• Title/Summary/Keyword: 분해 법칙

Search Result 68, Processing Time 0.028 seconds

Time-resolved Analysis for Electroconvective Instability under Potentiostatic Mode (일정 전위 모드에서의 전기와류 불안정성에 대한 시간-분해 해석)

  • Lee, Hyomin
    • Korean Chemical Engineering Research
    • /
    • v.58 no.2
    • /
    • pp.319-324
    • /
    • 2020
  • Electroconvective instability is a non-linear transport phenomenon which can be found in ion-selective transport system such as electrodialysis, Galvanic cell and electrolytic cell. The instability is triggered by the fluctuation of space charge layer in adjacent of ion-selective surface, leading to increase of mass transport rate. Thus, in the aspect of mass transport, the instability has an important meaning. Although recent experimental techniques have opened up an avenue to direct visualize the instability, fundamental investigations have been conducted in limited area due to several experimental limitations. In this work, the electroconvective instability under potentiostatic mode was solved by numerical method in order to demonstrate correlation between current-time curve and the instability behavior. By rigorous time-resolved analysis, the transition behaviors can be divided into three stages; formation of space charge layer - growth of electroconvective instability - steady state. Furthermore, scaling laws of transition time were numerically obtained according to applied voltage as well.

Hydraulic stability evaluation for deep tunnel on continuous precipitation (연속강우에 대한 대심도 터널의 수리적 안정성 평가)

  • Oh, Jun Oh;Park, Jae Hyeon;Park, Chang Keun;Jun, Sang Mi
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.99-99
    • /
    • 2016
  • 최근 홍수의 특성과 피해 양상은 과거와는 다르게 변화하고 있으며, 급격한 도시화로 인하여 기존 하천유역의 저류 능력이 감소하였는데 이러한 한계를 극복하기 위하여 이미 외국에서는 대심도 터널을 활용한 홍수재해 관리방안이 오래전부터 활용되어 왔다. 본 연구에서는 현재 서울시에 건설중인 '신월 빗물저류배수시설' 연속강우 시 대심도 터널의 수리적 안정성 평가와 운영방안 수립을 위한 수리모형실험을 실시하였다. 모형은 Froude 상사법칙을 사용하여 원형의 1/50크기로 제작하였다. 모형의 전체 저류 가능량은 모형기준 $2.78m^3$ (원형 $347,778m^3$)이며, 터널 내 잔류수는 전체 저류 가능량의 0 ~ 100%까지 10%씩 변화시켜 실험 CASE를 선정하였다. 각 실험CASE별 수직 유입구 안정성 평가를 실시한 결과 터널 내 잔류수가 10%~80%까지 존재 할 때는 저지수직구1에서의 압축공기 폭발현상으로 인한 월류현상이 발생하였으며, 10%~40%까지는 저지수직구2에서 월류현상이 발생하였다. 하지만 고지수직구에서는 모든 CASE에서의 공기폭발 현상 및 월류현상이 발생하지 않아 유입성능 및 공기배출 성능이 충분히 발휘되고 있는 것으로 분석되었다. 또한 저지수직구1에서의 월류현상 발생 시점은 5분55초에서 3분42초까지 빨라졌으며 저지수직구2에서의 월류현상 발생 시점은 5분57초에서 4분57초로 빨라졌다. 이는 터널 내 잔류수량이 증가할수록 터널 내 만관시점이 빨라져 발생하며, 저지수직구1,2에서의 압축공기 폭발현상 및 월류 현상은 터널 내에서 발생한 반사파의 영향으로 판단된다. 차후 터널 내 반사파 발생에 대한 연구가 추가적으로 진행되어야 할 것이다.

  • PDF

Significant Liquid Structure of Binary Mixture, $C_6H_6-C_2H_4Cl_2$ (이성분 액체 혼합물의 통계열역학적 연구)

  • Ahn, Woon-Sun;Pak, Hyung-Suk;Chang, Sei-Hun
    • Journal of the Korean Chemical Society
    • /
    • v.9 no.4
    • /
    • pp.215-221
    • /
    • 1965
  • The significant liquid structure theory is extended to binary mixture, benzene-ethylenechloride system. The partition function, applicable throughout the temperature range in which Raoult's law is satisfied is derived. The thermodynamic quantities such as total and partial pressures, molar volumes and mixing entropies are calculated from the partition function at the temperatures $293.15^{\circ},\;323.14^{\circ}\;and\;357.15^{\circ}K.$ The theoretical values, thus calculated, are found to agree with the experimental data in the literatures.

  • PDF

Face Recognition using Contourlet Transform and PCA (Contourlet 변환 몇 PCA에 의한 얼굴인식)

  • Kwon, Seok-Young;Song, Chang-Kyu;Chun, Myung-Geun
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 2007.04a
    • /
    • pp.279-282
    • /
    • 2007
  • 본 논문에서는 컨투어렛과 주성분분석기법을 이용한 융합기법에 의한 얼굴인식 시스템을 제안한다. 제안된 방법은 우선적으로 컨투어렛변환에 의해 얼굴영상을 대역별, 방향성분별로 분해한 후, 주성분분석기법을 이용하여 방향성분별로 분할된 부영상에서 특징벡터를 각각 추출한다. 최종 단계에서는 각각의 대역별로 산출된 매칭도를 효과적으로 융합할 수 있는 융합기법을 이용하여 얼굴인식이 수행된다. 제안된 방법의 유용성을 보이기 위해 ORL 얼굴데이터베이스를 대상으로 실험하여 기존 방법인 PCA나 웨이블렛변환을 이용한 방법에 비해 향상된 결과를 보임을 확인한다.

  • PDF

Electro-Optical Characteristics of an ICP Light Source Depending on Driving Temperature and Length of Discharge Tube (구동 온도와 방전관 길이에 따른 ICP 광원의 전기.광학적 특성)

  • Yim, Youn-Chan;Park, Dae-Hee
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.22 no.4
    • /
    • pp.107-113
    • /
    • 2008
  • We investigated the electro-optical characteristics of an ICP(Inductively Coupled Plasma) light source depending on driving temperature, and length of discharge tube. An electro-optical stability of a sample at operating was measured to see a steady state of a sample. In this results, we can see that a stability of power loss and luminous flux of a sample at operating of upper 70[min] was 1.45[%1 and 0.36[%]. We measured the optical characteristics of a sample in a thermal chamber operated at a specific temperature divided into 5 steps. While luminance increased with temperature increasing, the decrement of luminance a eared at u or $46.7[^{\circ}C]$. According to Parchen's and Boyle-Charles' law, we can speculate that a pressure was increased and a higher voltage was needed but a ballaster having a rating power can't support a higher voltage corresponding to a pressure change, 0.02[Torr] at $46.7[^{\circ}C]$. Moreover, we measured an a lied power and current of samples depending to a various length of a discharge tube.

Studies on the Several Soil Factors Affecting on Alachlor and Paraquat Adsorption by Soils (Alachlor 와 Paraquat 의 토양흡착(土壤吸着)에 관여(關與)하는 토양인자(土壤因子)에 대한 연구(硏究))

  • Lim, Soo-Kil;Bong, Won-Ae
    • Korean Journal of Environmental Agriculture
    • /
    • v.11 no.2
    • /
    • pp.101-108
    • /
    • 1992
  • In order to illustrate adsorption phenomena of herbicides(alachlor and paraquat) on soils, absorption equation of herbicides and the relationships between soil properties and adsorption constants were investigated with 22 soils. The results were as follows : 1. The shaking time for approaching equillibrium reaction of herbicides(alachlor and paraquat) with woils were about 30 minutes for paraquat and 4 hours for alachlor, respectively. 2. The distribution coefficients of alachlor were inbetween 0.81-33.83 in 5 ppm and 0.09-15.52 in 50 ppm, respectively. 3. The adsorption of alachlor was positively correlated with organic matter and paraquat was with clay content of soils. 4. Both paraquat and alachlor were highly adsorbed in Chunpo series soil containing low contents of organic matter and clay on account of different mechanism from other soils, 5. Freundlich's adsorption constant(K) was greater than distribution coefficient(Kd), and the differences between K and Kd's were to be increased with increasing equillibrium concentrations.

  • PDF

Graphic system analysis on the Chil Sung Hwa(seven stars picture) (칠성화(七星畵)의 그래픽체계 분석)

  • 나윤화
    • Archives of design research
    • /
    • v.11
    • /
    • pp.22-29
    • /
    • 1995
  • I have to find standpoint of sight moulding of Chi I Sung Hwa(seven stars picture) analysis of graphic systems of a symbol sight native to our nation. And I will comprehend emotion of folkways by simple and graphic lines and colors in mathematical Grid of which ancestor had expressed in gauge moulding consciousness. This papers aim is to make a contribution to lead by on part of communication design. About structural analysis of pictorial graphic side. I) Mathematical thought of the Orient and space constitution are first basically the Orient expressed number notion of mathematics of unlimitedness and notion of zero so called space and empty second can analigize a diagonal expansion method by development of symmetry notion to basic the dual principle of the negative and positive by degrees development expressed space division method by direction notion. 2) About the proportion analysis it based the golden section globularity and in modern layout it takes vision center of position, after appointing the brow of sacred image of Chil Sung Hwa as center point of proportion and applied to the point proportion and so analigized the posibility of established. Rule in union of each elements and rule of forms about picture image. 3) Mathematical structure analysis to search a unified principle at the balanced arrangement and rule of forms it analigized the standard the rule of forms. it analigized the standard the rule of forms to body module of basic movement of protagonist and follower above basic forms of grid that is the basis of design system.

  • PDF

Measurement of flash point for binary mixtures of Ethanol, 1-propanol, 2-propanol and 2,2,4-trimethylpentane (Ethanol, 1-propanol, 2-propanol 그리고 2,2,4-trimethylpentane 이성분 혼합계에 대한 인화점 측정)

  • Hwang, In Chan;In, Se Jin
    • Clean Technology
    • /
    • v.25 no.2
    • /
    • pp.140-146
    • /
    • 2019
  • Flammable substances, such as organic solvents, are commonly used in laboratories and industrial processes. The flash point of flammable liquid mixtures is a very important parameter for characterizing the ignition and explosion hazards, and the flash points of mixtures of $C_2{\sim}C_3$ alcohols and 2,2,4-trimethylpentane were measured in the present study. The 2,2,4-trimethylpentane is an important component of gasoline and is frequently used in the petroleum industry as a solvent. Lower flash point data were measured for the binary systems {ethanol + 2,2,4-trimethylpentane}, {1-propanol + 2,2,4-trimethylpentane}, and {2-propanol + 2,2,4-trimethylpentane}. The flash point measurements were carried out according to the standard test method (ASTM D3278) using a Stanhope-Seta closed cup flash point tester. The measured flash points were compared with the predicted values calculated using Raoult's law and also following $G^E$ models: Wilson, Non-Random Two Liquid (NRTL) and UNIversal QUAsiChemical (UNIQUAC). These models were able to predict the experimental flash points for different compositions of {$C_2{\sim}C_3$ alcohols + 2,2,4-trimethylpentane} mixtures with minimal deviations. The average absolute deviation between the predicted and measured lower flash point was less than 1.28 K. A minimum flash point behaviour was observed in all of the systems as in the many observed cases for the hydrocarbon and alcohol mixtures.

Distribution Characteristics on the Parameters of Vertical Tidal Current Profile at Uldolmok, Jindo, Korea (진도 울돌목의 조류 연직 프로파일 매개변수 분포 특성)

  • Ko, Dong Hui;Park, Jin Soon;Cho, Hong Yeon;Park, Jun Seok;Lee, Gi Seop;Choi, Hyukjin
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.29 no.6
    • /
    • pp.279-285
    • /
    • 2017
  • In general, the power law and logarithmic profile are commonly used as flow vertical velocity profile model. However, since the parameters of profile vary with characteristics of coastal environment, it is necessary to estimate these values from measured data using regression analysis. In this paper, we estimated the power law exponent (n), friction velocity ($u^*$) and roughness length ($z_0$) of logarithmic profile by analyzing measured tidal current data that are averaged at a interval of 30 min. In the results of analysis, power law exponent (n) was estimated to be about 10.75 during flood and about 9.3 during ebb. Meanwhile, $u^*$ of logarithmic profile was estimated to be about 0.084 m/s, 0.105 m/s during flood and ebb, respectively. Also, $z_0$ was estimated to be 0.004 m and 0.006 m, respectively.

Model Simulation for Assessment of Image Acquisition Errors Affecting Electron Tomography (영상 자료 획득시의 오류가 전자토모그래피 결과에 미치는 영향 고찰-모델 시뮬레이션을 중심으로)

  • Jou, Hyeong-Tae ;Lee, Su-Jeong;Kim, Youn-Joong;Suk, Bong-Chool
    • Applied Microscopy
    • /
    • v.38 no.1
    • /
    • pp.51-61
    • /
    • 2008
  • This simulation study examined the effect of data acquisition error including the data type of TEM image, and incident beam intensity of the tilt series on 3D tomograms. Simulation was performed with the 3D head phantom model of Kak and Slaney, and the slightly modified 3D head phantom model with enhanced difference in absorption coefficients. Reconstructed tomogram for the original head phantom model using 8-bit gray-scale image was distorted with extremely high level of noise, while an acceptable result was obtained for the modified model. The results for the original model using wrong formulation for the transmitted beam intensity was proved to be incorrect. The high level of noise along the z direction was found in case of the modified model. On the other hand, the wrong value of incident beam intensity in both models gave distorted results. In order to reconstruct an artifacts-free 3D structure from the projections with invisible features in electron tomography, the 16-bit projection images should be used with the correct incident beam intensity which is applied to Beer's law.