• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.116-116
• /
• 2010

마이크로퀘이사들은 고중력 천체와 보통의 별이 공전하며 서로의 물질도 이동하는 근접 쌍성계로서, 불규칙하고 간헐적으로 플레어와 그에 수반하는 상대론적인 속도로 분출되는 물질을 분출하는 현상, 즉 마이크로퀘이사 현상을 보인다. 두 천체사이의 거리는 수백만 킬로미터이고, 특히 물질을 분출하는 것으로 믿어지는 고중력 천체 주변의 크기는 수천 킬로미터 정도인데 반하여, 우리로 부터의 거리는 보통 10 킬로 kpc 이상이다. 따라서 마이크로퀘이사 현상의 영상을 얻으려면 초장기선 전파간섭계를 이용해야 한다. 우리는 일본의 초장기선 전파간섭계 VERA를 이용하여 VERA J2032+4057의 플레어 상태에서의 물질 분출 현상을 영상화 하였다. VERA J2032+4057의 플레어와 불질분출은 매우 복잡하여 여러 가지 모델들을 써서 영상을 해석해 보았다.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.61-71
• /
• 1988

본 논문에서는 Laser Rayleigh Pyrometer에 의한 광학계의 개조와 측정기술을 발전시켜 지금까지의 측정이 불가능한 밀폐용기내에서 분출화염의 온도측정을 시도하여 분출화염에 의한 착화나 소염의 연구에 중요한 자료를 얻고자 하는데 있다. 밀폐용기내에서의 온도측정은 대기개방형에서와 같이 Laser의 에너지를 증대시키기 위해 이용한는 다중반사 Mirror가 사용될 수 없을 뿐만 아니라 약한 Rayleigh산란빛에 의하여 입사창이란 Laser Trap으로 발생하는 강한 배경광 및 분출화염 뿐만 아니고 착화된 화염에서 대량의 화학발광은 피할 수 없다. 본 논문은 이와 같은 영향을 제거하는데 노력하여 밀폐용기내의 연소장에서 온도를 측정하였으며 또 측정가능성을 시사하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.55-59
• /
• 1999

The Rapid Expansion of Supercritical fluid Solutions (RESS) process was applied to particles coating. Microcapsules prepared by spray drying were used as the core particles, and two kinds of paraffin were used as the coating materials. Supercritical $CO_{2}$ solutions of paraffin were expanded through the short nozzle into the bed that was fluidized by air. Extraction temperature and pressure were varied at $50~120^{\circ}C$, $150~200\;kg/\textrm{cm}^2$, respectively. The thickness of theoritical coating layer ws measured, and precipitate coating layer on surface was analyzed by using SEM, FT-IR. The release behaviors of $Mg^{2+}$ ions were inspected by atomic absorbance spectrophtometer.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.224-227
• /
• 2011

In order to determine the enthalpy profile in the high temperature transpiration cooling test facility for the air-breating engine compartments, theoretical calculation and measurement for the flow of the test section are performed. The mass averaged enthalpy value determined by the heat balance and sonic throat methods is 10 MJ/kg. The centerline enthalpy value measured using the slug type copper calorimeter is 15 MJ/kg. Typically, the ratio of centerline and mass averaged enthalpy should be varies from 1.4 to 4. This facility has lower bound of enthalpy profile. It will be effective in testing of high temperature transpiration cooling.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.33-36
• /
• 2008

For the past 300 Ma, massive extinctions are associated with major flood basalt eruptions. The geomagnetic Superchrons (Cretaceous Normal Superchron, Kiaman Long Reversed Superchron, Moyero Long Reversed Superchron) precede the major flood basalt eruptions and massive extinctions. It is likely that upswing of mantle plumes is responsible for the generation of continental flood basalt. Eruption of flood basalts results in a catastrophic climate change as well as a massive genus depletion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.673-676
• /
• 1998

The Rapid Expansion of Supercritical fluid Solutions (RESS) process was applied to particles coating. Experiments were conducted in a fluidized bed with an internal nozzle in the center of the reaction tube. Pure glass beads (500~590$\mu$m, 74~149$\mu$m) and glass beads covered with brilliant blue were used as the core particles. Supercritical $CO_2$ solutions of paraffin were expanded through the nozzle into the bed that was fluidized by air. The precipitate coating materials on core surface was analyzed by using SEM, FT-IR. The releasing behavior of brilliant blue was inspected by atomic absorbance spectrophotometer. The release behavior of coated particles superior to noncoated particles.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.591-595
• /
• 1997

In analysis of piping vibration of petrochemical plant, the forcing functions mainly depend upon the equipment working mechanism and vibration resources in the piping systems. In general, harmonic function is used for the system with rotary equipments. Mechanical driving frequencies, wave functions, and response spectrum are used for reciprocating compressors, surge vibration of long transfer piping, and seismic/wind vibration, respectively. In this study, for the spray injection case inside the pipe, forcing function was modeled, in which two different fluids are distributed uniformly. To confirm the results, the scheme used for the forcing function was applied for real piping system. The vibration mode of the real system was consistent with the 4th mode obtained by simulation using the forcing function formulated in this study.

• Journal of the Korea Society for Simulation
• /
• v.10 no.4
• /
• pp.1-10
• /
• 2001

For the simulation of piping vibrations in petrochemical plants, forcing functions mainly depend upon the equipment working mechanism and vibration resources in the piping systems. In general, harmonic function is used to simulate rotary equipment. Mechanical driving frequencies, wave functions, and response spectrum are used to simulate reciprocating compressors, surge vibration of long transfer piping, and seismic/wind vibration, respectively. In this study, the general suggestions for forcing functions were reviewed and proposed the forcing function to simulate the spray injection system inside the pipe in which two different fluids are distributed uniformly. To confirm the results, the scheme was applied for a real piping system. The vibration mode of the real system was consistent with the 4th mode (26.725 Hz) obtained by simulation using the forcing function presented in this study.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.265-275
• /
• 2017

The aim of this study was to examine fluid excretions and changes in deceased bodies depending on type, location of, and causes of death for hygienic management of funeral homes. Based on the 858 cadavers studied, the average age at the time of death is 68.6 years, 83.0% had illness as the cause of death, and 79.5% passed away in a medical facility. Fluid excretion was observed in 46.2% of the cadavers. In manner of death, 78.8% of deaths -highest percentage- was due to an accident and 10.8% of deaths - lowest percentage- was due to age. Fluid excretion was observed in 46.3% of cadavers from medical facilities, 38.6% of cadavers from homes and 77.4% of cadavers from miscellaneous locations. There were various number of cadavers with recorded immediate, secondary and underlying cause of death; however, the fluid excretion rate was similar. In analyzing the immediate, secondary and underlying cause of death, respiratory and heart disease were the most common causes of death in categories of body organ and system. In terms of fluid excretion, liver disease followed by digestive and circulatory diseases were most common in immediate cause of death. Accidents and miscellaneous circumstances were most common amongst secondary and underlying causes of death for cadavers with fluid excretion. Based on the recorded illnesses of the cadavers, cardiopulmonary failure was most common as evident in 96 cadavers followed by pneumonia and sepsis. Cholangiocarcinoma (73.3%) had the highest rate of fluid excretion followed by pancreatic cancer, severe brain injury and liver cancer amongst categories of illnesses with more than 15 cadavers.

• Journal of the Korean Geographical Society
• /
• v.39 no.6 s.105
• /
• pp.833-844
• /
• 2004

In Chugaryeong rift valley, lava plateau formation by the fissure eruption had vanished original landforms and effected on drainage derangement and revision. 4 rivers including Namdae-cheon, Bukhan-gang, Imjin-gang and Hantan-gang watersheds have shared Cheolwon-Pyeonggang lava plateau, that is, ownerless watershed. Main agency of the dividing process are central-eruption volcanic peaks such as Orisan(453m) and 680 Peak. Especially, Orisan has played the role of divide point for 4 watersheds. In the lower-relief plateau zone, complex drainage system have caused continually river capture between neighboring watersheds. In more elevated range slope, river capture have proceeded to headward erosion. Hydrogeomorphologically, lava-filled valley has initiated decrease of the original size of flood plain, maybe, causing higher capability of inundation by heavy rains, and then more active dissection of lava plateau layer.