• 동력기계공학회지
• /
• 제10권2호
• /
• pp.5-10
• /
• 2006

Our environment is faced with serious problems related to the air pollution from automobiles in these days. In particular, the exhaust emissions of diesel engine are recognized main cause which influenced environment strong. In this study, the potential possibility of biodiesel fuel was investigated as an alternative fuel for a naturally aspirated common rail diesel engine. The smoke emission of biodiesel fuel 30vol-%(max. content) was reduced in comparison with diesel fuel, that is, it was reduced approximately 60% at 4000rpm, full load. But, power, torque and brake specific energy consumption didn't have no large differences. But, NOx emission of biodiesel fuel was increased compared with commercial diesel fuel.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.1-7
• /
• 2001

Recently, several LPG engines for heavy-duty vehicles have been developed, which can replace some diesel engines that are one of a main source for air pollution in urban area. As a preliminary study on the liquid phase LPG injection (hereafter LPLI) system applicable to a heavy duty LPG engine, the engine output and combustion performance were investigated with various combustion chambers and fuel compositions using a single cylinder engine equipped. Experimental results revealed that ellipse, double ellipse and nebula type combustion chamber made a more advantage in breaking swirl flow into small turbulence scale than bathtub type. Especially, performance of nebula type showed most highest efficiency and engine output under lean mixture conditions. An investigation fur various LPG fuel compositions was also carried out, and revealed that the case with 40% propane and 60% butane shows the lowest efficiency at stoichiometry, however, as the mixture became leaner its efficiency increased and became even higher for 100% propane case.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.31-35
• /
• 2004

A new combustion strategy called LIFC(Late Injection ＆ Fast Combustion) was developed for simultaneous reduction of particulate matter(PM) and nitrogen oxides(NOx) in exhaust emission of diesel engines, In this study, effects of injection timing and injection pressure under relatively high EGR rate were investigated. The experiments were conducted in a conventional engine over a range of commercial engine speed. The test engine could be operated in LIFC up to 2000rpm / bmep 5 bar condition with significant reduction of NOx and PM. The experimental results showed potential for the mechanism of the simultaneous reduction of NOx and PM from HSDI diesel engines.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.85-91
• /
• 2001

LPG has been well known as a clean alternative fuel for vehicles. As a fundamental study on liquid phase LPG injection (hereafter LPLI) system application to heavy-duty engine, engine output and combustion performance were investigated with various operating conditions using a single cylinder engine equipped with the LPLI system. Experimental results revealed that no problems were occurred in application of the LPG fuel to heavy-duty engine, and that volumetric efficiency and engine output, by 10% approximately, were increased with the LPLI system. It was resulted from the decrease of the intake manifold temperature through liquid phase LPG fuel injection. These results provided an advantage in the decrease of the exhaust gas temperature, in the control of knocking phenomena, spark timing and compression ratio. The LPLI engine could normally operated under $\lambda$=1.5 or EGR 30% condition. The optimized swirl ratio for the heavy duty LPG engine was found around R_s$ = 2.0.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.1007-1009
• /
• 2010

실험을 통하여 엔진의 성능을 파악하고자 한다면 적지 않은 시간동안 많은 비용과 노력이 필요하다. 최근 연구에서는 이러한 단점을 해결하기 위해 CFD를 이용 선행해석을 통해 미리 그 엔진의 성능을 예측하여 실험에 들이는 시간과 비용을 줄여가고 있다. 본 연구는 실험을 통하여 소형엔진의 성능을 알아보기 이전에 선행해석을 통해 소형엔진의 성능을 예측하고자 한다. 소형엔진의 선행 해석을 위해 전자제어 연료분사 방식의 400cc급 소형엔진을 모델링하고 1D 해석프로그램인 GT-Power를 통하여 엔진의 Toque, Power 및 배기가스를 예측하였다.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.73-78
• /
• 2004

The liquid phase LPG injection (LPLi) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type(the second generation technology) fuel supply system. To investigate the durability property of core part of injector in liquid phase LPG injection system, leakage test, SEM test of injectors and analysis of unvaporized fuel components with various LPG fuel qualities were tested. The experimental results showed that no serious problem in durability test using favorable LPG fuel quality, while high leakage amount due to the large scratches in the needle and nozzle of the injector were found using LPG fuel with highly containing olefin components, especially butadiene species.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.89-89
• /
• 2017

해양경찰 소형 경비정에 주로 장착되었던 물분사(water jet type) propeller가 중대형 경비함으로 점차 확대되고 있으며, 축 형식은 2~4축, 유동을 제어하는 bucket 유형도 DRB, CSU(SRB) 방식으로 나뉘어져 있다. 그러나, W/Jet 추진기 고유의 운동 특성이 반영된 조함법의 연구가 부족한 편이다. 여기서는 함정에 장착된 W/Jet 유형별 SHS를 통하여 직접 구현해 보고, SHS 구현이 현실적으로 어려운 함정은 해양경찰 함정장들의 면담을 통하여 습득한 것을 이론적으로 구현 제시하여, 함정 조함시 지식적인 인적오류를 최소화하여 W/jet 추진기가 장착된 함정 승조원의 조함 능력 향상 및 안전운항에 기여하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2904-2909
• /
• 2008

The liquid phase LPG injection (LPLi) system (the 3rd generation technology) has been considered as one of the more promising fuel supply systems for LPG vehicles. To investigate the characteristics of LPG residue in LPLi system, various rubbers were reacted with LPG fuels. The results showed that the residue of a cover rubber in a fuel pump after test increased 10 times higher than that before test. Furthermore, the amount of sulfur, nitrogen species which are considered as main sources in deposit formation in the LPLi fuel injector were also found to be higher than that in original LPG fuel. And these residues made the core parts of LPLi injector such as a neddle and a nozzle, partially worn, which eventually causes a leakage in LPLi injectors.

• 대한기계학회논문집B
• /
• 제39권4호
• /
• pp.351-358
• /
• 2015

세계적인 배출가스 규제의 강화와 함께 화석 연료의 매장량 감소와 유가 상승은 새로운 엔진 기술 개발을 촉진시켰다. 가솔린 직접 분사(GDI; Gasoline Direct Injection) 엔진은 연료를 직접 연소실에 공급하고 정밀한 연소제어를 통해 공연비가 희박한 혼합 상태에서도 연소가 가능하게 하였는데, 이러한 방식은 기존 포트 분사 엔진보다 연비와 출력을 모두 향상시킬 수 있다. 하지만 GDI엔진은 디젤 엔진의 경우와 마찬가지로 soot 발생률이 높아짐에 따라 입자상 물질의 배출이 증대되는 문제를 안고 있다. 이러한 문제를 해소하고자 본 연구에서는 가솔린 입자상 물질 필터(GPF; Gasoline Particulate Filter)를 개발하여 입자상 물질의 배출정도를 저감시키고자 하였다. 필터의 설계 효율에 따라 3가지의 Metal foam 필터와 단일 Metal fiber 필터를 실험에 적용하여 PM과 PN의 저감률을 비교하였다.

• 대한기계학회논문집B
• /
• 제38권10호
• /
• pp.837-844
• /
• 2014

최근 자동차 제조사는 강화되는 배출가스 규제를 만족시키고 엔진 효율을 향상시키기 위해 다양한 기술을 연구하고 있다. 그 중 직접분사식 초희박 연소기술은 정밀한 연소제어를 통해 연소효율을 극대화 하고 연비를 향상시킬 수 있는 차세대 기술로 평가받고 있다. 기존 가스엔진에 초희박 직접분사기술을 적용하기 위해 기존의 MPI 엔진의 헤드를 재설계하였다. 기존 압축비10:1에서 12:1로 증가시킴으로써 이에 따른 압력선도, 열방출률, 연료소비율 등의 연소특성과 배출가스특성을 파악하였다. 압축비를 증가시킴에 따라 불안정한 연소상태로 인하여 연료소비율의 개선이 어려웠으나 탄화수소(THC)와 질소산화물(NOx)의 배출은 감소되었다.