• Journal of ILASS-Korea
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1998

Two measurement techniques of droplet sizing, an imaging technique(PMAS) and a phase-Doppler measurement technique (PDPA), have been compared using a water spray from a pressurized-type swirl nozzle. The result showed that SMD measured by PDPA was larger than that measured by PMAS by about 40 %. Such discrepancy of SMD could be explained by the fact that the light signal intensity used by PDPA can be biased towards larger particles. On the other hand there could be lower opportunity to capture the images of the large particles with PMAS, since the large particles could be out of sight due to their high speed.

• Korean Journal of Microbiology
• /
• v.46 no.1
• /
• pp.109-111
• /
• 2010

Recent studies have described various microorganisms that can degrade PAH, however, there are currently limited methods available to screen for PAH-degrading microorganisms. To screen for PAH-degrading microorganisms, a sublimation method (Alley, Jeremy F. and Lewis R. Brown. 2000. Appl. Environ. Microbiol. 66, 439-442) was modified to produce a simple screening system. In our results, there were several bacterial species capable of pyrene degradation including genera, Coryenbacterium, Gordonia, Rhodococcus, and Streptomyces, which have been screened from 350 bacterial isolates of commercial gasoline and oil-spilled sediment by the sublimation method. The main advantage of this method is that it (i) safely deposits an even, thin and visible layer of PAH onto the agar surface without the use of solvents and (ii) the quantity of PAH sublimed onto the agar can be easily controlled. Overall, this sublimation method may be an effective and simple technique to screen for PAH-degrading microorganisms.

• Korean journal of applied entomology
• /
• v.31 no.2
• /
• pp.182-189
• /
• 1992

The influnces of 9 kinds of solvents on the toxicities against several insect species, phytotoxicity and solubility of compounds were evaluated by means of leaf dipping and spray methods. In case of the spray application, density and vapor pressure seemed to be a contributing factor to lethal toxicity against brown planthopper and diamond-back moth, respectively; the bigger the property of density and the smaller the vapor pressure gave the stronger toxicity. It appeared that the toxicity of solvents was not correlated with anyone of physical properties such as boiling point, dipole moment, dielectric constant, surface tension and viscosity. Spray treatment gave more toxicity to insects than leaf dipping treatment. Although dielectric constant and dipole moment seemed to be contributing factors to phytotoxic damage to rice seedling and bean plants, respectively, no general correlation between phytoxicity and the other physical properties was found. Leaf dipping application caused stronger phytotoxicity than spray application. It is concluded that 5% acetone solution may be most suitable to test chemicals because of its favorable solubility of compounds, lower toxicity to insects, and lower phytotoxicity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.3
• /
• pp.50-57
• /
• 2007

Spray characteristics of an injector in a small liquid rocket engine (LRE) is characterized by Particle Image Velocimetry (PIV) and Dual-mode Phase Doppler Anemometry (DPDA). Instantaneous plane images captured by PIV are examined for the qualitative prediction of spray breakup with the setup of evaluation technique for effect of spray angles on injector performance. DPDA is also applied in order to quantify the average velocity, turbulent intensity, SMD, and number density of spray droplets along the spray stream distance leading to precise observation of spray atomization behavior. An objective of the study is the derivation of design parameters of new injectors and the establishment of performance criteria through the clear understanding of spray characteristics.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.204-211
• /
• 2000

The $(Y,Gd)BO_3:Eu$ red phosphors for PDP application were synthesized by ultrasonic spray method and then their photoluminance properties were investigated under 147nm VUV irradiation. The precursor solution of acetates of Y, GD and Eu and boric acid diluted in water was sprayed using 1.7 MHz ultra-sonic sprayer into the reaction tube held at high temperature. The as-sprayed particles were amorphous phase having C-C and C-H bonds due to the insufficient thermal reaction during the pass along the tube. But the sprayed samples followed by heat treatment at $1100^{\circ}C$ had the same crystal structure and chemical composition as those samples followed by solid state reaction. It was found that the $(Y_{0.7}Gd_{0.3})_{0.95} BO_3:Eu_{0.05}^{3+}$ phosphor particles synthesized by spray at $500^{\circ}C$ and then heat treated at $900^{\circ}C$ had a spherical-like shape and fine particle size at $0.7{\mu\textrm{m}}$ having a narrow size distribution, while the phosphor particles made by solid state reaction was $3{\mu\textrm{m}}$ coarse and non-uniform size distribution. The emitting intensity under 147nm VUV excitation for $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}^{3+}$ phosphor prepared by spray method was found to be higher than those phosphor made by solid state reaction and the commercial $(Y,Gd)BO_3:Eu$ product.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.18-18
• /
• 1999

• Korean journal of applied entomology
• /
• v.31 no.4
• /
• pp.452-460
• /
• 1992

To establish the economical and reliable routine bioassay system for developing new insecticidal compounds, effects of leaf-dipping time, application methods, insect species and their developmental stages on susceptibilities of insects to insecticides were studied. The stable insecticidal activity appeared at the dipping time for 30-60 seconds in leaf-dipping method, and the most effective application methods were leaf-dipping method for apterous green peach aphid adults, and third instars of diamond-back moth and tobacco cutworm, whereas seedling+insect spray method for adults or third instars of brown planthoppers. For two-spotted spider mite, leaf-dipping or intact plant spray method was favorable. In the bioassay for chitin synthesis inhibitors, the inoculation of third instars of brown planthopper, diamond-back moth, tobacco cutworm and green peach aphid, and larvae of two-spotted spider mite to the young host plants treated by spray method were adequate bioassay methods.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.179.1-179.1
• /
• 2005

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.76-80
• /
• 2010

In this study, YDC powders with uniform composition and particle size were synthesized by a citrate method and their thin film deposition was conducted by electrospray deposition method. Polymeric precursor was prepared first by reaction of metal salts with citrate acid and ethylene glycol. Fluorite crystalline YDC powders were obtained by calcining the precursor at $750^{\circ}C$ for 3 h. The electrospray deposited films prepared at the optimum conditions became dense and defect-free after heat treatment at $1400^{\circ}C$ for 3 h. The film thickness was linearly varied with the deposition time.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.14-18
• /
• 1988

액체의 미립화는 액체연료의 연소를 위한 분무, 분무 도장, 농약 살포, 의료기기, 용융 금속의 금속 분말의 제조 등의 여러분야에 널리 이용되고 있다. 특히 연소 기관은 액체 연료의 미립화와 증발 특성에 따라 기관의 연소와 성능은 크게 변화하므로 연소실 내의 연료 미립화 특성의 개선은 매우 중요하다. 미립화에 영향을 미치는 인자에는 연료의 물성과 분사 기구 및 분사 밸브 등의 구조와 분사압력 등은 연료 미립화에 주된 영향을 미치는 요인의 하나가 되고 있다. 여기서는 주로 액체연료의 미립화에 일반적인 기초 사항과 분무 특성의 표시 방법, 측정법에 대하여 기술하기로 한다.