• Korean Journal of Ecology and Environment
• /
• v.34 no.4 s.96
• /
• pp.342-348
• /
• 2001

The present work is to introduce the preliminary experimental results for a primary hydrocyclones process in lake sediment thickening. A few cyclones based on the Rietema standard geometry were prepared. The test particles were sediments from a local lake and waste coal fly ash for a reference test. As a result of the chemical analysis, organic contaminants were abundantly found in smaller particles in overflow. Experimental results showed that the physical characteristics of particles, configuration of the cyclone and operating variables including feed solids concentration and volumetric flow rate could affect the separation efficiency. The limiting feeding velocity for the separation and enrichment of particles was 1.5 m/s, higher separation efficiency, in general, was obtained under the high velocity with the small cyclones.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.29.2-29.2
• /
• 2010

최근 박막형 LED 및 박막형 태양전지등의 기존 마이크로 소자들의 효율향상을 위한 개선으로 나노구조를 이용한 나노소자 제작이 관심을 받고 있다. 이는 가능성으로만 여겨져왔던 나노기술이 기존 박막형 소자에서 포화된 효율상향 접근방식의 한계에 따른 것으로 생각되며, 나아가 나노기술로 제작된 나노소자가 우리 생활을 채우게 될 날이 얼마남지 않은 것을 의미한다. 특히, 디스플레이 소자에서의 나노기술은 더욱 더 중요시 되고 있다. 그로 인해 투명성과 우수한 광전기적 특성을 지닌 산화물 반도체와 그 나노구조 대한 관심이 날로 높아지고 있으며, 그 가운데 산화아연계(ZnO, MgZnO등) 나노구조를 이용한 나노소자 제작이 많이 연구되고 있다. 산화아연은 c축으로 우선 배향성을 가지는 우르짜이트 구조로써, 나노선 성장이 다른 산화물에 비해 용이하고 그 물리적, 화학적 특성이 안정 우수하다. 이러한 산화아연 나노선 제작법 가운데, 유기금속화학기상증착법은 다른 성장법에 비해 결정학적 광학적 특성이 우수하고 성장속도가 빨라 고품질 나노선 성장에 용이한 장비로 각광받고 있다. 하지만 bottom-up 공정을 기반으로 한 나노소자제작에서 몇 가지 문제점을 가지고 있다. 1) 수직형 대면적 성장, 2) 나노선 밀도 조절의 어려움, 3) 기판과의 계면층에 자발적으로 생성되는 계면층의 제거, 4) 고온성장시 precursor의 증발 문제 등이 그것이다. 이러한 문제점을 해결하기 위해 산화아연 나노구조 성장 시, 마그네슘(Mg)을 도입하여, 각 원소의 조성 차이에 따라 기판 표면에 30nm 두께 미만의 상분리층(단결정+비정질층)을 자발적으로 형성시켰다. 성장이 진행됨에 따라, 아연이 rich한 단결정 층에서는 나노선이 선택적으로 성장하게 하였고, 마그네슘이 rich한 비정질 층에서는 성장이 이루어지지 않게 하였다. 따라서 산화아연이 증발되는 온도영역에서 10nm 이하 직경을 가지는 나노선을 자발적으로 계면층 없이 수직 성장하였다. 또한, 표면의 단결정, 비정질의 사이즈를 Mg 유량으로 적절히 조절한 결과, 산화아연계 나노월 구조성장이 가능하였다.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.44-56
• /
• 1998

Separate heat pipe exchanger is considered as the high thermal transportation equipment, because evaporator and condenser are separately positioned in the long distance. Its characteristics are that the working fluid is circulated naturally by the position height of two exchangers. But the operating characteristics are restricted by the temperature of hot and cold fluid, flow pattern and diameter of vapor line, etc. in this study, the vapor pressure and the minimum height of two exchangers are studied about the factors restricting the operating characteristics.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.8
• /
• pp.739-746
• /
• 2010

The purposes of this study are 1) to develop an advanced chamber system within ${\pm}10%$ of air velocity at the particulate matter (PM) collection area, 2) to research theoretical characteristics of PM10 and PM2.5 samplers, 3) to assess the performance characteristics of PM10 and PM2.5 samplers through chamber experiments. The total six one-hour experiments were conducted using the cornstarch with an mass median aerodynamic diameter (MMAD) of $20\;{\mu}m$ and an geometric standard deviation of 2.0 at the two different air velocity conditions of 0.67 m/s and 2.15 m/s in the chamber. The aerosol samplers used in the present study are one APM PM10 and one PM2.5 samplers accordance with the US federal reference methods and specially designed three mini-volume aerosol samplers (two for PM10 and one for PM2.5). The overall results indicate that PM10 and PM2.5 mini-volume samplers need correction factors of 0.25 and 0.39 respectively when APM PM samplers considered as reference samplers and there is significant difference between two mini-volume aerosol samplers when a two-way analysis of variance is tested using the measured PM10 mass concentrations. The PM10 and PM2.5 samplers with the cutpoints and slopes (PM10: $10{\pm}0.5\;{\mu}m$ and $1.5{\pm}0.1$, PM2.5: $2.5{\pm}0.2\;{\mu}m$ and $1.3{\pm}0.03$) theoretically collect the ranges of 86~114% and 64~152% considering the cornstarch characteristics used in this research. Furthermore, the calculated mass concentrations of PM samplers are higher than the ideal mass concentrations when the airborne MMADs for the cornstarch used are smaller than the cutpoints of PM samplers and the PM samplers collected less PM in another case. The chamber experiment also showed that PM10 and PM2.5 samplers had the bigger collection ranges of 37~158% and 55~149% than the theocratical calculated mass concentration ranges and the relatively similar mass concentration ranges were measured at the air velocity of 2.15 m/s comparing with the 0.67 m/s.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.4
• /
• pp.391-395
• /
• 2012

We present a continuous cell separator that achieves density-dependent and size-independent cell separation based on the net force of gravity and buoyancy forces on the cells in dissimilar density fluids. Previous cell separators are, based on the size or dielectrophoretic property of the cells and, are suitable for size-dependent and density-independent cell separation. However, these properties can make it difficult to collect the same types of cells with the same density but with size variations. The present separator, however, is capable of collecting the same types of cells based on the cell density in the fluid. Regardless of cell size, the proposed chip isolates low density cells, (white blood cells, or WBCs) at the upper outlet while obtaining high-density cells (red blood cells, or RBCs) from the lower outlet based on density. Efficiency levels for separation of WBCs and RBCs were $90.9{\pm}9.1%$ and $86.4{\pm}1.99%$, respectively. The present separator therefore has the potential for use in the pretreatment of whole blood.

• Membrane Journal
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2020

In the present study, a biomimetic alumina membrane was fabricated by using selenic acid as an electrolyte to overcome the asymmetry limit of the square pulse anodization process. The prepared membrane has conical channels with a minimum diameter of 10 nm, a maximum diameter of 50 nm, and a length of 5 ㎛. The rectification property was higher than membranes fabricated by sulfuric acid. It showed 2.9 times larger current at +1 V than -1 V. Also, the membrane, which sulfonic acid group was introduced by surface modification, showed 4.2 times larger rectification property at -1 V than +1 V. Theoretical verifications were supported by the numerical analyses of 2D models. The results of the present study present a convenient method to fabricate two type membranes with different rectification properties and are expected to be used to control ion transport.

• Journal of the KSME
• /
• v.30 no.4
• /
• pp.374-381
• /
• 1990

수격해석은 최근의 펌핑 설비의 중요한 선결 과제이고 산업계에서도 자주 문제시되고 있으므로 본 글은 직접 전원 차단으로 인한 수격현상 해석을 수행하는 데 도움이 되도록 여러 문헌을 분 석하여 간략히 정리하였고 그 분석으로부터 다음과 같은 결론을 얻었다. (1) 직경이 다른 관, 분기관 및 병열관 등의 경우는 2절에서와 같이 등가치를 계산함으로써 해석을 단순화한다. (2) 수주 분리시 유체 정지시간, 이동거리 및 보급수량은 3절에 따라 산출하며 이는 수격방지장치 용량 결정의 기초자료가 된다. (3) 실제 펌핑 설비에서 수격현상의 발생은 대부분이 예기치 않는 펌프 전원차단시에 기인된다. 이때의 수격현상 해석을 실용선도에 의해 4.1에 따라 관로내 각 지점의 최고 및 최저 압력을 산출한다. (4) 끝으로 기존 참고문헌에 의한 해석은 여러 가지의 어려운 한계가 존재하므로 추후 수격해석 방안으로서는 특정방정식을 이용한 컴퓨터 수치해석 수행되어야 될 것으로 사료된다.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.215-219
• /
• 1983

Rheological properties of the dough made from milled wheat products of various particle size, i.e., wheat shorts, girls and flour, and their effect on the loaf-volume potential of whole wheat bread were investigated in this study. One Korean wheat variety 'Cho-Kwang' was tested for suitability in whole wheat bread. The percent ash and protein content of the milled wheat products were 2.3% and 13.7% respectively. Ranges of 7.3, 5.6 and 4.8 mixograph peak-height were observed in Fraction 1(wheat flours), Fraction 2 (wheat girts) and Fraction 3(wheat shorts), respectively. Dought stability of Fraction 1 did not decreased appreciably as compared to that of commercial first grade baker's flour. Bread-baking test employing a standard formula showed that the wheat grits (0.2-0.5 mm in diameter) appeared to be the limit beyond which a rapid decrease in loaf-volume potential was noted. Optimum loaf volume and crumb characteristics were obtained in 80% wheat grits/20% wheat flour blend.

• Korean Journal Plant Pathology
• /
• v.3 no.3
• /
• pp.223-235
• /
• 1987

Samples showing yellow mosaic symptom of Lilium spp. with necrotic fleck, stunting, malformation, and colour breaking were collected from lily-growing areas in the southern part of Korea. Two viruses were distinguished under a electron microscope and their host range, serological reaction, stability in sap, type of aphid transmission, and relations with cells and tissues were examined. Broad bean wilt virus (BBWV) was transmitted by sap-inoculation to 23 plant species in 8 families and by the aphid, Myzus persicae. This virus was inactivated after 10 min at 70C, at dilution of $10^{-3}$, and after 6 days at about 20C. Electron microscopic examination of purified preparation showed that the virus is spherical particle of 28nm in diameter. The virus reacted positively with BBWV-antiserum in agar gel diffusion test. In ultrathin sections of BBWV infected tissues, large aggregates or crystalline array of virus particles and vesicular body were found in the cytoplasm, vacuole, and nucleus of mesophyll cells. Cucumber mosaic virus (CMV) was transmitted by sap-inoculation. Electron microscopic examination of its purified preparation showed spherical particles of 30nm in diameter. The virus reacted positively with CMV-Y strain-antiserum in agar gel diffusion test. In ultrathin sections of CMV infected tissues, crystalline array of virus particles were found in the vacuole and a large number 0f virus particles were found in the cytoplasm and the plasmodesmata of mesophyll cells. When each of these viruses was retransmitted to Lilium tigrinum. L. concolor, and L. auratum, BBWV induced slight symtoms and colour breaking, but CMV induced yellowing mosaic or necrotic fleck.

• Korean journal of applied entomology
• /
• v.17 no.3 s.36
• /
• pp.131-138
• /
• 1978

A virus named Cymbidium mild mosaic virus(Cy MMV), was mechanically transmitted to Chenopodium amaranticolor from the leaves of Cymbidium with mild mosaic symptoms. The virus was cultured in C. amaranticolor, in which it produced local chlorotic and ring spots, followed by systemic vein clearing with distortion. CyMMV infected 7 out of 35 species of plants. In C. amaranticolor juice infectivity was lost by heating at $90^{\circ}C$ for 10 miuntes, and by aging at$20^{\circ}C$ for 60 days, and by diluting at $10^{-6}$ when bioassayed on C. amaranticolor. CyMMV was not transmitted by Myzus persicae. The virus was purified after clarification of homogenized C. amaranticolor leaf tissues with chloroform, by differential centrifugation followed by sucrose density gradient centrifugation. Electron microscopic examination of purified preparation showed spherical particles of 28nm in diameter. The UV absorption spectrum of purified preparation was typical of u nucleoprotein (max. at 261nm. min. at 243nm), and showed 260/280=1.72 and max/min=1.26. The value of the sedimentation coefficient of the virus was S20.w=126. In gel-diffusion tests, CyMMV antiserum reacted with CarMV, but not with any of four other viruses (BBWV, CRSV, CMV, TBRV) having similar particles and properties in vitro. In ultra-thin sections of CyMMV infected tissues, a large number of virus particles were found in the cytoplasm of mesophyll cells and in xylem vessels.