• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.197-200
• /
• 2004

Sensor and optical properties have become critical features in powder foundation. The flaky barium sulfate powder shows good smooth texture, adhesion and natural looking characteristics. However, it has limitations abilities in UV shielding, hiding and blooming effect. Thus we adopt TiO$_2$ that has excellent hiding power and blooming effect as well as UV shielding ability, but TiO$_2$ has still intrinsic problems in dispersion and texture. To overcome this disadvantages, the barium sulfate/TiO$_2$/dimethicone composite powder was prepared. The flaky barium sulfate powder was coated with TiO$_2$ in nanoscale and followed by coated with dimethicone. When this surface-modified powder was applied for make-up cosmetics, especially in powder foundation, the powder gave powder foundation more good characteristics than the original flaky barium sulfate, Ti02 powder, dimethicone in abovementioned optical and sensory properties. To characterize the distinctive features of this surface-modified powder, we measured its characteristics with UV in vitro tester, hiding powder test method, goniophotometer, consumer panel test and so on.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.372-380
• /
• 2016

The present paper reports the effect of precursor alumina particle size on pore structure and single gas permeation properties of tubular ${\alpha}$-alumina supports, prepared by a combined process of slip casting and sintering. Pore diameter of as-prepared ${\alpha}$-alumina support was highly dependent on precursor ${\alpha}$-alumina particle size. Although, increase in the precursor particle size increases the pore diameter, but the porosity of ${\alpha}$-alumina support mainly control by sintering temperature. Sintering studies reveal that as sintering temperature increased porosity of support decreased. Single gas permeance results indicate that permence is proportional to the square of pore diameter and linearly to porosity. These dependencies revealed that gas permeation trough as-prepared ${\alpha}$-alumina support was governed by viscous flow mechanism. The present announces that precursor ${\alpha}$-alumina particle size and sintering temperature are key parameters to control gas permeantion properties of ${\alpha}$-alumina supports.

• 수도
• /
• s.38
• /
• pp.25-31
• /
• 1987

• Mineral and Industry
• /
• v.13 no.2
• /
• pp.26-39
• /
• 2000

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.592-599
• /
• 2000

The fine particles of binary ceramic composite of titania-partially-stabilized zirconia(TPSZ) were synthesized by ultrasonic spray pyrolysis at the various temperatures, compositions and concentrations and the effects of process factors for synthesis on the characteristics of fine particles were discussed. The starting salt solutions were prepared to have the ionic concentrations of 0.025~0.1 M aqueous solutions. The fine particles were prepared to have the compositions of 90~97.5 wt% of $ZrO_2$ and 2.5~10 wt% of $TiO_2$. The temperatures for particle synthesis were regulated to be 400~550$^{\circ}C$ as a drying zone, 800~1100$^{\circ}C$ as a pyrolysis zone. The produced fine particles were collected by a wet process and analyzed to investigate characteristic properties after being dried. The compositions of ceramic fine particles were determined by Inductively Coupled Plasma-Atomic Emission Spectroscopy(ICP-AES) technique and phases, morphologies and particle sizes of those were investigated by Raman Spectroscopy, X-ray diffraction(XRD), Scanning Electron Microscopy(SEM), Transmission Electron Microscopy(TEM) and Particle Size Analyzer(PSA) techniques.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.71-81
• /
• 2007

The marble-type dolomite from the Jasung Mine, which was farmed by duplicated affects of contact metamorphism and subsequent hydrothermal alteration, corresponds to a high-purity dolomite ranging up to above 98wt.% in dolomite contents. The dolomite contain minor impurities such as quartz, muscovite, and pyrite. It is characteristic that the dolomite is fairy Fe-rich corresponding to 0.4 wt.% due to the presence of pyrite of possible hydrothermal origin. The dolomite is nearly white-colored and constituting with subhedral crystals ranging $0.35{\sim}0.46mm$M in size, forming equigranular texture. Compared to the typical high-Ca limestone from the Pungchon Formation, the powder characteristics of dolomite is rather superior in milling efficiency, yields of fine particles, and size distribution. In addition, except for iron contents, the dolomite powder is no less superior than the limestone in quality and characteristics as fillers with respects to not only whiteness, oil absorption, and specific surface area but also shape characters such as elongation ratio, aspect ratio, and sphericity. This good characteristics of dolomite powder seem to be originated basically from comparatively higher grade and crystallinity of dolomite. Higher iron contents and the presence of sulfides prevents the dolomite from application for uses by thermal treatment, except for metallic manufacture. However, if proper ore separation procedure is available, the dolomite can be sufficiently utilized as substitutes for high-Ca limestone in most fields of filler industries.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.413-416
• /
• 2011

대용량 기기의 효율적인 전력 공급을 위해 부스닥트의 수요가 급증하고 있으며, 특히 컴팩트형 부스닥트는 케이블에 비해 무게와 부피가 가볍고 전력 효율도 25% 이상 우수하며, 기술의 핵심은 에폭시분체도료의 절연 특성 향상과 제작공정의 최적화와 안정화이다. 따라서 본 연구에서는 유동침적방식(Fluidized Bed Process)에 대한 최적화와 에폭시 분체도료의 절연설계 및 열화특성에 대해 실험 검토 하였다. 또한 전기화재의 주된 원인인 아크방전특성과 절연파괴 특성에 대한 분석과 더불어 다양한 상용제품들의 특성을 비교하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.214-214
• /
• 2003

제지산업에 경쟁력을 부여할 수 있는 방법의 일환으로 제지용 도공안료의 표면개질을 시도하였다 은(Ag)이 항균력이 있다는 것이 여러 사람에 의해 증명된바 있으므로 이 은의 항균력을 제지용 무기안료에 이산화티탄과 함께 표면개질하고 다기능성 복합 항균분체를 설계하였다. 표면개질장치에 설치한 기상분사장치를 통해 은 용액을 고압기상분사로 TiO$_2$입자 표면에 Coating 하였다 이때의 분무각도는 60$^{\circ}$이고 오리피스 직경은 0.6mm, 분사 압력은 14kgf/$\textrm{cm}^2$ 이다. TiO$_2$에 은 용액을 기상분사하여 코팅시킨 후 표면개질 계산식에 의한 배합비로 모입자(clay, CaCO$_3$, PE)와 자입자(TiO$_2$)를 혼합하였고, 분체의 대전현상을 이용하여 모입자 주위에 자입자를 부착시킨 후, 고속기류중 충격력으로 표면개질처리를 하였다 표면개질 장치를 사용하여 제지용 무기안료 표면에 은용액이 코팅된 TiO$_2$를 개질 시켰다. 각종 물성(항균성, 백색도, 산란도)과 XRD, SEM 측정을 통해 기능성 항균분체의 실용방안 가능성에 대하여 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.266-266
• /
• 2007

전자재료 산업에서 전극재료용으로 많이 사용되어지는 은 분말은 주로 액상환원법을 이용하여 만들어지고 있으며, 그 적용 분야에 따라 요구되는 분체 특성(모양, 크기, 밀도, 비표면적 등)은 매우 다양하다. 각각의 특성에 부합되는 은 분말은 주로 제조공정 및 공정변수(농도, pH, 교반방법, 반응첨가제 등)등의 인자에 영향을 받으며, 이런 변수들의 조절을 통하여 합성이 가능하다. 본 실험에서는 다양한 변수들에 따라 제조된 은 분말의 분체 특성을 확인하고, 대표적 전극재료 분야에 적용하여 그 특성을 평가하고자 한다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.327-332
• /
• 2000

현대에 들어와 석유화학, 제약, 플라스틱 공업 등의 발달에 의해 분진의 기능이 활성화되었다. 그에 따라, 분진의 정전기 대전 현상으로 장·재해도 증가하고 있는 추세에 있다 공기 압력을 이용한 분체 도장의 경우는 물론이고, 일정구간으로 분진을 이송, 저장할 경우, 분진 입자는 배관 또는 입자 상호간 마찰, 충돌 등으로 전하의 이동 현상을 일으켜 대전된다［1］. 게다가, 단면적이 작은 개구부, 배관의 균열 등에 의해 일시적으로 외부로 분출되어질 때 대전량은 급상승하게 된다［2］.(중략)