• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.627-637
• /
• 1985

The combustion process and the performance of a diesel engine are seriously affected by the ignition delay period of the fuel used. Some methods for improving the combustion process in the engine cylinder are to well match the strength of air swirl with the space of sprays in the cylinder, to blend an ignition improver in the fuel, to inject a small amount of auxiliary fuel prior to main injection and so on. Recently, the improvement of fuel economy and the reduction of exhaust smoke and NO have been successfully achieved by supplying diesel engines with emulsified fuel. However, it is very difficult to know real combustion mechanism under such special conditions, because of many factors affecting on the combustion process in practical reciprocating engine. In the present paper, the combustion processes of diesel fuel and emulsion fuel were tried to improve and to observe by making contact with various lean pre-mixtures in the hot air stream duct. This hot air stream method has an advantage that the spontaneous combustion process can be observed under a simplified condition.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.569-576
• /
• 2023

An agricultural drones are gradually increasing in utilization due to economic efficiency, and consist of a main frame in charge of flying spray system in charge of moving pesticide to control targets. Therefore, the environment and characteristics of crops should be considered when controlling pesticides using drones and conditions such as systematic flying altitude of flight, speed, and spray time should be changed accordingly. However, pest control work using agricultural drones has different spray effects depending on level the operation proficiency and spray impact. In addition, there are variations in operating standards and control efficiency for agricultural drones, which hinder the distribution of agricultural control drones in the field of pest control work. Therefore, this study attempts to identify the spraying characteristics of agricultural drones, apply the effective spraying time, interval and experimentally verify the system that can calculation of spray area compared to previous studies. Through this experimental verification, it is intended to apply the optimal control process by minimizing the obstacles to pest control work by applying the operation method and systematic figures to agricultural drones.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.3-44
• /
• 1986

In order to obtain the basic physical and mechanical properties of steel wire reinforced particleboard, particleboards were formed with large particles through 2.11 mm (12 meshes) and retained on 1.27mm (20 meshes) sieves and small particles through 1.27mm (20 meshes) and retained on 0.42mm (60 meshes) sieves from the plywood mill wastes of meranti (Shorea spp.) in the form of pallmanchips, applying urea-formaldehyde resin as an adhesive on the particle surface in 10 percent on the oven dried weight of particles, and arranging steel wires of 1mm in diameter 5,10,15,20, and 25mm in longitudinal and transverse direction with crossing in the mid of the board depth in single layer boards, 10mm in longitudinal or transverse direction without crossing in two layers and 10mm in longitudinal and transverse directions with and without crossing in three steel wire layers boards. The stepwise 9-minutes-multi-pressing schedule in 5 minutes at 35 kgf/$cm^2$, 2.5 minutes at 25 kgf/$cm^2$. and 1.5 minutes at 15 kgf/$cm^2$ was applied for $300{\times}200{\times}13$mm board at the temperature of 160$^{\circ}C$ in a hot press. Specific gravity, thickness swelling, bending properties of modulus of rupture (MOR), modulus of elasticity(MOE), work to proportional limit, and work to ultimate load, internal bond (IB), and screw holding power(SHP) of the reinforced boards were analyzed on the wire openings and wire layers. The results obtained are summarized as follows; 1) In specific gravity, particleboards with large particles and small particles had higher value with more steel wire placements and more steel layers composition, 2) Particleboards with large particles in accordance with more steel wire liners composition gave very poor thickness swelling. 3) The mechanical properties of particleboards formed with large or small particles were reinforced with more steel wire layers. Therefore, bending strength was improved in modulus of rupture, modulus of elasticity, and work to ultimate load. Especiallv, particleboards with two or three steel wire layers showed the tension lamination effect when the steels in lower steel wire layer were oriented parallel to the board length. 4) The modulus of rupture, modulus of elasticity, and work to ultimate load in bending varied with opening area, distance of lengthwise wires multipled by distance of transverse wires. Particleboards formed with large particles resulted in higher value in modulus of rupture with 1.5-3 $cm^2$ opening area, 1-2cm distance between transverse wires, and 1.5-2.5cm distance between lengthwise wires. Particle boards formed with small particles showed higher value with 0.5-1.5$cm^2$ or 3.75-6.25 $cm^2$ opening area, 0.5 or 2.5cm distance between transverse wires. 5) In modulus of elasticity, particleboards formed with large particles with one steel wire layer suggested higher value with 5-3$cm^2$ opening area, 1-2.5cm distance between transverse wires and also 1-2.5 cm distance between lengthwise wires. Particleboards formed with small particles showed higher value with 0.75-1.25$cm^2$ or 3-6.25$cm^2$ opening area and 0.5 or 2.5cm distance between transverse wires. 6) Particleboards formed with large particles gaved higher value in work to ultimate load with 1-3$cm^2$ opening area. Particleboards formed with small particles showed increasing tendancy with decreasing opening area. 7) In internal bond and screw holding power, particleboards formed with large particles had increasing value in two and three steel wire layers compositions, but particleboards formed with small particles showed no difference. Particleboards formed with large particles containing one steel wire layer showed no difference in internal bond and screw holding power, and particleboards formed with small panicles containing one steel wire layer resulted in increasing value in internal bond and decreasing value in screw holding power in accordance with increase in opening area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.161-167
• /
• 1988

Studies were carried out to examine the effects of simulated acid rain on the various crops of rice, peper, tomato, pumpkin, egg plant, potato, soybean, radish, cucumber, common pea, sweet potato, corn, lettuce, chinse cabbage, spinach, under the condition of the rains of pH 3.0. The rain was adjusted to pH 4.0, 3.0, 2.0 with sulfuric acid, and soybeans were exposed with the various pH levels, eighteen times every other days. The symptoms of damage, ratios of destroyed leaf and sulphur content by leaves were investigated. The results obtained were as follows. 1. The exposure to the rain resulted in the reddish brown or white pigment spots in the leaves surface and the colour was developed red and darker along the edge of spots. 2. Most crops were affected with acid rain of pH 3.0 at which the amount of chlorophyl was decreased. 3. The spinach, chinese cabbage, lettuce were sensitive to the acid rain, however, the peper, tomato pumpkin were resistance to it. 4. The content of chlorophyl was decreased with increasing leave injury. 5. The sulphur content in leave was increased with increasing acidity of the rain, however the yield was decreased.

• Korean Journal Plant Pathology
• /
• v.13 no.3
• /
• pp.167-171
• /
• 1997

To find optimum application methods of Epicoccosorus nematosporus for control of water chestnut, five different concentration of conidial suspensions ($10^[3}$ conidia/ml to $10^[7}$ conidia/ml) fo the fungus were applied 1 to 4 times on 10~40 days old seedlings of water chestnut in greenhouse. Inoculum levels equal to or greater than $10^[5}$ conidia/ml killed significantly more shoots (82.6%~92.1%) and suppressed significantly underground tuber formation compared to inoculum concentration less than $10^[4}$ conidia/ml. When the conidial suspension of ($6.3 {\times} 10^{5}$conidia/ml of E. nematosporus was sprayed 2 times in 7 days interval, percentage of the killed plants was up to 98.7%. Numbers of reshoots and tubers were alsosuppressed significantly compared to one time application. The percents of killed shoots were similar between 10-day-old and 20-day-old seedlings, and significantly higher than those treated on 30- or 40-day-old seedlings. The fungus treated on 20-day-old seedlings was the most effective because there was high number of reshoots from 10-day-old seedlings. Therefore, optimal application conditions for E. nematosporus is 2~3 times of application in 7 days interval with $10^[5}$ conidia/ml on 20-day-old seedling age.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.336-342
• /
• 2012

This study was carried out in order to compare the residue levels of pesticides among lettuce, kale and perilla leaf depending on the morphological characteristics of plant. Residue levels were investigated at the zero, second, fifth days after last application, 9 species of systemic or non-systemic pesticide were twice applied with 7 days interval by knapsack power sprayer with 2 heads fan shape nozzle. Ratios of leaf area to weight ($cm^2$ $g^{-1}$) were 58 of perilla leaf, 27 of lettuce and 23 of kale. Ratios of leaf area to weight of perilla leaf was 2.1 times higher than that of lettuce. Residue levels of perilla leaf were 1.3 to 2.3 times higher than those of lettuce at the day of spraying and 1.3 to 3.3 times higher at the fifth day. Therefore the differences of pesticide residues between perilla leaf and lettuce were affected by the ratio of leaf area to weight. Residue levels in lettuce were 2.4 to 7.3 times higher than those in kale at the day of spraying because the adhesive effect of pesticide particles on kale leaf was low.

• The Korean Journal of Mycology
• /
• v.35 no.2
• /
• pp.115-120
• /
• 2007

Powdery mildew caused by Podosphaera fusca is one of the most important diseases in leafy lettuce (Lactuca sativa L.). Since the disease has been a threat to safe cultivation of leafy lettuce, its control methods have to develop to produce good quality of lettuce for farmer and consumer. Occurrence of lettuce powdery mildew is increasing more and more due to continuous cultivation of lettuce all through the year, non-removal of diseased plant parts of lettuce, spray of inadequate fungicides by mistaken acknowledge of lettuce powdery mildew for lettuce downy mildew, etc. The control effect of five fungicides against lettuce powdery mildew was examined in a plastic greenhouse located in Suwon. When fungicides were sprayed three times at 10 days-intervals in the early stage of occurrence of powdery mildew, the incidence of powdery mildew in the plants treated with kresoxim-methy SC, azoxystrobin SC, Ampelomyces quisqualis AQ94013 WP, Paenibacillus polymyxa AC-1 SC and Bacillus subtilis Y 1336 WP was 0.7%, 0.7%, 26.0%, 36.7% and 42.0%, respectively, whereas the incidence of non-treated control was 55.3% on eight days after final application. Phytotoxicity of five fungicides tested was not observed in lettuce seedling plants.

• The Korean Journal of Pesticide Science
• /
• v.11 no.3
• /
• pp.186-193
• /
• 2007

Characteristics and control activity of copper hydroxide against pepper phytophthora blight caused by Phytophthora capsici were investigated in a greenhouse and a pepper field Copper hydroxide strongly inhibited the germination of zoosporangia and zoospores of P. capsici JHCS 2-5, showing $EC_{50}$ value by 0.6 and 0.3 ${\mu}g\;mL^{-1}$. With 1,040 ${\mu}g\;mL^{-1}$ of copper hydroxide in a greenhouse it showed 80% of the control value by soil-drenching application, while 16% by leaf-spraying. However, when it was treated enough to runoff to soil by leaf-spraying application with 50 ml per a pepper plant, it controlled a pepper phytophthora blight by 94.6 % of control value. Copper hydroxide showed a high protective activity at 1 and 3 days before application, while no curative activity. In a field it showed a high activity of 91%, when pepper plants were treated with copper hydorxide 4 times with a intervals of 10 days.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.299-304
• /
• 2012

In this work, we experimented with the two-fluid fogging system that eco-friendly prevents whiteflies in greenhouses in order to find the optimal concentration of oleic acid supplied through the system and to evaluate the control value of three consecutive treatments. The first experiment, which was to find the optimal concentration of oleic acid, used "Dotaerang Gold" tomatoes grown in stand-alone plastic greenhouse at Buyeo Tomato Experiment Station. We tested three levels of concentration of oleic acid, which were 0, 2000, and 4000 ppm. The second experiment, which was to evaluate the control value of three consecutive treatments of oleic acid, used "Rokusanmaru" tomatoes grown in Venlo type glasshouse at Gyeonggi-Do Agricultural Research & Extension Services. In this experiment, oleic acid of 2000 ppm was applied three times with two days intervals. The number of whiteflies was counted 2 two days after the last application of oleic acid. Even when oleic acid was not being applied, the two-fluid fogging system was run from 9:00 am to 5:00 pm whenever the temperature is higher than $25^{\circ}C$ or the humidity is lower than 75%. In the first experiment, the control value was 81.6% with 2000 ppm of oleic acid and 93.6% with 4000 ppm. It means that the higher the concentration is, the greater the control value. In the second experiment, 2000 ppm treatment resulted in 85.8% of the control value, which is higher than the required standard for insecticides. Hence, spraying oleic acid with the concentration of 2000 ppm three times with two days intervals turned out to be a very effective in the eco-friendly prevention of whitefly.

• The Korean Journal of Pesticide Science
• /
• v.16 no.2
• /
• pp.171-177
• /
• 2012

Pepper seedlings of 6-leaf stage were inoculated with cell suspension of Xanthomonas euvesicatoria 1523 7 days after the application of Bion-M by soil-drenching. Disease severity in the treatment with 20 ${\mu}g\;mL^{-1}$ of acibenzolar-S-methyl, with which Bion-M was composed, was 19%, whereas that of the untreated control was 75%. The resulting control value of acibenzolar-S-methyl was calaulated as much as 74.7%. The control value of acibenzolar-S-methyl was dependent with the applied concentrations and ranged 29.3% to 49.3% at 4.0 and 0.8 ${\mu}g\;mL^{-1}$ of acibenzolar-S-methyl, respectively. Phytotoxicity was observed at 20.0 ${\mu}g\;mL^{-1}$, as lower leaves became to be yellowed and defoliated. The cell density of inoculum suspension of X. euvesicatoria 1523 affected the control value of acibenzolar-S-methyl. With optical density (O.D.) of 0.5 the control value of 4.0 ${\mu}g\;mL^{-1}$ of acibenzolar-S-methyl was 86.0%. However, the control value improved as high as 97.8% at the O.D. value of 0.1. The control value was 75.0% in adult plant of pepper, when acibenzolar-S-methyl was treated by soil-drenching 7 days before inoculation with cell suspension of X. euvesicatoria 1523. The control effect of acibenzolar-S-methyl on pepper bacterial spot was obtained in pepper field, showing that the control value at 10.0 ${\mu}g\;mL^{-1}$ was 71.2%.