• 제목/요약/키워드: 불소의 영향

검색결과 275건 처리시간 0.034초

함산소불소화 처리된 그래핀 산화물 플레이크가 PMMA 인조대리석의 기계적 물성에 미치는 영향 (Effects of Oxyfluorinated Graphene Oxide Flake on Mechanical Properties of PMMA Artificial Marbles)

  • 김효철;전소녀;김형일;이영석;홍민혁;최기섭
    • 폴리머
    • /
    • 제36권3호
    • /
    • pp.251-261
    • /
    • 2012
  • 폴리(메틸메타크릴레이트)(PMMA) 매트릭스를 갖는 인조대리석의 기계적 강도를 향상시키기 위해 그래핀 산화물 플레이크(GOF)를 충전제로 사용하여 나노컴포지트를 제조하였다. 충전제로 사용한 GOF는 흑연을 Hummers법으로 산화한 후 열처리에 의해 박리시켜 제조하였다. PMMA 매트릭스와의 계면혼화성을 향상시키기 위하여 다양한 산소:불소 조성의 함산소불소화 처리로 GOF 계면을 개질시켰다. 산소함량 50% 이상에서 함산소불소화 처리한 GOF를 충전제로 사용한 나노컴포지트는 기존 인조대리석에 비해 굴곡강도, 굴곡탄성률, Rockwell경도, Barcol경도, Izod충격강도 모두 현저히 증가하였다. 적절히 함산소불소화 처리된 GOF는 PMMA 매트릭스와의 계면접착력이 우수함을 파단면의 모폴로지로부터 확인하였다. 하지만 GOF 충전제의 함량이 0.07 phr 이상으로 증가하면 충전제의 분산이 균일하지 못하여 인조대리석의 기계적 강도는 오히려 감소하는 경향을 나타내었다.

Pulsed Nd:YAG 레이저 조사와 불소화합물 도포가 치아 내산성에 미치는 영향 (Effects of Pulsed Nd:YAG Laser Irradiation and Fluoride Compound Applicatin on Acid Resistance of Bovine Teeth)

  • An-Hee Lee;Woo-Cheon Kee
    • Journal of Oral Medicine and Pain
    • /
    • 제20권2호
    • /
    • pp.429-447
    • /
    • 1995
  • This study was designed to determine the most effective concentration of fluoride and levels of laser irradiation for the remineralization of decayed teeth. After irradiation with a pulsed Nd:YAG laser and the topical application of fluoride, phosphate and fluoride concentration in enamel were measured. And then the changes on surface enamel using an scanning electron microscope were observed. Samples by extraction healthy, permanent, mandibular bovine teeth with no caries were obtained. Among them 371 healthy samples were selected and artificial carious lesions were made. 20 samples were assigned to each experimental group. After irradiation with a pulsed Nd:YAG laser with total energy densities of 10J/$\textrm{cm}^2$, 20J/$\textrm{cm}^2$ for each group. On the teeth, 2% NaF, 1.9% NH4F, 1.6% TiF4 Elmex gel(amine fluoride) and 1.23% APF gel were applied. After pH circulatory procedures, concentrations of fluoride with and Ionalyzer (Orion Research, Model 901, USA) and phosphates with an Uv/V is spectrophotometer (Uvikon 860, Kontrom Co, Switzerland) were measured. By etching the teeth in layers and measuring fluoride concentrations, a profile of fluoride penetration according to depth could be developed. And also the changes on the surface of the enamel using an electron scanning microscope were observed. The comparative analysis yielded the following results : 1. Phosphate concentration was low in all groups compared with the control group except for teeth treated Elmex gel, irradiated with 10J/$\textrm{cm}^2$ and 30J/$\textrm{cm}^2$ energy densities. Teeth treated with APF gel and 30J/$\textrm{cm}^2$ irradiation gad the lowest phosphate concentration. 2. Among all groups, fluoride concentrations in tooth enamel were highest in APF gel and NaF groups irradiated at 30J/$\textrm{cm}^2$. The APF gel group had the highest fluoride concentrations across all energy densities. 3. In the APF gel group, and the NaF group, the greater the energy density of the laser, the higher the fluoride concentrations in the enamel. 4. In all groups, the concentration of fluoride in the enamel by depth tended to decrease with depth. 5. Under the scanning electron microscope, under the condition of irradiation with 20J/$\textrm{cm}^2$, enamel crack was detected for the first time. In the NH4F group, spherical deposits were found on the surface of the enamel, and in the TiF4 group the surface of enamel was covered with an irregular, thin membranous mass in places. In the APF gel and NaF groups irradiated with 10J/$\textrm{cm}^2$, spherical and irregular particles covered the teeth. When these groups were irradiated at 20J/cm2, they were covered with amorphous crystals. These results suggest that one could obtain more effective anticariogenic effects without damage to teeth when less than 20J/$\textrm{cm}^2$ energy densities and APF gel are used.

  • PDF

노인 구강건강 수준과 구강건강관련 삶의 질의 관련성 (Association between Oral Health and Oral Health-Related Quality of Life among the Elderly)

  • 김미화;김경원;이경수
    • 치위생과학회지
    • /
    • 제14권4호
    • /
    • pp.488-494
    • /
    • 2014
  • 본 연구는 경상북도 일개 도 농 복합시의 보건소에서 실시하는 노인 불소도포, 스케일링사업에 참여한 65세 이상 노인을 282명을 대상으로 하였다. 자료수집 기간은 2011년 1월부터 12월까지로 연구의 목적과 내용 및 취지를 설명하고 자발적인 연구 참여에 동의한 사람들을 대상으로 하였다. OHIP-14 설문 문항은 5점 만점으로 측정하였으며, 점수가 높을수록 구강건강 삶의 질이 낮아지는 것을 의미하며, 다음과 같은 결과를 얻었다. 1. 치아우식증 개수가 적을수록, 잔존치아 수와 일일 칫솔질 횟수가 많을수록, 의치를 장착하지 않은 그룹에서 구강건강 삶의 질이 유의하게 높았다. 2. 사회경제적 특성에 따른 구강건강관련 삶의 질의 하위영역 점수를 비교한 결과, 기능적 제한 점수는 학력이 높을수록 적었다. 신체적 동통 점수는 나이가 많을수록, 학력이 낮을수록 더 많이 느끼고 있었다. 신체적 능력저하는 학력이 낮을수록 더 많이 느끼고 있었다. 3. 구강건강상태와 칫솔질 횟수에 따른 구강건강관련 삶의 질의 하위영역 점수를 비교한 결과, 기능적 제한과 신체적 동통, 정신적 불편, 정신적 능력저하, 사회적 능력저하, 사회적 불리 점수는 치아우식증 개수가 많을수록 삶의 질이 낮았고, 잔존치아가 많을수록, 의치장착을 하지 않은 그룹에서 삶의 질이 좋았다. 4. 구강건강관련 삶의 질에 영향을 미치는 요인을 규명하기 위한 다중회귀분석 결과 충치의 개수와 의치장착이 유의한 변수로 나타났다. 이 연구결과 노인들의 구강건강상태의 수준과 노인들의 삶의 질이 유의한 관련성이 있는 것으로 나타났다. 구강건강 삶의 질을 유지하기 위하여 나이가 들더라도 잔존치아 수를 많이 유지할 수 있도록 하고, 필요한 경우에는 의치를 장착할 수 있도록 지원하는 것이 중요하다.

불소 및 레이저가 우치법랑질의 인공우식병소에 미치는 영향 (Effect of Fluoride and Laser on Artificial Caries-like Lesion Formation in Bovine Enamel)

  • 김재곤;백병주;주훈;윤현두
    • 대한소아치과학회지
    • /
    • 제24권3호
    • /
    • pp.660-677
    • /
    • 1997
  • The purpose of this study was to examine the morphological characteristics and combined effects of fluoride application and laser irradiation on artificial caries-like lesion formation in bovine enamel. Enamel specimens were divided into five experiment group and placed in no-treatment(group C), APF application alone(group F), laser irradiation alone(group L), APF application before laser irradiation (group FL), and APF application after laser irradiation(group LF) on artificial caries-like lesion. Sound enamel was used as a control group. The ultrastructural changes and physical effects of the fluorided and lased enamel has been investigated by using SEM, enamel solubility and microhardness test as well as distributions of calcium, phosphorus and fluoride in internal enamel by using EPMA. The following results were obtained. 1. In the all experiment groups, the amounts of dissolved calcium of enamel surfaces significantly decreased according to increasing exposure time of acid solution than control group(P<0.001). Group L showed higher than that group FL and LF in 30 and 60min(P<0.05). 2. The microhardness values of enamel surface in the control group was highest than that in the other experiment groups. Group F, L, FL and LF were significantly increased than group C(P<0.001). The enamel surface treated with APF produced deposites of numerous small globules and lased enamel showed a cracker-like appearance with microcrack and small pore. Numerous deposits were infiltrated in the fissured portion of enamel treated with APF after laser irradiation. 4. In the case of APF application alone, the elevation of the fluoride profile can be seen within $5{\mu}m$ of the outermost layer and a similar profile observed in the specimen treated with APF before laser irradiation. However, the specimen treated with APF after laser Irradiation showed a large elevation within $10{\mu}m$ of the outermost layer of the enamel. 5. The higher Ca/P ratios were observed in $10{\mu}m$ depth of lased and fluorided enamel when compared to the sound and carious enamel. The fluoride content decreased rapidly with distance from enamel surface, in the group F, fluoride concentration was significantly higher than that in the group C, L, FL, LF and control group according to increasing enamel depth (P<0.05).

  • PDF

급속상악확대술 시행 후 지대치와 지지골 표면에 나타나는 치근흡수의 불화나트륨 단독투여를 통한 예방에 대하여 (The effect of NaF on bone and tooth resorption around an anchor tooth during a rapid maxillary expansion procedure)

  • 민승기;정규림
    • 대한치과교정학회지
    • /
    • 제34권6호
    • /
    • pp.526-536
    • /
    • 2004
  • 본 연구는 급속상악확대술 시행 후 보정기간중에 지대치의 압박측 치근흡수에 불화나트륨의 경구 투여가 영향을 미치는지를 알아보기 위하여 시행되었다. 이차성징을 아직 나타내지 않은 10마리 소아기 암캐에 견치를 주지대치로 사용하는 주조형 상악 확대장치를 제작, 장착하였다 상악확대장치는 20일간에 걸쳐 5mm 확장시켰으며, 교합면 방사선사진을 이용하여 정중구개봉합의 이개를 확인하였다. 실험동물은 실험군 5 마리와 대조군 5 마리로 나뉘었으며, 보정기간 중 실험군에는 2.2 mg/kg/day의 불화나트륨 (불소로서 1.0mg/kg/day)을 캅셀제의 형태로 1 일 2 회로 나누어 단독 경구 투여하였다. 실험동물들을 보정 후 0 일, 15 일, 30 일, 45 일, 및 60 일째에 각 군당 한 마리씩 배정하여 충분한 마취로 희생시킨 후 상악골을 절취하였다. 이후 실험동물의 좌측 상악 견치의 압박측 치근표면과 압박측 견치 협면을 덮고 있던 골 조직의 치아측 표면을 주사전자현미경을 이용하여 관찰하였다. 본 실험에서 압박측 치근표면을 관찰한 결과 45일 보정군과 60일 보정군의 대조군에서 흡수소와가 발현되는 빈도가 높았다. 지대치 압박측 치근을 덮는 골면에 나타나는 흡수소와의 발현은 30일의 보정기간 이후부터 실험군에서 적게 나타남을 알 수 있었다. 차후 급속상악확대술을 시행하는 경우 효과적인 NaF의 투여시기와 용량에 대한 검증이 필요하리라 생각된다.

Pulsed Nd : YAG 레이저 조사와 불소 화합물 도포가 초기 우식 법랑질의 표면 경도에 미치는 영향 (Effects of Pulsed Nd:YAG Laser Irradiation and Fluoride Compound Application on Surface Hardness of Incipient Carious Lesion in Enamel of Bovine Teeth)

  • Jun-Bong Kwag;Woo-Cheon Kee
    • Journal of Oral Medicine and Pain
    • /
    • 제21권2호
    • /
    • pp.207-224
    • /
    • 1996
  • This study was designed to determine the most effective concentration of fluoride and energy density of laser irradiation for the anticarious effect. For this study surface hardness in enamel was measured before and after irradiation with pulsed Nd;YAG laser and the topical application of fluoride. Of the permanent mandibular anterior hovine teeth, healthy, carious free ones were used. Three hundred specimens were made. Specimens within 25~45 Vickers hardness numbers were assigned to 20 control and experimental stoops ; each containing 15 specimens. After forming artificial carious lesions, 10 J/$\textrm{cm}^2$, 20 J/$\textrm{cm}^2$, and 30 J/$\textrm{cm}^2$ energies were irradiated on the enamel surface of each experimental group. Also NaF, NH4F, Elmex gel(amine fluoride) and APF gel fluoride compounds were applied topically. Next, all the specimens were placed into the pH circulatory procedures for eight days. Vickers hardness numbers were measured using a microhardness tester. Surface changes of the enamel were observed using an scanning electron microscope. The comparative ana1ysis yielded the following results : 1. The reduction of surface hardness of the enamel surface was less in all groups with fluoride application than in the group without fluoride application. 2. The APF gel croup with 10 J/$\textrm{cm}^2$ irradiation showed the lowest reduction of surface hardness. 3. The reduction of surface hardness of the enamel surface in the group of laser irradiation without fluoride application not showed any significant difference according to the energy density of the laser. 4. Under the scanning electron microscope, in enamel irradiated with 10J/$\textrm{cm}^2$ showed appearance similar to acid etching surface. In enamel irradiated with 20 J/$\textrm{cm}^2$, line enamel crack was detected. In enamel irradiated with 30j/$\textrm{cm}^2$, severe enamel crack and fusion of enamel were detected. These results suggest that one could obtain the best anticariogenic effects without damage to teeth in the group of application of APF gel after laser irradiation with 10 J/$\textrm{cm}^2$.

  • PDF

$Mg_2$Ni계 수소저장합금전극의 퇴화거동에 미치는 불화 처리 영향 (Effects of F-treatment on the Degradation of $Mg_2$Ni type Hydrogen Storage Alloy Electrode)

  • 김준성;최재웅;이창래;강성군
    • 한국재료학회지
    • /
    • 제11권4호
    • /
    • pp.294-299
    • /
    • 2001
  • 기계적 합금화 방법을 이용하여 제작한 Ni-MH 전지용 $Mg_2$Ni전극의 표면 불화처리에 대한 전기화학적 충.방전 특성이 조사되었다. 20시간 밀링을 통해 제조된 $Mg_2$Ni합금은 나노결정을 가졌으며 그 $Mg_2$Ni전극의 KOH전해질내에서 충.방전 실험 결과, 초기 방전 용량이 280mAh/g이상으로 증가하였으나 10cyc1e이내에 급격히 퇴화되었다. 전극표면에서 지속적이고 안정한 불화층 형성을 목적으로 KOH용액에 잉여의 불소이온이 첨가된 $Mg_2$Ni전극의 내구성은 크게 향상되었으며 특히 2N KF를 첨가했을 경우 전극의 내구성이 가장 크게 향상되었다. 고율 방전실험의 경우도 그 성능이 90-100mAh/g으로 유지되었다 이러한 내구성 향상의 이유는 표면에 얕고 다공성인 $Mg_2$Ni층의 형성으로 인해 퇴화의 주요인인 Mg(OH)$_2$의 생성이 억제되었기 때문이었다. Effects of the surface fluorination on the electrochemical charge-discharge properties of $Mg_2$Ni electrode in Ni-MH batteries fabricated by mechanical alloying were investigated. After 20h ball milling, Mg and Ni powder formed nanocrystalline $Mg_2$Ni. Discharge capacity of this alloy increased greatly at first one cycle, but due to the formation of Mg(OH)$_2$ passive layer, it showed a rapid degradation in alkaline solution within 10cyc1es. In case of 6N KOH +xN KF electrolyte (x = 0.5, 1, 2), a continuous and stable fluorinated layer formed by adding excess F$^{-}$ ion, increased durability of $Mg_2$Ni electrode greatly and high rate discharge capability(90-100mAh/g). 2N KF addition led to the highest durability of all tested here. The reason of the improvement is due to thin MgF$_2$, which can prevent the $Mg_2$Ni electrode from forming Mg(OH)$_2$layer that is the main cause of degradation.

  • PDF

음식폐기물의 양돈사료 자원화를 위한 처리공정 및 사료가치 평가 (Processing Method and Feed Value of Food Wastes as Swine Feed Resources)

  • 정우진;이정채;김태환;임계택
    • 한국환경농학회지
    • /
    • 제19권1호
    • /
    • pp.44-50
    • /
    • 2000
  • MS균을 이용한 음식폐기물의 효율적인 처리 방법의 모색과 양돈사료 자원화를 위한 기초자료를 확보하고자 처리방법에 따른 사료성상, 조성분, 광물질 및 유해 중금속을 분석한 결과 다음과 같은 결론을 얻었다. MS균을 처리하기전 수거된 음식폐기물은 그 배출원과 수집일에 따라 성상 및 조성분 성분이 다양하였으며, 음식폐기물 집하장에서 건조처리전 수거된 시료의 수분 함량은 계절적 요인에 크게 영향을 받았다. MS균에 의한 발효 공정을 거친 후 음식폐기물의 악취가 거의 소멸되었고, 사료로서의 좋은 성상을 보여주었다. 특히, 조지방 및 조단백질 함량이 높은 사료자원으로 평가되었다. MS균 처리 후 음식폐기물의 광물질 함량 분석결과 다량원소 (특히 칼슘)의 함량이 곡류나 농산부산물보다 높았다. 전반적으로 다른 식물성 및 동물성 단미사료원에 비해 균형있는 광물질 구성 및 함량을 가지는 것으로 분석되었다. MS균 처리 전과 후 처리과정 중 음식폐기물내의 중금속 분석결과 수은, 비소, 불소 및 크롬은 미검출되었고 납과 카드뮴은 미량존재하나 배합사료내 허용범위에 훨씬 낮은 수준을 함유하고 있어 사료자원으로의 재활용함에 있어 안전한 것으로 나타났다. 이상의 결과로부터 음식폐기물의 성상 및 사료성분을 고려할 때, 적절한 처리 및 발효공정을 통해 양돈사료자원으로서 재활용될 수 있는 충분한 가치가 있음을 제시한다.

  • PDF

PFA 및 MWCNT의 기핵효과에 의한 경질 폴리우레탄 폼의 물성 변화에 대한 연구 (A Study on the Property Changes of Rigid Polyurethane Foams by Nucleating Effects of PFA and MWCNT)

  • 안원술
    • 한국산학기술학회논문지
    • /
    • 제16권4호
    • /
    • pp.2945-2950
    • /
    • 2015
  • 경질 폴리우레탄 폼(RPUF) 제조에서의 단열성 향상을 위하여 사용되는 PFA (Perfluoroalkane)는 액상의 발포 기핵제로서 성능은 뛰어나지만 매우 고가일 뿐만 아니라 불소화합물로서 환경 유해성 물질이다. 따라서 이를 대체할 수 있는 고성능의 대체 기핵제 개발에 대한 많은 연구가 진행되고 있다. 본 연구에서는 이에 대하여 다중벽 탄소나노튜브(MWCNT)를 고상 기핵제로 사용하여 제조한 샘플에서의 셀 크기 및 단열 성능과 기계적 물성에 미치는 영향을 비교 연구하여 보고자 하였다. 셀의 평균크기는 $165.6{\mu}m$에서 $162.9{\mu}m$로 상대적으로 더 작아졌으며, 표준 편차 역시 각각 45.6 및 35.2로서 상대적으로 더 균일한 셀 크기 분포를 가진 것으로 나타났다. k-factor 값 역시 0.01763 및 $0.01745kcal/m.hr.^{\circ}C$의 값으로서 1.02%가 감소된 더 작은 값을 나타내었다. 또한 압축 응력 시험에서의 초기 모듈러스는 상대적으로 더 큰 값을 나타내었으나 압축항복 응력은 약 $0.030{\times}105Pa$로서 거의 같은 값을 나타내었다. 이러한 결과들로 부터 MWCNT는 매우 우수한 기핵제로 작용함을 알 수 있었고, 따라서 소량의 MWCNT를 기핵제로 사용하여 경제적이면서도 우수한 단열효과와 기계적 물성을 지닌 친환경적인 경질 폴리우레탄 폼을 제조할 수 있음을 알 수 있었다.

pH 4.3에서 재광화 용액의 포화도에 따른 인공 탈회된 법랑질의 동력학적 변화 (THE DYNAMIC CHANGE OF ARTIFICIALLY DEMINERALIZED ENAMEL BY DEGREE OF SATURATION OF REMINERALIZATION SOLUTION AT pH 4.3)

  • 이지숙;노병덕;신수정;이윤;공형규;이찬영
    • Restorative Dentistry and Endodontics
    • /
    • 제34권1호
    • /
    • pp.20-29
    • /
    • 2009
  • 법랑질의 재광화에 영향을 주는 요인으로는 pH, 불소 농도, 포화도 등이 있다. 본 연구에서는 유산 완충 탈회용액을 이용하여 법랑질 시편을 인공 탈회시킨 후, pH 4.3에서 포화도를 0.22, 0.30, 0.35로 달리한 세가지 재광화 용액에 10일간 처리하여 나타나는 변화를 편광현미경으로 관찰하여 전체 탈회 깊이와 건전 표층 폭의 변화를 조사하였다. 또한 Image program (Scion Image analyzer)을 이용하여 병소 부위의 평균 mineral density를 측정하여 탈회와 재광화 후 무기질 변화량을 통해 인공 탈회된 법랑질의 동력학적 변화를 관찰하였다. 1. 재광화 후 모든 군에서 건전 표층의 폭이 증가하였는데, 포화도가 증가할수록 건전 표층 폭이 증가하였다 (P<.05). 2. 재광화 후 mineral density 변화를 관찰한 결과, 포화도가 낮은 군에서는 이온의 침착이 병소 전반적으로 일어났으나, 포화도가 높은 군에서는 건전 표층 부위와 표층하 병소의 하층부에서 이온의 침착으로 mineral density 가 증가하였고 표층하 병소의 상층부에서는 탈회가 진행되어 mineral density 가 감소하였다. 3. 재광화 후 모든 군에서 무기질량이 증가하였고 전체 탈회 깊이도 증가하였으나 각 군간에 통계적 유의차는 없었다. 본 실험에서 인공 탈회된 시편을 pH 4.3인 재광화 용액에 처리시 포화도가 높을수록 건전 표층에서 더 많은 재광화 현상이 일어났고 표층하 병소에서는 재광화 현상이 적게 일어났으며, 재광화 후 모든 군에서 전체 탈회 깊이는 증가하였다.