• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.91-100
• /
• 2006

This paper examines the situation and tasks of UK rail privatization, especially focusing on after the Hatfield rail accident. Earlier research which focused on the UK's Privatization had little knowledge of the explanations for recent changes. Moreover they had difficulty making a direct comparison between national rail and the privatized rail. Therefore we aye left without a good explanation which has a comprehensive perspective. I attempt to show the change in the rail privatization Process and its outcome, focusing on after the Hatfield rail accident. This Paper argues that the UK's vail privatization process has a regulatory framework which is too complicated with overlapping responsibilities that brought about inefficiency, increasing costs and a superficial safety regime. Especially the planning of rail and infrastructure maintenance did not come to play an appropriate role. However after 2000, the government took charge of setting the strategy for railways, and the Office of Rail Regulation covered safety performance and cost. explain that these changes present a good opportunity to solve the problem of passing the buck for poor performance. Through the analysis, I find that the passenger rail network is well-suited to deliver long distance business and commuters and that the subsidy from the government is decreasing. However, performance, for example punctuality and reliability. should be improved. Especially the Hatfield rail accident caused a reduction in the satisfaction of passengers. In future. the problems of rising costs and monopoly franchise system should be addressed.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.365-370
• /
• 2012

In this study, Economic analysis of supercritical coal-fired power plant with $CO_2$ capture process was performed. For this purpose, chemical absorption method using amine solvent, which is commercially available and most suitable for existing thermal power plant, was studied. For the evaluation of the economic analysis of coal-fired power plant with post-combustion $CO_2$ capture process in Korea, energy penalty after $CO_2$ capture was calculated using the power equivalent factor suggested by Bolland et al. And the overnight cost of power plant (or cost of plant construction) and the operation cost reported by the IEA (International Energy Agency) were used. Based on chemical absorption method using a amine solvent and 3.31 GJ/$tonCO_2$ as a regeneration energy in the stripper, the net power efficiency was reduced from 41.0% (without $CO_2$ capture) to 31.6% (with $CO_2$ capture) and the levelized cost of electricity was increased from 45.5 USD/MWh (Reference case, without $CO_2$ capture) to 73.9 USD/MWh (With $CO_2$ capture) and the cost of $CO_2$ avoided was estimated as 41.3 USD/$tonCO_2$.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.137-159
• /
• 2017

This study divides manufacturing in 18 countries including Korea, China, Japan and OECD countries into 11 areas and estimates and compares the technological efficiency of each industry. The traditional view of productivity is to increase production capacity through technological innovation or process innovation, but it is also influenced by the technological efficiency of production process. A Stochastic Frontier Production Model (SFM) is a representative method for estimating the technical efficiency of such production. First, as a result of estimating the production function by setting the output variable as total output or value-added, in both cases, the output increased significantly in all manufacturing sectors as inputs of labor, capital, and intermediate increased. On the other hand, R&D investment has a large impact on output in chemical, electronics, and machinery industries. Next, as a result of estimating the technological efficiency through the production function, when the total output is set as the output variable, the overall average of each sector is 0.8 or more, showing mostly high efficiency. However, when value-added was set, Japan had the highest level in most manufacturing sectors, while other countries were lower than the efficiency of the total output. Comparing the three countries of Korea, China and Japan, Japan showed the highest efficiency in most manufacturing sectors, and Korea was about half or one third of Japan and China was lower than Korea. However, in the food and electronics sectors, China is higher than Korea, indicating that China's production efficiency has greatly improved. As such, Korea is not able to narrow its gap with Japan relatively faster than China's rapid growth. Therefore, various policy supports are needed to promote technology development. In addition, in order to improve manufacturing productivity, it is necessary to shift to an economic structure that can raise technological efficiency as well as technology development.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.378-387
• /
• 2023

Petrochemical is an energy consuming industry that consumes about 30% of total industrial energy consumption and is a representative carbon dioxide (CO₂) emission source. Among them, the Naphtha Cracking Center (NCC), which produces ethylene, propylene, propane and mixed C4, consumes large amounts of energy and emits significant amounts of CO₂. For this reason, an integrated techno economic- environmental impact assessment aimed at reducing energy consumption and environmental impact factors is necessary to ensure efficiency in terms of economics and environment. This study aims to analyze the efficiency of the heat exchanger network used in the existing NCC base on the pinch analysis and select an improvement plan that can reduced energy consumption. In order to reduces the utility consumption in the process, an optimal heat exchanger network considering the high-temperature and low-temperature stream was derived, and the economic evaluation was conducted by considering the trade-off between the reduction in utility consumption and the increase in heat exchanger installation cost. In addition, an environmental impact assessment was conducted on the reduced CO₂ emission in consideration of the environmental aspect, and the economic environmental impact assessment used the payback period to recover the invested funds to come up with an energy saving plan that can be applied based on the actual process. As a result of considering the economic-environmental impact assessment, when the environmental impact assessment was not considered, it was 4.29 months, 3.21 months, and 3.39 months for each case, and when considering the environmental impact assessment, it was 4.24 months, 3.17 months, and 3.35 months for each case. These results appeared equally both when the environmental impact assessment was not include and when it was include. In addition, a sensitivity analysis was conducted for each case to determine how important factors affect the payback period. As a result of the sensitivity analysis, the cost of the heat exchanger was identified as a major factor influencing the overall cost.

• Journal of Teachers' Pension
• /
• v.3
• /
• pp.69-105
• /
• 2018

저출산과 고령화 이슈는 우리사회의 경제적 문제뿐만 아니라 공적연금의 재정지속가능성 여부와도 맞물려 있다. 실제로 우리나라 모든 공적연금은 사회보험역설(social insurance paradox)이 지속되기 힘든 새로운 도전에 직면하였다. 즉, 재정지속가능성은 제도 내적 연금개혁 혹은 제도 외적 재정지원이 없다면 항시적 수지불균형 상태가 누적될 것으로 예측된다. 이에 정부는 직접 고용과 관련된 공무원연금과 군인연금에 대해서만 연금충당부채를 산출하도록 규정하고 있다. 발생주의회계를 채택한 국제회계기준(종업원급여)을 참조하여 연금충당부채 산출을 위한 연금회계준칙(2011.8.3. 제정; 2011.1.1. 시행) 그리고 '연금회계 평가 및 공시 지침(2011.8.3. 고시 : 이하 편의상 연금회계지침이라 함)'을 신설하였다. 사학연금에 적용성 여부 논의에 앞서, 이들의 산출방법상의 문제점을 먼저 살펴보았다. 첫째, 공적연금은 공통적으로 세대 간 합의에 의해 운영되는 사회계약에 해당하므로 제도의 연속성을 전제로 한다. 하지만 연금회계준칙 및 지침은 제도의 청산을 전제로 현재 가입자(연금 미수령자, 연금 수령자)에 대해서 연금충당부채를 산출하는 폐쇄형측정(closed group valuation)을 채택하고 있다. 즉, 폐쇄형은 제도의 연속성 속성을 반영하고 있지 못하고 있어 기본 전제와 모순된다. 둘째, 공무원연금과 군인연금은 이미 기금 소진(최소한의 유동성기금만 보유함)이 되었고 정부의 보전금에 의해 수지 균형이 유지되는 순수부과방식 체계로 전환되었다. 따라서 연금충당부채는 해당 적립기금의 과소 여부를 판정하는 재정상태 기준 값에 해당하므로 기금소진이 진행된 현 상황에서는 산출의 목적, 필요성을 찾기가 힘들다. 부언하면, 제도 외적 재정지원(보전금)에 의한 수지균형방식이라면 발생주의회계보다는 현금주의회계가 회계의 목적적합성이 높다. 마지막으로 연금충당부채 산출에 있어 가장 민감한 할인율 설정 권한을 기재부장관에게 위임한 내용은 산출의 객관성, 일관성을 확보하기 힘들다고 판단된다. 이를 해소하기 위한 방안으로 본 연구에서는 5년마다 실시하고 있는 장기재정계산에서 예측된 명목 기금투자수익률을 연도별로 적용할 것을 권고하고 있다. 현행 정부회계기준을 사학연금제도에 그대로 적용하기에는 상당한 무리가 있다. 그 이유와 공시방안에 대해 살펴본다. 현재 사학연금은 기금소진 이슈로부터 상당부분 벗어나기 위해 2015년 연금개혁을 단행한 바가 있고 이를 통해 상당기간 부분적립방식 체계가 유지될 것이다. 물론 제도 외적 재정지원은 사학연금법 제53조의7에서 정부지원의 가능성만을 열어 놓은 상태이므로 미래기금소진의 가능성은 상존한다고 볼 수 있다. 먼 미래에는 순수부과방식 체계로 전환될 개연성이 높다. 이러한 재정의 양면성을 본 연구에서는 이중재정방식(dual financing system)이라고 한다. 이러한 속성을 고려하여 연금충당부채(연금채무라는 표현이 적합할 것으로 사료됨)를 산출하고 공시하여야 한다. 그 주요 연구 결과는 다음과 같이 요약된다. 먼저 현행 부분적립방식의 재정상태 검증을 위해 연금채무를 산정할 필요성이 있다. 이를 위해 본 연구에서는 기발생주의(예측단위방식 적용)에 근거한 폐쇄형 측정I(제도 종료를 전제로 현 가입자의 잠재연금채무(IPD) 산출에 초점을 둠) 그리고 미래발생주의(가입연령방식 적용)에 근거한 폐쇄형 측정II(추가적으로 현 가입자의 일정기간 급여 및 기여 발생 허용)을 제안하고 있다. 이를 통해 미적립채무의 규모 그리고 이를 해소하기 위한 상각부담률을 산출할 수 있다. 최종적으로 미래 가입자들까지 포함하고 기금소진 가능성까지 고려하는 개방형측정(open group valuation)을 다루고 있다. 단, 본 연구에서는 공무원연금처럼 기금부족분에 대해서 향후 정부보전금이 있다는 가정 하에 공시 방법을 제시하고 있다. 요약하면, 현행 사학연금제도는 현재와 미래의 재정 양면성을 모두 고려하여 연금채무 및 미적립채무를 공시하여야 한다. 부언하면, 현재 부분적립방식 재정상태를 반영하는 연금채무는 발생주의회계를 적용하고 미래에 도래할 순수부과방식 재정상태는 현금주의회계를 적용할 것을 최종 결론으로 도출하고 있다. 마지막으로 본 연구의 한계는 정부보전금의 가능성에 대한 법률적 해석과 병행하여 책임준비금 범위의 안정적 확대를 전제로 한 공시 논의 그리고 보전금의 책임한도 범위에 따른 공시 논의 등은 다루고 있지 않다는 점이다. 이러한 논의 사항은 향후 연구과제로 두고자 한다.