The negative relationship between fluoride and $NO_3$ ion which might originate from surface contaminants was obvious. These results indicate that fluoride ion in groundwater is geogenic origin. The source of fluoride was proved by waterrock interaction batch test. Fluoride concentration increased up to 1.2 mg/L after 96 hours of reaction between water and biotite granite. However, the relationship between well depth and fluoride ion, and groundwater age and fluoride ion was not clear. This indicates that fluoride ion is not correlated with degree of waterrock interaction in this area but local heterogeneity of fluoriderich minerals in granite terrain. High fluoride concentration in Boeun area seems to be correlated with distribution of permeable structures in hard rocks such as lineaments and faults of this area. This entails that the deep bedrock groundwater discharges through the permeable structures and mixed with shallow groundwater.