• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.16-16
• /
• 1998

로켓의 추진제에는 고체 추진제와 액체 추진제를 사용하는 두 경우로 나눌 수 있는데, 액체 추진제를 사용하는 경우, 액체 연료와 액체 산화제를 다양한 방법으로 연소실내로 분사하게 된다. 이때 사용되는 injector들 중에 impingement type이 있다. 이 type은 injector의 가공이 비교적 용이하고, 혼합성능이 좋기 때문에 LOX/RP-1(Kerosin-based hydrocarbon fuel)을 사용하는 액체 로켓엔진에서 주로 사용되어 왔다. 두 액체 jet의 충돌에 의해 액막이 형성되는데, 이 액막은 가장자리로 갈수록 두께가 얇아지며 액막표면의 파는 충돌점으로부터 멀어질수록 그 진폭의 증가를 이루어 액체의 표면장력과 관성력의 균형을 깨트리며, 이 순간 액막은 rim의 형태로 분열하여 결국에는 액적을 생성하게 된다. 현재까지의 연구내용은 충돌 jet의 형태 laminar jet과 turbulent jet으로 구분된 인젝트에 관해 연구되어왔고, 특히 국내에는 이러한 구분된 충돌 jet의 분열현상에 관한 연구결과가 미흡하다. 동일한 오르피스의 경우에도 laminar jet과 turbulent jet으로 구분되어 지며, 각각의 jet의 형태에 따라 생성되는 액막의 형상 또는 다르게 생성되어 진다. 그러므로 본 연구에서는 두 구분된 jet의 경우의 분열현상을 실험적으로 분석하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.447-454
• /
• 2017

A three-dimensional two-phase large eddy simulation(LES) has been conducted to investigate the breakup and atomization of liquid jets such as a diesel jet in parallel flow and water jet in cross flow. Gas-liquid two-phase flow was solved by a combined model of Eulerian for gas flow and Lagrangian for a liquid jet. Two stochastic breakup models were implemented to simulate the liquid column and droplet breakup process. The penetration depth and SMD(Sauter Mean Diameter) were analyzed, which was comparable with the experimental data.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.12a
• /
• pp.76-81
• /
• 1998

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.6
• /
• pp.339-343
• /
• 1995

This study was performed to investigate the effect of iron ion on the mesophyll protoplast culture of Arabidopsis thaliana. Mesophyll protoplasts were isolated and cultured in a modified IMH medium supplemented with various concentrations of Fe-EDTA. Relatively low concentration of Fe-EDTA (<0.02 mM) induced the low level (4.8%) of cell division. In addition the cell division and microcallus growth were dose-dependently stimulated by 0 to 1 mM of Fe-EDTA. In 0.5 to 1 mM concentration range of Fe-EDTA, microcolonies were readily formed and the plating deficiency (8.5%) also showed maximal rate. However more than 1 mM of Fe-EDTA inhibited the initial growth of protoplase. The overall results suggest that Fe2+ion concentration plays an important role at the early developmental stage of protoplast regeneration.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.41.1-41.1
• /
• 2011

소행성 또는 혜성으로 인한 충돌의 위험은 최근에 중요하게 다뤄지는 문제이다. 이러한 현상은 실험실에서의, 또는 우주선을 이용한 충돌 실험으로 연구되고 있다. 하지만, 태양계에서 자연적으로 일어나는 천체들 간의 충돌 현상에 대해서는 거의 밝혀진 바가 없다. 분열이 일어난지 11개월이 지나서야 지난해 1월 발견된 소행성 P/2010 A2의 분열 원인을 충돌로 추측하고 있을 뿐이다. 본 발표에서는 지난 12월에 새로 발견된 메인 벨트 혜성(main-belt comet)에 대한 관측 및 연구 결과를 제시하고자 한다. 우리는 관측에서 얻어진 이미지들을 제트(cometary jets)와 임팩트 콘(impact cone)을 고려한 동역학적 모델과 비교하였으며, 이를 통해 혜성 활동의 원인을 분석하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.1-9
• /
• 2010

LES(Large eddy simulation) of breakup and droplet atomization of a liquid jet into cross turbulent flow was performed. Two phase flow of gas and liquid phases were modeled by the mixed numerical scheme of both Eulerian and Lagrangian methods for gas and liquid droplet respectively. The breakup process of a liquid column and droplets was observed by implementing the blob-KH wave breakup model. The penetration depth into cross flow was comparable with experimental data for several variants of the liquid-gas momentum flux ratio by varying liquid injection velocity. SMD(Sauter Mean Diameter) distribution downstream of jet was analyzed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.28-39
• /
• 2003

Effects of the orifice internal flow such as cavitation and hydraulic flip on transverse injection into subsonic crossflows have been studied. The liquid column breakup length and the liquid column trajectory were measured by changing the orifice diameter (d), the orifice length/orifice diameter (L/d), the injection pressure and the shapes (sharp and round) of orifice entrance, and were compared with previous results. It is found that cavitation bubbles, which occur inside the sharp-edged orifice, make the liquid jet very turbulent and especially in the orifices with L/d ＝ 5 hydraulic flip appear as cavitation bubbles are emitted from the orifice. The breakup length is shorter as cavitation bubbles grows and hydraulic flip appears. However, the liquid column trajectories normalized by the effective diameter and the effective momentum ratio have a similar tendency irrespective of cavitation and hydraulic flip.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.149-156
• /
• 1999

In order to investigate the effect of low temperature pretreatment on pollen dimorphism and embryo formation in anther culture of Platycodon grandiflorum, the anthers with microspore at the uninucleate stage were cultured on Murashige and Skoog medium supplemented with 0.5mg/L NAA and 1.0 mg/L BA. The low temperature pretreatment have clear effect on the frequencies of S pollen grains, symmetrical binucleate microspores (B type of S pollen), multinucleate and multicelled pollen grains. Especially, after low temperature pretreatment at 8$^{\circ}C$ for 5 days increased the frequency of S pollen grain (20.6%) in vivo. In addition, the highest frequency of callus induction (54.9%) and embryo formation (9.9%) were obtained from the anther pretreatment at 8$^{\circ}C$ or 5 days. Three distinct pathways could be recognized in the androgenesis, one involving mainly the vegetative cell, the second starting with the vegetative and the generative cell, respectively, and the third accompaning with two equal vegetative type cells in the pollen grains.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.72-75
• /
• 2003

In this research, we focused on the effects of the orifice internal flow such as cavitation and hydraulic flip. The breakup characteristics such as the breakup length and trajectory were measured by changing the orifice diameter (d), the orifice length/orifice diameter (L/d), the injection pressure and the shapes (sharp and round) of orifice entrance to provide a lot of conditions of the orifice internal flow. It is found that cavitation bubbles that occur inside the sharp-edged orifice make the liquid jet ejecting from the orifice turbulent. In the orifices (L/d = 5), the hydraulic flip phenomenon is shown when the injection pressure is high. In case cavitation occurs it breaks up more earlier than that in case of non-cavitation. In case hydraulic flip occurs, since the area of the liquid jet becomes small, the breakup length is also small as that in case of cavitation. But the liquid column trajectories have a similar tendency irrespective of cavitation.

• Korean Journal of Social Welfare
• /
• v.30
• /
• pp.199-226
• /
• 1996