• 한국철도학회논문집
• /
• 제11권2호
• /
• pp.151-157
• /
• 2008

디젤엔진 배기가스 저감 장치의 세라믹 필터 재생 특성을 파악하는데 있어서 중요한 인자인 세라믹 필터 내의 온도 분포를 30군데에서 측정하였다. 세라믹 필터 내의 온도 분포에 적합하도록 제작한 K-형 열전대를 사용하여 측정하였다. 5개로 구성된 분할형 전기히터를 장착하고 중심부 전기히터부터 차례로 돌아가면서 ON/OFF 제어를 하면서 세라믹 필터 내의 온도를 측정하였다. 또한 공기 공급 유량을 변화 시키면서 분할형 전기히터의 ON/OFF 제어가 세라믹 필터 내의 온도 분포 특성에 미치는 영향을 연구하였다. 세라믹 필터 내의 온도가 균일한 분포를 가지려면 배기가스저감 장치 입구에서의 유속 분포가 균일한 경우가 유리하였다. 분할형 히터간의 가열 능력 편차에 의해 세라믹 필터 내의 온도 분포도 큰 영향을 받았다.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.7-14
• /
• 2008

The temperature distribution in a surface of diesel particulate filter(DPF) was measured using an infrared temperature camera. In order to regenerate the DPF, five partitioned electric heaters were used for heating the ceramic filter. The five partitioned heaters were switched on/off with some time interval one the other. The surface temperature distribution in the ceramic filter and electric heaters were measured with varying both the electrical power supply to the heaters and the mass flow rate of the air supply from a blower. The higher mass flow rate in the DPF system enhanced the uniformity in the surface temperature distribution of the ceramic filter due to effective convection heat transfer. The flow in the monolith ceramic structure of the DPF move mainly in the axial direction, which could be identified from the surface temperature of the ceramic filter.

• 한국연소학회지
• /
• 제15권3호
• /
• pp.67-73
• /
• 2010

The temperature distribution of diesel particulate filter with five partitioned electric heaters is numerically analyzed to investigate the condition of regenerating ceramic filter. The commercial code STAR-$CCM+^{(R)}$ is utilized to simulate multi-dimensional steady hot air flow in DPF. In order to verify the computational results, thermocouples are used to measure the temperature distribution in DPF. Computational results agree well with experimental ones. The results show that the maximum temperature in DPF is lowered as the mass flow rate of exhaust gas increases, which means that the more power in heater will be necessary as the engine speed increases. Compared with heater placed at center, heater at circumference has the higher maximum temperature in DPF. The maldistribution of flow field in front of heater has the main influence on the temperature distribution in DPF.