분말 입자 형태가 다른 2가지 스테인레스 강(SUS 316L)분말과 조성이 다른 2가지의 결합제를 이용하여 분말충전율의 변화를 가지도록 제조된 5가지 분말사출재에 대한 Bagley 보정 실험을 실시하여 Bagley 보정값에 대한 온도, 분말충전율, 분말 입자 형태 그리고 결 합제의 영향을 조사하였다. Bagley 보정값을 구하기 위한 자료 처리를 하는 과정에서 길이 가 긴 모세관(L/D=60) 의 압력손실이 Thixotropy에 의해서 감소한 현상을 발견하였다. 이는 모세관 점성측정기를 이용한 분말사출제의 점도 측정시 길이가 긴모세관의 사용이 바람직하 지 못하다는 것을 나타낸다. 분말사출재의 Bagley 보정값에 대한 온도와 결합제의 영향은 매우 미약하게 나타났는데 특히 결합제의 영향은 거의 나타나지 않는 것을 발견하였다. 분 말충전율과 분말 입자 형태의 Bagley 보정값에 대한 영향은 매우 크게 나타났으며 분말충 전율이 증가할수록 Bagley 보정값이 증가하고 분말 입자의 형태가 불규칙한 분말을 사용한 분말사출재의 보정값이 구형의 분말에 비해 높은 보정값을 나타냈다. 실험결과에 대한 고찰 결과, 분말사출재의 모세관 입출구에서 압력손실의 주 원인은 분말 이자간 마찰과 충돌이라 고 판단되었다.
Proceedings of the Materials Research Society of Korea Conference
/
2003.11a
/
pp.50-50
/
2003
용사 공정은 소재의 표면 특성을 개질하기 위한 가장 효과적인 공정의 하나로서, 최근 항공기용 엔진 부품을 포함하여 자동차, 및 각종 산업 분야에 폭 넓게 사용되고 있으나, 산업 환경의 고도화로 용사 코팅층의 다양한 분야에서의 고특성화가 요구되고 있다. 소재의 나노화는 이러 한 소재의 고 특성화 요구에 부응할 수 있는 새로운 기술로서, 현재 많은 분야에서 응용이 진행되고 있다. 특히 최근에는 나노기술을 용사 공정에 응용하기 위한 시도가 진행되고 있으나, 나노 분말 제조 기술이 아직 확립되어 있지 않고, 또한 나노 분말을 용사 공정에 응용하기 위한 기술의 부족으로 나노 용사공정에의 적용은 제한을 받고 있다. 이를 위해서는 나노분말 제조 기술의 개발이 이루어져야하고, 나노 분말 제조 기술과 용사 분말 제조 기술 그리고 용사 기술의 접목이 이루어 져야하는 어려움이 있다. 본 연구에서는 나노 용사용 분말을 제조하기 위 한 원료용 나노 분말을 화학적 공정에 의하여 제조 한 후, 이 분말의 유동도 및 밀도 제어를 위한 후 처리 공정을 개발하였다. 제조된 분말의 입자 크기는 약 150nm였으며, 용사 분말 제조후 분말의 겉보기 겉보기 밀도가 3.8g/cc로서 일반 용사용 분말에 비하여 우수하였다.
Proceedings of the Materials Research Society of Korea Conference
/
2003.11a
/
pp.96-96
/
2003
비정질 합금은 기존 결정질 합금에서는 얻을 수 없는 독특한 물리적, 화학적, 기계적, 전자기적 특성을 나타내는 것으로 알려져 있다. 비정질을 형성하기 위해서는 매우 큰 냉각속도가 필요하므로 제조 가능한 비정질 합금은 분말, ribbon, 박판 형태로 제한되어 있다. 최근 비정질 분말 제조 및 벌크 비정 질에 관한 연구는 많은 발전을 보아 왔지만, 아직도 고청정 비정질 합금 분말의 제조와 대량 생산화 관해서는 많은 연구가 요구된다. 본 연구에서는 고청정 Ni-Zr-Ti-Si-(Sn)계 벌크 비정질 분말을 가스분무법으로 제조하였다. 제조된 합금 분말은 각 입도 별로 구분하여, XRD 분석을 통하여 비정질 형성 가능 입도을 분석하였다. 분말의 외형은 SEM으로 분석하였으며, 미세구조는 TEM을 사용하였다. 열적특성은 DSC 분석으로 조사하였다. 또한 제조한 비정질 분말의 미세구조와 비교하기 위하여 Tg와 Tx 온도범위에서 열처리 한 분말의 미세구조를 분석하였다. XRD 분석 결과, 가스분무법으로 제조된 Ni-Zr-Ti-Si-(Sn) 분말 중에서 75$\mu\textrm{m}$ 이하의 분말은 비정질상을 가졌으며, 75$\mu\textrm{m}$ 이상의 분말은 결정질 또는 비정질의 혼합 상으로 구성되었다. 비정질 분말 회수율은 약 60% 이상이었다. 미세 TEM 분석에서 75$\mu\textrm{m}$ 이하 분말은 전형적인 비정질 Halo 형상을 보였으며, 결정질이 혼합된 분말은 비정질 기지상에 결정질 응고 수지상 조직이 혼합되어 있음을 확인하였다.
Proceedings of the Korean Powder Metallurgy Institute Conference
/
2003.04a
/
pp.34-34
/
2003
전기설()폭발(Electric Wire Explosion)법은 고밀도 전류를 금속와이어에 인가시키면 저항 발열에 의해서 금속와이어가 빠르게 가열되고, 수$\mu$sec 이내에 초기체적에 비해 2~3배나 팽창한 후 폭발하는 현상을 이용하여 나노분말을 제조하는 방법으로써, 다른 제조방법에 비해 값싼 비용으로 1~50$\mu$sec의 짧은 시간동안 극히 높은 온도($10^4~10^6K$)에 도달하기 때문에, 와이어 전체가 동시에 기화하여 원재료의 조성을 갖는 분말의 합성이 가능하며, 공급되는 에너지와 시간, 챔버의 용적과 압력을 제어함으로써 평균 분말 크기를 조절할 수 있다는 잇점이 있다. 또한, 금속 와이어 주위의 분위기를 조절함으로써 금속나노분말뿐만 아리나 산화물$\cdot$질화물$\cdot$탄화물 분말, 합금 분말, 화학적 화합물이나 복합재료 나노분말들을 만들 수 있어서 여러 산업분야에 대한 응용이 크게 기대되고 있다. 본 연구에서는 전기선()폭발 챔버(Fig. 1) 와 최대 20kV까지 제어 가능한 고출력 펄스 전원장치를 자체 제작하고, 이를 이용하여 은(Ag)나노분말 합성에 대한 실험을 행하였다. 이렇게 제조된 분말은 SEM, XRD, PSA, BET 등을 이용하여 비교분석 하였다.
This study was conducted the physicochemical and sensory characteristics of fish paste with yam powder(0~5%). The pH of the samples ranged from 6.89 to 7.02, and moisture content ranged from 79.53 to 80.44%. Increasing the amount of yam powder in the fish paste tended to decrease the lightness(L) in Hunter color value while increasing the redness(a) and yellowness(b). For the textural characteristics, the addition of yam powder increased strength, gumminess, cohesiveness and springiness. Fish paste with 3~5% yam powder had good flexibility and wasn't broken even after 4 times folds. In sensory evaluation, the addition of 2% yam powder had the best score in color, taste and overall preference. Therefore, this results suggest that 2% yam powder can be applied to fish paste for the purpose of high quality, preference and functionality.
Journal of the Korean Society of Food Science and Nutrition
/
v.37
no.3
/
pp.342-347
/
2008
This study was to develop processed food with the addition of onion powder by investigating the quality characteristics of cookies with various levels (0, 1, 3, 5 and 10%) of hot-air dried yellow and red onion powder. Moisture (11.59%), crude protein (4.56%), and crude ash contents (3.83%) of yellow onion powder showed higher value than red onion powder. Hot-air dried yellow onion powder showed a higher L and b value as compared with red onion powder because of the unique color of the onion. Browning index was lower in red onion powder than red onion powder. Phenolic contents of yellow onion powder appeared to be higher than that of red onion powder. Total sugar contents were higher in red onion powder than yellow onion powder. The pH of the dough significantly decreased with increase of added onion powder contents. Dough density of control had a significantly higher value than the other samples. Hardness measurement showed significantly higher value with increasing additions of onion powder contents; added red onion powder samples were the most highest when compared to added yellow onion powder samples. Results of sensory characteristics showed significantly higher smell, taste, texture and overall acceptability with 3% added red onion sample. Quality characteristics of 5% added yellow onion powder sample and 3% added red onion powder sample indicated possibilities for developments of onion cookies.
Rheological characteristics of Sm-Co type plastic magnet compound for powder injection molding process were investigated with the variation of the magnetic powder size, their relative contents and volume fraction using the mixture of fine and coarse powder. Shear viscosity of Sm-Co type compound was decreased with increasing the size of coarse powder due to the increase of powder packing density. However, the smaller the average size of fine powder resulted in the higher viscosity of compound due to the increase of agglomeration force. In case of mechanically milled Sm-Co type powder, the viscosity of compound with the mixture of coarse powder of 125∼75 ㎛ and fine powder of average size of 4.9 ㎛ greatly depends on their relative contents and shows a minimum value at the 60 % coarse powder fraction. This means that the compound shows a maximum packing density at the 60% coarse powder fraction. Compound viscosities satisfied well the rheological model with the volume fraction of magnetic powder, and maximum volume fraction of magnetic powder in Sm-Co type compound for powder injection molding was about 66%.
Proceedings of the Korean Nuclear Society Conference
/
1995.05a
/
pp.656-661
/
1995
Ex-AUC 공정으로 제조된 $UO_2$ 분말에 대하여 ball-milling 시간 (0-4 시간)에 따른 분말의 특성변화 그리고 성형성(성형압력 구간 : 200~400 MPa)을 조사하였다. ex-AUC $UO_2$ 분말에서는 그 입자크기가 비교적 커서 (평균 입자크기 : 28$\mu\textrm{m}$) ball-milling 의 효과가 크게 나타났다. Ball-mill 에 의한 분말입자의 미세화효과는 1 $\mu\textrm{m}$ 보다 큰 크기를 갖는 분말입자에서 주로 나타났다. 또한 ball-milling 에 의해 최대로 감소될 수 있는 분말입자 크기는 약 0.5$\mu\textrm{m}$로 나타났다. Ball-milling 시간에 따라 분말입자 크기는 감소하였으며, 동일한 성형조건하에서 ball-milling 처리된 분말의 성형밀도는 원료분말의 것에 비하여 증가하였다. 이것은 ball-milling 처리에 의해 미분쇄된 분말입자에 기인되는 것으로 나타났다.
타이타늄 제품의 다양성과 시장 확대를 위해 소재 및 공정가격 등을 낮추고자 하는 연구가 다양하게 진행되고 있으며, 그 한 방법으로 타이타늄 분말야금기술이 주목받고 있다. 분말로 제품을 생산할 경우 near-net shape 형태의 제품생산이 가능하기 때문에 압연, 성형, 용접 등의 다단계 공정과 후가공 비용을 최소화할 수 있다. 분말야금으로 제조된 타이타늄 부품의 특징과 아울러 전통적으로 생산하고 있는 타이타늄 분말 제조방법과 분말의 형태, 소결 성형조건 등에 대하여 알아보고, 최근에 개발된 다양한 분말제조 신공정방법과 제조 공정별로 생산되는 분말의 형태와 제조원리 등에 대하여 기술하였다. 경제성을 높이기 위한 다양한 소결과 성형방법에 대하여 고찰함으로써 타이타늄 합금 부품의 활용도를 높이기 위한 연구개발에 대해 기술하였다.
This study was conducted to investigate rheological and sensory characteristics of fish paste prepared with Curcuma longa L. powder (0, 1, 3, 5, 7%). The moisture content of the fish paste ranged from 71.35 to 72.97%. Increasing the amount of Curcuma longa L. powder in the fish paste tended to decrease the pH value and the folding test good score in all samples. Increasing the amount of Curcuma longa L. powder in the fish paste also tended to decrease the lightness (L) in the hunter color value, but to increase the redness (a) and yellowness (b). For the textural characteristics, the addition of Curcuma longa L. powder increased the strength and decreased the springiness. In a sensory evaluation, the addition of 3% Curcuma longa L. powder had the best score in taste and overall preference. Therefore, this results suggest that adding 3% Curcuma longa L. powder would be feasible for making Curcuma longa L. fish paste.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.