• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.31-37
• /
• 2005

The aim of this study was to evaluate the effectiveness of sealer placement in simulated root canal extensions. Forty resin blocks were attained from the Endo-training Bloc. In each block. The simulated root canal was made with $\#20$, 80taper GT file. After each block was longitudinally split into two halves, a standardized groove was prepared on one canal wall of two halves to simulate the canal extensions with various irregularities. The two halves of each block were assembled and all simulated root canals were obturated by single cone method with AH26 sealer. Four different methods of sealer placement were used: group A, $\#20$ K-file; group B, ultrasonic file; group C, lentulo spiral; group D, EZ-Fill bi-directional spiral. All obturated blocks were stored in $100\%$ humidity at $37^{\circ}C$ for 1 week, Using a low speed saw, each block was sectioned horizontally. Images of the sections were taken using a stereomicroscope at $\times$ 30 magnification and a digital camera. The amount of the sealer in the groove was evaluated using a scoring system, a higher score indicated better sealing effectiveness. The data was statistically analysed by Fisher's Exact Test. The sealing score was the lowest, specially at the middle area of canal extensions in group A, and that was statistically significant difference from other groups. In conclusion, the ultrasonic file, lentulo spiral and EZ-Fill bi-directional spiral were effective methods of sealer placement in simulated canal extensions. The K file was the least effective method, specially at the middle area of canal extensions.

• Proceedings of the KSPS conference
• /
• 2003.10a
• /
• pp.65-68
• /
• 2003

본 논문에서는 대화체 연속음성인식 과정에서 사용되는 다중발음사전의 개념을 확장하여 대화체 발화에 빈번하게 나타나는 불규칙한 발음변이 현상을 포용하도록 한 확장된 발음사전의 방법을 적용하여 대화체 연속음성인식에서 인식성능의 향상을 가져오게 됨을 실험을 통해 보여준다. 대화체 음성에서 빈번하게 나타나는 음운축약 및 음운탈락, 전형적인 오발화, 양성음의 음성음화 등의 발음변이는 언어모델의 효율성을 떨어뜨리고 어휘 수를 증가시켜 음성인식의 성능을 저하시키고, 또한 음성인식 결과로 나타나는 출력형태가 정형화되지 못하는 단점을 가지고 있다. 이에 이러한 발음변이들을 발음사전에 수용할 때 각각의 대표어휘에 대한 변이발음으로 처리하고, 언어모델과 어휘사전은 대표어휘만을 이용해 구성하도록 한다. 그리고, 음성인식기의 탐색부에서는 각각의 변이발음의 발음열도 탐색하되 대표어휘로 언어모델을 참조하도록 하고, 인식결과를 출력하도록 하여 결과적으로 인식성능을 향상시키고, 정형화된 출력패턴을 얻도록 한다. 본 연구에서는 어절단위 뿐 아니라 의사형태소[2] 단위의 발음사전에도 발음변이를 포용하도록 하여 실험을 하였다. 실험을 통해 어절단위의 다중발음사전 구성을 통해 ERR 10.9％, 의사형태소 단위의 다중발음 사전의 구성을 통해 ERR 4.3％의 성능향상을 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.303-303
• /
• 2020

국내의 주요 외곽시설은 대수심화 및 설계외력의 증대 등으로 경제성 및 안정성 등의 확보를 위해 혼성제 형식의 구조물을 적용하는 사례가 주를 이루고 있다. 혼성제 근고부 안정성과 관련해서는, 설계파에 대한 안정적인 피복재 중량을 구하는 것이 설계상 중요하다. 기존의 직각 입사파에 대한 연구는 많이 수행되어 왔으나, 경사 입사파 조건에 대한 검토 사례는 미미한 실정이다. 또한 직각입사 뿐만 아니라 경사 입사파에 대한 근고부 중량산정식으로 확장된 Tanimoto식을 적용하고 있으나, 수리실험과 중량산정식에 대한 오차가 발생하고 있어 수리실험을 통해 기존의 산정식에 대한 검토가 필요하다. 따라서 본 연구에서는 경사입사파 조건에 따른 혼성제 제두부 구간의 피복재 안정성에 대하여 실험을 수행하였다. 설치수심은 0.3m 수심으로 고정하고, 입사각도를 0°, 30°, 45°, 60° 및 75°로 변화시켜 실험을 수행하였다. 전체 연장 10m의 모형에서 종점부 1m 구간을 실험구간으로 설정하고, 피복재의 종류는 피복석(50g), 콘크리트 피복블록(Tetrapod, Tripod)를 사용하였으며, 파랑조건은 불규칙파를 적용하였다. 주기 및 파고를 변화시켜 수리실험을 수행하였다. 실험결과는 제두부 구간에 피복된 피복재의 구간별 피해율을 분석하기 위해 구역분할도 적용하였으며, 확장된 Tanimoto식과 비교분석하여 중량산정식의 타당성을 검토하였다.

• Journal of Oral Medicine and Pain
• /
• v.26 no.3
• /
• pp.205-214
• /
• 2001

오늘날 스트레스라는 단어는 모든 현대인과 방송, 언론매체에서도 매일 거론되어질 정도로그 중요성이 대두되고 있다. 의학계에서도 스트레스를 단순한 심리적 문제로 국한시키지 않고 과도한 스트레스가 지속될 경우 신경계와 내분비계, 면역계의 변화를 초래해 인체의 항상성에 영향을 미쳐 질병을 일으킨다는 것을 인식하고 있으며 이에 대한 연구가 진행되고 있다. 이러한 질병의 발생과정에서 생체의 일부조직이 파괴됨으로써 기능과 형태변화가 초래될 때 apoptosis가 관여하고 있으며 이에 본 저자는 스트레스와 구강악안면영역에서 발생할 수 있는 질병과의 상관관계를 규명하기 위해 이종의 한냉 스트레스와 다소의 굴신을 허용한 중등도의 구속 스트레스를 부여한 후 측두하악관절 활막의 변화를 전자현미경관찰을 통해 밝혀내고자 한다. Sprague-Dawley계 웅성 백서(200-230 g/bw) 33마리를 구속스트레스부여군 (12마리), 한냉스트레스부여군 (12마리) 및 정상군 (3마리)으로 나누고 이들을 각각 구속장치에 구속한 후 1, 3, 5, 7일에 각각 희생시켰으며 측두하악관절 활막의 변화를 전자현미경으로 관찰하였다. 그 결과는 다음과 같다. 1. 중등도의 구속스트레스군에서 사립체는 부분적으로 농축된 소견을 보였으며 수와 크기에 있어 시간이 지남에 따라 점차 감소하는 소견을 보였다. 2. 중등도의 구속스트레스군에서 과립내형질망은 점점 확장되었으며 불규칙한 형태를 나타내었다. 3. 중등도의 구속스트레스군에서 물결모양의 핵막의 이중구조가 7일군에서 관찰되었다. 4. 한냉 스트레스군에서 사립체는 1일, 3일군에서 약간 부푼 형태를 가지고 그 수가 다소 감소되었으나 시간이 지남에 따라 5일, 7일군에서 건강한 모양으로 점차 증가되었다. 5. 한냉 스트레스군에서 과립내형질망은 1일, 3일군에서 불규칙하게 확장된 소견을 보였으나 5일, 7일군에서는 잘 발달된 형태로 핵 주위에서 다수 관찰되었다. 6. 한냉 스트레스군에서 핵은 전 기간에 걸쳐 큰 변화를 보이지 않았다. 이와 같은 결과를 토대로 측두하악관절 활막조직은 한냉 스트레스 및 중등도의 구속 스트레스에 대하여 중등도의 저항성을 가지고 있는 것으로 생각되며 생리적 적응한계를 넘는 과도하고 지속적인 스트레스에 의하여 활막조직이 apoptosis되어 측두하악관절에 병리적 변화를 초래할 가능성이 있다고 사료되어 이후 지속적인 연구가 요구된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.174-183
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (II).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.160-173
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (I).

• The Korean Journal of Petroleum Geology
• /
• v.9 no.1_2 s.10
• /
• pp.16-23
• /
• 2001

The study area in the East Sea is located on the northeastern margins of the Ulleung Basin near the Kita-Yamato Bank. The research area provides the important clue to the development of Miocene basins which are characterized by the normal faults and volcanic activities related to rifting in the continental crust. Kita-Yamato Bank is a small sediment-filled graben which was formed by failed rifting in the Early Miocene. The basins rapidly vary the bathymetry, depth of acoustic basement and thickness of sedimentary layer. The tension in the study area caused the extensional lithospheric deformation before/during the Early Miocene. In consequence, tectonic forces resulted in the depression or subsidence of basement from continental rifting in the Kita-Yamato Bank followed by the opening of the Ulleung Basin, and caused the onset of graben or half-graben structure bounded by large blocked syn-rift faults. Afterward no significant tectonic deformation exists, with the consequence that post-rift normal faults with small heave were formed and reactivated by the resultant forces such as tectonic subsidence, sediment loading and volcanic activity. The Cenozoic sediment layer has a maximum thickness of 1.0 s along the center of the graben or half-graben, which overlies the consolidated acoustic basement. Seismic units V and IV supposed to be syn-rift sedimentary rocks are deformed by both the volcanic activities and numerous basement-involved normal faults induced from extension. In the uppermost layer, slump scars resulted from the slope failure are recognized.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.153-162
• /
• 1996

Rapid maxillary expansion is widely used for the correction of anteroposterior discrepancies, constriction of the maxillary arch, etc. This experiment was undertaken to examine the serial changes in the osteogenesis as well as the collagen fiber bundles in the intermaxillary suture during the rapid maxillary expansion treatment. Four young female dogs aged 6 to 8 months old and not showing menarche yet were used for the experiment. The maxillary impression of dogs were taken, expansion device cast and Hyrax screw soldered at the midline in the 1st premolar area. RME device was delivered to the dogs and the activation of 0.25 mm per quarter-turn was done 2 times per day for 10 days until 5 mm separation was made. Separation of the maxilla was confirmed by X-ray. The animals were sacrificed on 0, 15, 30, 60 days from the finish of maxillary separation and preparations for light microscopy and surface electron microscopy were made. The sutures were cut into frontal serial sections for examination of the histological reactions. The following results were obtained and the conclusions made. 1. The edges of the two palatal plates bordering the midpalatal suture which at the beginning of the retention period were mainly composed of compact bone, underwent extensive resorption followed by new bone formation and gradually became spongy bone rich in bone marrow which in the 60 day retention animal became the compact bone with short intermaxillary suture space. During this transformation, newly formed trabecular bone tissues were added to the original margin. 2. Throughout the expansion period, the collagen fibers underwent successive changes such as stretching, loss of polarity, and finally fibrillogenesis. Towards the end of the expansion procedure, sharpey's fiber formation in newly formed bones were observed. 3. Bony spicules were found in the initial stage of retention on occlusal topographic X-rays, which later were confirmed to have ossified. 4. Judging from the histological changes occuring during the experimental expansion, excessive expansion will cause an excessive bleeding, and retard the remodeling of intermaxillary suture. According to the above results, the bone remodeling after rapid maxillary expansion was preceded by the migration of migratory cells into the intermaxillary suture area. The bone remodeling phenomena were on-going during the 2 months retention sample.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.208-213
• /
• 2007

A 15 kg 6-year-old intact male Jindo dog with a history of a respiratory distress, hindlimb paralysis with necrosed skin of dorsal digit for three weeks was referred to Animal Medical Center, Chonbuk National University. Heartworm infection was identified by kit examination. In plain thoracic radiographs, dilated pulmonary arteries reverse D sign and focal interstitial pattern was compatible with heartworm infection and possible pulmonary thromboembolism. Abdominal radiographs showed poor serosal detail indicating fluid accumulation within peritoneal cavity. No evidence of musculoskeletal abnormalities was found. Ultrasonography presented focal wedge-shaped hyperechogenecity on the both poles of left kidney, weak or absent pulse on the distal to the external iliac artery as well as ascites and irregular liver margin. Multi-organ failure was strongly supposed by blood profile including leukocytosis, anemia, hemoglobinuria bililubinemia, hypoalbuminemia, imbalance of electrolytes, and increased hepatic and renal function values. Interestingly, the glucose level is remarkably lower in pelvic limb compared to thoracic limb. Suspected pulmonary thromboembolism, renal infarction and femoral arterial embolization causing hindlimb paralysis and dermatic necrosis were confirmed by 3D reconstructed CT imaging. Prior to taking a consideration of euthanasia, interventional radiology was experimentally attempted but failed due to not recovered from general anesthesia. Early and accurate diagnosis of thromboembolism is valuable and 3D reconstructed CT images might be very useful to show the correct way to treat effectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.585-593
• /
• 2010

Geographic routing has been considered as an efficient, simple, and scalable routing protocol for wireless sensor networks since it exploits pure local location information instead of global topology information to route data packets. Geographic routing requires the sources nodes to be aware of the location of sinks. Most existing geographic routing protocols merely assume that source nodes are aware of the locations of sinks. How can source nodes get the locations of sinks was not addressed in detail. In this paper, we propose a sink location service via circle path for geographic routing in wireless sensor networks. In this scheme, a sink sends a Sink Location Announcement (SLA) message along a circle path, and a source node sends a Sink Location Query (SLQ) message along a straight path that certainly passes through the circle path. By this way we can guarantee the SLQ path and SLA path have at least one crossing point. The node located on the crossing point of the two paths informs the source node the sink location. This procedure can correctly work in any irregular profile sensor networks such as network that has holes or irregular shape by some rules. Simulation results show that our protocol is superior to other protocols in terms of energy consumption and control overhead.