• 제목/요약/키워드: 분무분열

검색결과 153건 처리시간 0.02초

오목표면곡률이 난류원형충돌제트의 열전달에 미치는영향 (Concave surface curvature effect on heat transfer from a turbulent round impinging jet)

  • 임경빈;이대희
    • 대한기계학회논문집B
    • /
    • 제21권5호
    • /
    • pp.691-699
    • /
    • 1997
  • The effects of concave hemispherical surface curvature on the local heat transfer from a turbulent round impinging jet were experimentally investigated. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds number ranges from Re=11,000 to 50,000, the nozzle-to- surface distance from L/d=2 to 10, and the surface curvature from D/d=6 to 12.The present results are also compared to those for the flat plate case. In the experiment, the local Nusselt numbers tend to increase in all regions with an increasing surface curvature. The maximum Nusselt number for all Reynolds numbers occurred at L/d .ident. 6 and a second maximum in the Nusselt number occurred at R/d .ident. 2 for both Re=23,000 and Re=50,000 in the case of L/d=2 and for Re=50,000 only in the case of L/d=4. Meanwhile, as the surface curvature increases, the value of the secondary maximum Nusselt number decreases. All the other cases exhibit monotonically decreasing values of the Nusselt number along the curved surface. The stagnation point Nusselt numbers are well correlated with Re, L/d, and D/d.

이중 매니폴드 가변추력 분사기의 분무 특성에 관한 실험적 연구 (Experimental Study of Spray Characteristics on the Throttleable Dual Manifold Injector)

  • 윤정수;김성혁;윤영빈
    • 한국추진공학회지
    • /
    • 제15권3호
    • /
    • pp.22-30
    • /
    • 2011
  • 추력변화를 위한 방법에는 여러 가지가 있는데, 고압력 강하 시스템, 이중 매니폴드 분사기, 가스 분사, 다중 챔버, 펄스 추력, 움직이는 분사기 구성요소 등이 있다. 이 중에서 이중 매니폴드 분사기의 경우에는 하나의 분사기 구조에 서로 다른 두 개의 매니폴드를 가지는 분사기를 결합하는 방식의 분사기인데, 각 분사기는 각각의 연료 공급시스템을 독립적으로 가지고 있어 각 매니폴드마다 독립적으로 유량을 조절 할 수 있다. 본 논문에서는 이중 매니폴드 분사기를 사용하여 넓은 추력범위에서 연료분사의 안정성을 판단하기 위하여 각 매니폴드의 접선방향 유입구 넓이의 비와 분사압력에 따라 분사 형상을 측정하고, 분사기 오리피스 끝단에서 액막 두께를 측정하였다.

Glyphosate 독성(毒性): II. corydalis Sempervirens와 토마토의 세포배양체(細胞培養體)에서 EPSP-synthase의 활성(活性)에 미치는 영향(影響) (Glyphosate Toxicity: II. EPSP-synthase Activity in Cell Suspension Culture of Corydalis Sempervirens and Lycopersicon Esculentum)

  • 김태완;니콜라스 암라인
    • 한국잡초학회지
    • /
    • 제15권2호
    • /
    • pp.148-153
    • /
    • 1995
  • Glyphosate (N-[phosphonomethyl]glycine)를 토마토(Lycopersicon esculentum Mil)의 동화부위(同化部位)에 부분처리(部分處理)하거나 전(全) 식물체(植物體)에 분무처리(噴霧處理)하였을 때 EPSP-synthase의 활성(活性) 감소(減少)가 나타났다. EPSP-synthase의 활성(活性)은 처리된 식물체(植物體)의 엽록소(葉綠素)의 감소보다 시기적으로 먼저 나타나는 현상이었다. EPSP-synthase의 활성(活性)은 glyphosate처리(處理)에 민감한 효소(酵素)로서 토마토의 세포현탁배양조직(細胞顯濁培養組織)과 분열조직(分裂組織)간에는 활성(活性)의 차이가 없없다. EPSP-synthase의 활성은 4-6 nkat/mg protein 정도이었다. EPSP-synthase의 활성(活性)억제는 glyphosate 처리(處理) 36시간 후 부터 나타나기 시작하였고, 엽록소(葉綠素)의 감소는 처리 48 시간 후 부터 나타나기 시작하였다. 세포현탁배양(細胞顯濁培養)에서 치사농도(致死濃度) 이하(以下)에서 glyphosate는 생체중(生體重)을 저하(低下)시켰으며 생육단계(生育段階) 중 lag-phase를 연장(延長)시켜 생육(生育)이 더디도록 하였다. Glyphosate 존재(存在)하에서 생체중(生體重)은 계대(繼代)배양 후 14일이 지난 뒤에 생체중(生體重)이 최고(最高)에 달하였다. EPSP-synthase에 대한 gly-phosate의 억제(抑制)효과는 lag-phase에서 심하게 나타났다.

  • PDF