• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.48-52
• /
• 1999

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.10a
• /
• pp.37-38
• /
• 1995

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 1998.06a
• /
• pp.375.2-376
• /
• 1998

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.256-261
• /
• 1991

To isolate new antioxidants from twelve edible seaweeds, mixed methanol and chloroform extract of marine algae was fractionated into several subfractions and their antioxidant activities were measured by using AOM and 1, 1-diphenyl-2-picrylhydrazyl (DPPH). Especially the aqueous-methanol soluble fractions of brown and red algae showed a considerable antioxidant effect. Their antioxidant activities were stronger than synthetic antioxidants such as BHA, BHT, under the same concentration. Further fractionation of the aqueous-methanol soluble fractions using silica gel column chromatography yielded five subfractions. Among them methanol fraction exhibited high DPPH quenching activities. Also, it was confirmed to be benzene-derivative substances of two compounds by UV, HPLC, GC/MS analysis. Its each molecular weight was about 181, 238. These results suggested the existence of two effective natural antioxidant compounds in three edible marine algae.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.331-335
• /
• 1998

A design modification was made on the 9-th stage wheel dovetail of a high-intermediate pressure (HIP) turbine rotor for a fossil power plant that necessitates the use of new long-shank buckets for the row. A bucket vibration test is necessary to verify that the new 9-th stage buckets have adequate frequency margin from a nozzle passing frequency when running at speed. A finite element analysis (FEA) has been performed using a commercial S/W to approximately estimate bucket natural frequencies, and thus to help the vibration test. A row of the new buckets has assembled on the HIP rotor for the vibration tests using dynamic balancing facilities. The tests have been done during deceleration run with air excitation. The test results are compared with the calculation using our empirical formula, and show that the modified design meets the frequency-margin requirements.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1900-1904
• /
• 2007

지금까지 수공구조물의 설계와 기존 시설의 안전도를 평가시 수문, 수리 및 경제학적 함수들에서 발생하는 불확실성을 설명하기 위하여 안전율 또는 여유고를 증가시키거나 이들 정보의 양과 질을 증가시켜 데이터베이스를 확장하고 측정오차를 최소화시키며, 전통적인 통계해석을 적용하였다. 공공의 안전을 확보하기 위하여 설계과정에 안전율 또는 여유고가 도입되었으나 이것은 단순히 보다 높은 재현기간의 적용을 의미하며, 수문현상이 가지는 추계학적 특성보다 확정론적인 근거로부터 안전설계 개념이 개발되었다. 수자원 계획시 고려되는 부하와 저항은 확정론적인 고정치가 아니라 시간에 따라 변하고 동적이며, 무작위적이므로 확률 변수로서 고려되어야 한다. 이에 따라 최근 수자원 계획과정에서 불확실성 해석에 의한 위험도 분석 개념이 도입되고 있으며, 특히 이상기후 및 집중호우의 빈발, 급격한 도시화로 인한 유출양상의 변화 등으로 급증하고 있는 훙수피해를 감안할 때 설계빈도의 상향조정과 같은 확정론적인 방법보다는 매개변수 또는 함수의 불확실성을 고려한 위험도 해석의 필요성이 더욱 증대되고 있는 실정이다. 따라서 본 논문에서는 수자원 계획시 입력자료 및 매개변수의 불확실성과 불확실성의 분리를 고려한 홍수량의 산정 및 각 매개변수의 영향을 평가하여 홍수위험도 해석에 있어서 모델 매개변수의 영향 규명과 처리방안을 제시하고자 한다.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.242-248
• /
• 2011

By applying analytic method to the uniform model, the intrinsic and scattering quality factor ($Q_i^{-1}$ and $Q_s^{-1}$) was separated for the southeastern part of Korean Peninsula. The Multiple Lapse Time Window Analysis method was used to fit theoretical values with observations obtained 759 earthquake data. While previous study for the Korean Peninsula showed very low $Q_i^{-1}$ and $Q_s^{-1}$ reflecting inactive seismicity, southeastern Korea exhibited relatively high $Q_i^{-1}$ and $Q_s^{-1}$ values interpreted as higher seismicity than the other region in the peninsula.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.104-111
• /
• 2019

A separate type rotary engine consisting of a compressor and an expander is under development. The engine motoring, compressor pressure, and fuel combustion have been tested with the initial prototype for operability checks of the mechanism. This paper describes an engine cycle analysis method designed specifically for this new-concept engine. The unique operational mechanism of the engine and the thermodynamic properties of each step of air intake, compression, filling of combustion chamber, combustion, expansion and exhaust were analyzed. The cycle efficiencies of this engine according to various engine design parameters as well as the cooling effect of compressed air between the compressor and expander can be easily calculated with this method; further, some case studies are presented in this paper.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.70-79
• /
• 2013

In this work, a steady-state performance modeling and off-design performance analysis of the 2-spool separate-flow turbofan engine named (BR715-56) which is a power plant for the narrow body commercial aircraft is carried out for engine performance behaviors investigation and condition monitoring using a commercial code MATLAB/SIMULINK. Firstly, the engine component maps of fan, high pressure compressor, high pressure turbine and low pressure turbine are generated from similar component maps using the scaling method, and then the off-design performance simulation model is constructed by the mass flow matching and the work matching between components. The model is developed using SIMULINK, which has advantages of easy steady-stare and dynamic modelling and user friendly interface function. It is found that the off-design performance analysis results using the proposed model are well agreed with the performance analysis results by GASTURB at various operating conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.813-823
• /
• 1998

This paper analyzed the circularly polarized conformal microstrip patch antennal using the unsplit anisotropic perfectly matched layer(UAPML) method. Also, this paper are treated effectively the edge and corner parts on the 3 dimensional UAPML. Especially, to analyze microstrip patch antennas with the coaxial feeder line, it was applied to mixed the UAPML with Mur's first order absorbing boundary condition. Therefore this paper suggest the new the method to mix the UAPML with Mur's first order absorbing boundary condition. The results show the time responses of electromagnetics $E_z$ and $H\chi'$, input impedances of coaxial cable and radiation patterns of strip parchs on the single and the array patchs with central frequencies 1.575 GHz, 1.778 GHz and 4.8 GHz in L-band and C-band for mobile communication. The results of this paper shows that its results was compared the Mur's first order abc and mixed the second order dispersion boundary condition(SDBC) with the Mur's first order absorbing boundary condition. In accordance with, the validity of the method is confirmed.