• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.529-536
• /
• 2020

Reaction Control System of the third stage of the Korean Space Launch Vehicle II conducts roll control and 3 axis control throughout third stage engine start, satellite separation, and collision and contamination avoidance maneuver. Reaction control system consumes its propellant in each thruster operation. Hence, loading of proper amount of the propellant is important for mission success. It is needed to have a rough estimation method of propellant consumption during the flight. In this paper, we developed a energy equation using pressure and temperature data which are acquired in the on-board reaction control system. We constructed a test system which is similar with the on-board reaction control system to verify the energy equation. Test results using deionized water were compared with estimated propellant consumption. We also conducted an error analysis of the energy equation. We also presented the propellant consumption result of a system level operation test.

• Journal of the Korean Society for information Management
• /
• v.25 no.2
• /
• pp.127-141
• /
• 2008

In this study, we investigated the information users' needs and information seeking behavior in the field of science and technology. We found that the science and technology researchers most frequently needed information while conducting the research & development related tasks and drafting research papers. The researchers attributed the main sources of research ideas to be the communication among colleagues and the literature review. The researchers's most preferred information sources were digital libraries, web search engines, and academic information portal. In conclusion, the science and technology researchers regarded the online use of electronic materials as the primary source of information. We hope that this investigation reported herein to be the foundation for developing user-centered information services for the science and technology discipline.

• Journal of Intelligence and Information Systems
• /
• v.3 no.1
• /
• pp.143-160
• /
• 1997

현재 우리 군에서는 첨단과학무기를 이용한 전투력을 신속히 집중, 전환시키고 효과적으로 통합 운용해야하는 각급 제대의 지휘관 및 참모의 지휘통제능력 향상을 위하여 첨단 컴퓨터장비를 이용하여 시뮬레이션 기법을 통한 워게임 모델을 개발하여 이를 이용한 훈련을 실시하고 있다. 이 워게임 모델중 지상전투의 가장 기본이 되는 근접전투 시뮬레이션은 미국에서 개발도입된 "COBRA" 시스템을 이용하고 있으나 한국실정에 맞는 시스템으로 확장 및 유지보수가 어렵고, 상위시스템의 서브시스템으로만 운영되고있어 자체 교육훈련 및 전투분석을 위한 단독시스템으로 운영이 어려운 실정이다. 본 논문에서는 이러한 문제점을 극복하고, 방대한 양의 지식을 효율적이고 효과적으로 표현할 수 있으며 시스템의 확장 및 유지보수가 용이하고 우리실정에 적합한 전투 훈련을 실시하도록 지원하는 워게임(근접전투) 지원용 멀티미디어 전문가시스템을 개발하였다. 본 논문에서 개발한 전문가시스템은 쌍방이 부대들의 근접전투를 실시할 때 실전에서 나타날 수 있는 가능한 모든 상황의 데이터를 이용하여 전투상황을 분석하며, 기존의 획일적이고 단순한 형태로 결과를 판정하던 것을 전투원의 사기, 체력, 전투한계 등 심리적 요소까지 고려함으로써 새로이 변화되는 전쟁양상에 쉽게 적응할 수 있는 확장성 및 유지보수가 용이하며 시스템 단독으로 운영하여 반복적으로 전투를 분석하고 교육훈련을 실시하도록 함으로써 실전적이고 실질적인 근접전투 워게임지원이 가능하다. 본 논문에서는 전문가 시스템을 개발함에 있어서 지식베이스 모듈, 추론엔진 모듈 및 설명 모듈은 전문가 시스템 개발도구인 Smart Elements를 이용하여 구축하였으며, 사용자 인터페이스 모듈은 멀티미디어 저적도구인 툴북 3.0을 이용하였으며, 마지막으로 전체적인 모듈은 API를 이용 통합하여 하나의 응용소프트웨어를 생성하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.404-407
• /
• 2018

- A car is a means of transporting passengers or cargo on the ground by transmitting power from the engine to the wheels. In the past, automobiles started from internal combustion engines have recently been introduced with hybrid electric vehicles and pure electric vehicles. As a result, the deployment of high-tech electrical and electronic products is inevitably increased due to the development of technology and stability of various parts, resulting in a more complicated and diversified electromagnetic environment. CISPR 25 is conducting research on the test method for electromagnetic noise. In order to analyze the noise pattern according to the GND condition required in the radiation emission test, various conditions are applied for comparison. 2 Page - General characteristics of EMI chambers, techniques for testing and measuring equipmen 3 Page - RE test : Analysis of Noise due to Ground Strap Change when Sample is in Center, Analysis of Noise due to Ground Strap Changes when the Sample is not in the Center.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1123-1129
• /
• 2003

The noise of maneuvering submarines or vessels can be divided into the tonal signals and broadband ambient noise. Tonal signals are from the revolution of motors and engines of vessels, and broadband ambient noise is from the bubbles which are generated by the propellers and the flow of water around vessels. We can analyze the kinds and the speed of vessels if we analyze the tonal signals and ambient noise. But, it is difficult to divide the tonal signals form the ambient noise when the power of tonal signal is much weaker than the power of ambient noise. In this paper, we detect the direction of arrival(DOA) of the noises generated by vessels with the automatic tracking window(ATW) preprocessing algorithm, and make a beam to the direction of the targets. We suggest a method which can separate weak tonal signals from broadband ambient noise with the ATW algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.301-306
• /
• 2016

During the initial stage of propulsion shaft design, the shaft alignment process includes a thorough consideration of lateral vibration to verify the operational safety of the shaft. However, a theoretical method for analyzing forced lateral vibrations has not been clearly established. The methods currently used in classification societies and international standards can only ensure a sufficient margin to avoid the blade-passing frequency resonance speed outside the range of ${\pm}20%$ of the maximum continuous rating (MCR) for the engine. Typically, in shaft alignment analyses, longer center distances between the support bearings promote affirmative results, but the blade order resonance speed can approach the lower limit for lateral vibration. Therefore, this matter requires careful attention by engineers, and a verification of the theoretical analysis by experimental measurements is highly desirable. In this study, both theoretical and experimental analyses were conducted using strain gauges under two draught conditions of vessels used as 50,000-DWT oil/chemical tankers, introduced recently as eco-friendly ships. Based on the analyses, the influence of the lateral vibration on the shafting system and the system's reliability was reviewed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.759-765
• /
• 2012

This study investigates the effect of diesel combustion strategies on exhaust emissions and hydrocarbon species emissions for a 1.7 L common rail direct injection diesel engine at 1500 rpm and 3.9 bar BMEP. The first strategy is a method to adopt no EGR with a split injection composed of pilot and main injection (split injection). The second is to adopt a moderate EGR rate with main injection only (single-1). The third is to use a high level of EGR and main injection with rail pressure increase, $i.e.$ low-temperature diesel combustion (single-2). Split injection and single-1 showed a renowned phenomenon of a PM-NOx trade-off, whereas single-2 was observed of a PM-NOx trade-off to reduce PM and NOx simultaneously. HC speciation results show that the split injection produced the least amount of HC species, regardless of the carbon number bin, followed by single-1 and single-2. The ratios of methane, acetylene, and CO to THC increased as a combustion A/F ratio is richer due to reduced oxygen content in the vicinity of the combustion zone, thus enhancing pyrolysis.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.456-461
• /
• 2018

Until the 4th Industrial Revolution fused the Web with diverse technologies, the only factor in evaluating the performance of a Web application was the loading speed of the Web application. Therefore, most existing Web application performance analysis tools focus on the speed at which Web applications run in a Web browser. However, the web is now being used not only in a simple web browser but also in a variety of services. So, in addition to simple speed, there are more elements to be checked to evaluate web applications. Therefore, in this paper, we design a server to perform web application performance analysis considering progressive web app, accessibility, best practice, and search engine optimization as well as the above mentioned speed. Also, we realize a REST API based server that can provide web application performance services without being affected by user's devices or environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.779-787
• /
• 2013

The effects of various nozzle configurations on infrared signature are investigated for the purpose of analysing the infrared signature level of aircraft propulsion system. A virtual subsonic aircraft is selected and then a circular convergent nozzle, which meets the mission requirements, is designed. Convergent nozzles of different configurations are designed with different geometric profiles. Using a compressible Navier-Stokes-Fourier CFD code, an analysis of thermal flow field and nozzle surface temperature distribution is conducted. From the information of plume flow field and nozzle surface temperature distribution, IR signature of plume and nozzle surface is calculated through the narrow-band model and the RadThermIR code. Finally, qualitative information for IR signature reduction is obtained through the analysis of the effects of various nozzle configurations on IR signature.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.143-152
• /
• 2003

XML and Web Services draw a lot of attention as standard technologies for data exchange and integration among heterogeneous platforms XML/A, which supports such technologies, is a SOAP based XML APl that facilitates data exchange between a client application and a data analysis engine through the Internet. The fact that the XML format is used for data exchange makes XML/A to be platform-independent. However. client application developers have to go through a tedious Job of treating the same type of XML documents fur downloading data from the server. Also, an XML query language is needed for extracting data from the XML documents sent by the server. In this paper, we present a high level client OLAP API, called DXML, for the client application developers in the windows environment to easily use the OLAP services of XML/A. XMLMD consists of properties and methods needed for OLAP application development. XMLMD is to XML/A what ADOMD is to OLEDB for OLAP. We also present a web OLAP cube browser that is developed using XMLMD. The browser display's data in various formats such as XML, HTML, Excel, and graph.