• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.2
• /
• pp.39-45
• /
• 2016

In a coaxial porous injector, a gas propellant is injected through the porous cylinder surface to the liquid jet which is encircled by a porous cylinder. In this study, to observe the differences in disintegration mechanisms between a shear coaxial injector and a coaxial porous injector, cold-flow tests and 2-D axisymmetric numerical analysis have been carried out. The shadowgraph images and Sauter mean diameters were compared in similar experimental conditions, and the effects of velocity distributions at the inner injector region on the disintegration of liquid jet were investigated through the numerical calculations. As a result, in high air mass flow rate condition, the disintegration performance of coaxial porous injector is better than shear coaxial injector, in spite of a lower velocity at the inner injector region.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.949-952
• /
• 2017

Spray characteristics of the impinging injectors in subsonic crossflows were experimentally studied and compared with the plain-orifice injectors. By changing the impingement angle (60, 90, 120) which is the same orifice length to diameter ratio (L/d = 5), spray characteristics were investigated. In the view of the top view from the impinging injectors, as the impingement angle increases, the liquid column breakup length in the y-direction was decreased. On the other hand, when the impinging injector is viewed from the side view, the breakup length in the x direction is smaller than the previous plain-orifice injectors, which mean that the atomizing performance of the impingement-type injector is better than that of the single-hole orifice.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.41-51
• /
• 2001

Combustion characteristics of a KSR-III liquid rocket engine with split-triplet (F-O-O-F) type injector elements are investigated numerically from the viewpoints of engine performance and combustion flowfield. To evaluate numerical analysis of liquid rocket engine with radial type injector arrangement, 2-D axisymmetric and 3-D calculations are carried out and the prediction of engine performance for design and off-design conditions is in a good agreement with hot-firing tests. According to 2-D axisymmetric and 3-D calculations, the prediction error is 3∼5 % from the standpoint of performance. Numerical results of combustion characteristics calculated through 3-D analysis agree well with hot-firing tests qualitatively at injector plate. Decreasing impinging angle and changing radial type injector arrangement to H type injector arrangement reduce effectively local high-temperature region. Also, it is examined that those affect the performance seriously. In conclusion, it is revealed that both injector arrangement and impinging angle are critical parameters to affect the performance and combustion characteristics of the liquid rocket engine.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.699-703
• /
• 2017

Numerical simulations of closed-type and open-type single injectors were conducted to investigate the flow characteristics of a swirl-coaxial injector used in a liquid rocket engine. Numerical analysis was conducted using a commercial program ANSYS FLUENT. The injectors has three models with different recess length. Numerical analysis was conducted to investigate the variation of the flow characteristics of the injector when the flow condition were changed. It was also compare and analyzed with experimental results. The results obtained from the numerical simulation show that the difference between the inlet pressure and the discharge coefficient is not significant.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.126-142
• /
• 2020

This study aims to provide basic design data for a pintle injector and its combustion device through case study on the research and development of combustion devices to which a liquid-liquid pintle injector was applied. From data analysis, it was possible to provide the initial dimension of the combustion chamber and pintle injector based on the engine thrust, and the geometric characteristics of the high-efficiency injector. In addition, the pintle tip heat damage prevention mechanism and materials, face-shutoff pintle injector implementation method, and central propellant selection criteria were summarized. Theses results will be used as basic data for the design criteria of an initial pintle injector combustion device.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.61-66
• /
• 2004

The objective of the present study is to develop methodology for the assessment of combustion stability of liquid rocket injectors. To simulate actual combustion occurring inside of a thrust chamber, a fullscale injector has been employed in the study, which bums gaseous oxygen and mixture of methane and propane. The main idea of the experiment is that the mixing mechanism is considered as a dominant factor significantly affecting combustion instability in a fullscale thrust chamber. A single split triplet injector has been used with an open-end cylindrical combustion chamber. The characteristics revealed by excited dynamic pressures in gaseous combustion show degrees of relative acoustic damping depending on operating conditions. Upon test results, the direct comparison between various types of injectors can be realized for the selection of the best design among prospective injectors.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.407-410
• /
• 2005

Acoustic coupling between combustion chamber and gas-liquid scheme injectors are studied numerically in liquid rocket engine adopting linear acoustic analysis. The injectors can play a role as half-wave resonators. The combustion chamber with numerous injectors shows peculiar acoustic coupling with the injectors. As the injector length approaches a half wavelength or the original tuning length, new injector-coupled acoustic modes show up in the chamber and thereby, the acoustic-damping effect of the tuned injectors is appreciably degraded.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.5-8
• /
• 2010

The GCSC injectors studied in this paper are those applied to the combustion chamber of staged combustion engines. Liquid fuel is injected through tangential holes along the outer wall of the GCSC injector forming a swirling sheet and oxygen rich gas generated by a preburner enters axially through the center orifice of the injector to form a gaseous jet. The spray characteristics of GCSC injectors under ambient/high pressure conditions and the effect of recess on spray characteristics have been examined in this paper. These results are expected to be used as fundamental data to develop of a staged combustion engine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.57-63
• /
• 2007

The oxidizer-rich preburner is applied to the high efficiency closed cycle rocket propulsion system. This system is generally operated on oxidizer-fuel mixture ratio over than 50. The spray quality and mixing performance are very important for stable combustion of this preburner. This paper presents basic design concept and spray characteristic of the oxidizer-rich preburner injector and this result could be applied to the development of the oxidizer rich preburner system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.5
• /
• pp.72-77
• /
• 2007

The combustion test results of the sub-scale combustor having dual swirl injector with internal mixing for a liquid rocket engine are described. The sub-scale combustor uses liquid oxygen(LOx) and kerosene as propellants and has an injector head, an ablative material combustor wall and a water cooled nozzle. The injector head has LOx manifold, fuel manifold, fire face plate, one center swirl injector and 18 main swirl injectors of internal mixing. The combustion tests were successfully performed at design and off-design points without any damages on the injectors. Combustion characteristics velocity of 1756m/s was measured at design point. High frequency combustion instability was not observed but low frequency pulsations occurred at off-design conditions.