• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.240-244
• /
• 1999

Monolithic SiC and SiC/C functionally gradient material (FGM) layers were deposited on graphite substrates by CVD method. Temperature a profiles and thermal stress distributions in the deposited layers under the thermal shock were calculated by a commercially available software package. The designed FGM specimens were found to show an efficient relaxation of thermal stresses at the interfaces, and the specimens were intact even under a thermal shock of $\Delta$T=1600 K.

• Journal of the KSME
• /
• v.30 no.3
• /
• pp.246-251
• /
• 1990

마이크로폴라 탄성이론은 다른 마이크로연속체(microcontinuum) 이론에 비해 적용이 간단하며, 실제 많은 물리적인 현상을 규명하는 데 다양하게 이용할 수 있다. 특히 고전 탄성이론에 의해 적절하게 해결될 수 없는 덤벨(dumbell) 분자로 이루어진 물체, 액체 결정체(liquid crystals), 과립상(granular)의 분자로 구성된 물체와 복합 섬유재료(composite fibrous materials) 등은 마 이크로폴라 탄성이론에 의해 잘 해결될 수 있다. 또한 마이크로폴라 탄성이론은 고체 내에서의 파의 전파(propagation)와 분산(dispersion), 구멍 주위의 응력집중과 외부 하중을 받는 물체에 있어 균열끝에서의 응력 분포 등의 고체역학 문제들은 물론이고, 경계층(boundary layer), 난 류(turbulence), 유체 유동의 불안정(instability)과 표면장력 현상 등의 유체역학에서의 복잡한 문제들을 해결하는 데에도 이용할 수 있다. 마이크로폴라 탄성이론은 고전 탄성이론에 비해 상 대적으로 새롭고 미개척 분야이긴 하지만 이론의 기반이 확고하기 때문에 앞으로의 회전응력 측정장치의 개발을 통해 미소구조의 영향을 고려해야 하는 많은 문제들을 해결하는데 큰 기여를 할 것으로 전망된다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.253-267
• /
• 2008

The purpose of this study was to evaluate the pattern and the magnitude of stress distribution in the supporting tissues surrounding implant fixture with different diameter of implant fixtures(3i implant, Ø4.0, Ø5.0, Ø6.0mm and UCLA abutments(Ø4.1, Ø5.0, Ø6.0mm using photoelastic stress analysis. Photoelastic model was made with PL-2 resin(Measurements Group, Raleigh, USA) and three implants of each diameter were placed in the mandibular posterior edentulous area distal to the canine. Individual crowns were fabricated using UCLA abutments. Photoelastic stress analysis was carried out to measure the fringe order around the implant supporting structure under simulated loading conditions(15 lb, 30 lb). The results were as follows; 1. The more the diameter of implant fixture was increased, the less the stress concentration on cervical area of fixture was observed under loading. 2. Increasing mesiodistal diameter of implant superstructure had no much influence on stress distribution around implant fixture. 3. The use of smaller abutment had no influence on stress distribution around implant fixture. The use of smaller abutment diameter than that of implant fixture had no favorable effect on implant supporting tissue at biomechanical consideration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.445-451
• /
• 2006

This study was conducted to develop the interlayer mixture that absorbs the stress between the old concrete pavement and the asphalt overlay pavement layer. The elasticity, the flexibility, the consistency and the impermeability is required for high-elastic Stress Absorbing Interlayer(HSAI) to absorb and disperse the stress that causes the flexural and horizontal movements of the joint and the crack. The HSAI developed from foreign product was satisfied with the design criteria. The specimens using the HSAI showed the significant reduction of the reflective crack compared those not using the HSAI. The significance included that the life of shear failure and horizontal displacement resistance increased 4 times. The life of the share failure increased to 5 times and the horizontal displacement increased to 9 times according to the selection of surface course material which showed the excellence of the HSAI.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.1
• /
• pp.35-50
• /
• 2000

본 논문에서는 반복하중을 받는 철근 콘크리트 쉘구조물의 해석을 위한 비선형 유한요소 해법을 제시하였다 유한 요소로서는 충상화기법을 이용한 부재회전강성도를 갖는 4절점 평면 쉘요소가 개발되었다 두께 방향에 대한 철근과 콘크리트의 재료성질을 고려하기 위하여 충상화기법이 도입되었다. 재료적 비선형성에 대해서는 균열콘크리트에 대한 인장, 압축, 전단모델과 콘크리트중에 있는 철근모델을 조합하여 고려하였다. 이에 대한 콘크리트의 균열모델로서는 분산균열모델을 사용하였으며 철근에 대해서는 1축 응력상태로가정하여 등가의 분산 분포된 철근량으로 모델화하였다 구성모델은 재하, 제하 그리고 재재하과정을 포함하여 요소는 반복하중하에서 철근콘크리트 쉘의 거동을 파악할 수 있다 신뢰성 있는 실험결과와 비교를 통하여 본 논문의 해석방법이 반복하중을 받는 철근콘크리트 쉘구조의 비선형 해석에 적합한 방법임을 입증하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.267-279
• /
• 2009

A numerical model that can simulate the nonlinear behavior of ultra high strength fiber reinforced concrete (UHSFRC) structures subjected to monotonic loading is introduced. The material properties of UHSFRC, such as compressive and tensile strength or elastic modulus, are different from normal strength reinforced concrete. The uniaxial compressive stress-strain relationship of UHSFRC is designed on the basis of experimental result, and the equivalent uniaxial stress-strain relationship is introduced for proper estimation of UHSFRC structures. The steel is uniformly distributed over the concrete matrix with particular orientation angle. In advance, this paper introduces a numerical model that can simulate the tension-stiffening behavior of tension part of the axial member on the basis of the bond-slip relationship. The reaction of steel fiber is considered for the numerical model after cracks of the concrete matrix with steel fibers are formed. Finally, the introduced numerical model is validated by comparison with test results for idealized UHSFRC beams.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.193-199
• /
• 2016

MR(magnetorheological) devices for vehicle applications requires the consistent control performance and the reliable operation. However, the corrosion of iron particles consisting the MR fluid can significantly affect on MR properties. This paper presents an effect of the MR particle corrosion on the performance of MR fluids such as shear stress magnitude which is directly concerned with control performance. As a first step, MR particles are corroded by water-calcium chloride solution. The resulting MR particles are examined by scanning electron microscope (SEM) and their molar ratios are analyzed by the energy dispersive X-ray analysis (EDAX). By dispersing the corroded MR particles into silicone oil, the corroded MR fluid is synthesized for evaluation of MR effect change. A rotational viscometer is adopted to measure shear stress magnitude. Finally, it is demonstrated how much the corrosion affect on performances by comparing the normal MR fluid to the corroded MR fluid, from which performance investigation of the MR devices containing the corroded MR particles will be studied in the second phase of this study.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.223-234
• /
• 1996

The purpose of this paper is to present an analysis method by using the finite element method which can exactly analyze load-deflection relationships, crack propagations. and stresses and strains of reinforcements, tendons, and concrete in behaviors of elastic. inelastic and ultimate ranges of reinforced and prestressed concrete slabs under monotonically increasing loads. For t h i s purpose, the m a t e r i a l and geometric nonlinearities are taken into account in this study. The total Lagrangian formulation based upon the simplified Von Karman strain expressions is used to take into account the geometric nonlinearities of the structure. The material nonlinearities are taken into account by comprising the tension, compression. and shear models of cracked concrete and models for reinforcements and tendons in the concrete : and also a so-called smeared crack model is incorporated. The reinforcements and t,endons are assumed to be in a uniaxial stress state and are modelled as smeared layers of equivalent thickness. For the verification of application and validity of the method proposed in this paper, several numerical examples are analyzcd and compared with experimental results. As a result, this method can successfully predict the nonlinear and inelastic behaviors throughout the fracture of reinforced and prestressed concrete slabs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.141-141
• /
• 2018

자연하천에 존재하는 식생은 동식물에게 주거지를 제공할 뿐만 아니라 영양염류 흡착 및 정화작용을 통해 수질을 개선시키는 역할을 한다. 이러한 식생하천에 오염물질이 유입될 경우 식생에 의한 흐름 교란 작용으로 인해 오염물의 확산거동에 큰 영향을 주게 된다. 본 연구에서는 식생하천에서의 오염물질 혼합특성을 분석하기 위해 식생모형 실험을 수행하였고, Fischer et al (1979)이 제시한 이론식을 실험결과에 적용하여 종분산계수를 산정하고자 한다. 본 연구에서는 자연하천을 재현하기 위해 실험수로에 수중식생 모형을 설치한 후 ADV-Vectrino유속계를 이용하여 유속을 측정하였으며 실험을 통해 식생흐름에서의 유속분포 자료를 취득하고 이를 바탕으로 종분산계수를 산정하였다. 먼저 수중 식생흐름에서 연직유속분포를 측정한 결과, 식생이 존재하는 바닥근처에서는 유속이 느리다가 비식생 구간으로 가면서 유속이 증가하는 분포를 나타낸다. 또한 이 설치된 테스트 구간에 밀도와 유량변화에 따른 케이스를 적용하여 비교 및 분석을 한 결과 식생 밀도를 고정시키고 유량을 증가 시켰을 때 식생구간과 식생이 없는 구간에서의 유속도 증가하는 경향을 보였으며, 유량을 고정시키고 식생의 밀도를 순차적으로 높였을 경우 식생구간에서의 유속이 점차적으로 줄어드는 경향을 보였다. 다음으로 분산계수를 결정하는 방법에는 농도자료를 이용하는 방법과 유속자료를 이용하는 방법이 있는데 본 연구에서는 유속자료를 Fischer et al. (1979)의 이론식에 적용하여 분산계수를 산정하는 방법을 적용하였다. Fischer et al. (1979)가 제시한 식에서 먼저 전단 유속 값을 산정하기 위해 벽법칙 (Karman, 1930), 레이놀즈 전단응력 그리고, 난류운동에너지 (Graf, 1998) 방법을 사용한 후 복잡한 난류 흐름에 적용하기 가장 적합하다는 난류운동에너지 방법을 적용하여 전단 응력이 가장 크게 나온 식생모델 끝단에서의 값을 사용하였다. 그 결과, 수중 식생이 존재하는 흐름에서 무차원화 시킨 종분산계수는 6.89-9.78로 나타났다, 이는 Elder (1959)의 수심 적분을 통해 제시한 종분산계수 값 5.93보다 크다. 즉, 수중 식생이 존재할 경우 종분산계수는 식생이 존재 하지 않을 때 보다 증가하는 것으로 보여 진다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.1
• /
• pp.39-46
• /
• 2018

In this paper, an unbonded post-tensioning anchorage for a single-stranded wire that allows more efficient stress distribution in the post-tensioned anchorage zone was developed by using a finite element analysis using a commercial program. The stress analysis was carried out using a 3D model in the anchorage zone of the concrete member using the developed anchorage. The result of analysis ensured that the developed anchorage reduced the maximum bursting stress in anchorage zone compared to the case of existing anchorage and the location where maximum bursting stress also occurred closer to the anchorage. Bursting force was calculated using AASHTO, modified $M{\ddot{o}}rsch$ and Stone. As a result, it was concluded that an effective reinforcement design of the anchorage zone can be designed by modified $M{\ddot{o}}rsch$.