• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.62-68
• /
• 1993

During compression molding of fibre-reinforced thermoplastics, the two main problems such as the fibre-matrix separation and the fibre orientation are produced by the flow state. As the molded product tends to be nonhomogeneous and anisotropic due to the separation and the orientation, it is necessary to clarify these in relation to the molding process variables and the fibre structure (fibre entanglement). If the entanglement of fibre structure is strong, the separation increases and the orientation is not easily aligned. Namely, these are inseparably related to each other. The correlation between the separation and the orientation have to be clarified for designing the fibre structure. In this paper, the degree of nonhomogeneity which is a measure of the separation is obtained using one-dimensional rectangular shaped part compression molding. And the orientation function is defined and measured by the image processing using soft X-rayed photograph and image scanner. Correlation between the degree of nonhomogeneity and the orientation function is discussed.

• Journal of the KSME
• /
• v.32 no.1
• /
• pp.39-45
• /
• 1992

고분자 복합재료를 성형할 때 발생하는 두가지 문제점은 섬괘의 분리와 배향이다. 이 분리 및 배향은 성형조건, 섬괘의 구조 등에 의해서 영향을 받고 이 분리 . 배향을 성형 조건, 재료 등과 관련시켜서 명확히 하는 것은 복합재료의 설계, 복합재료의 부품설계, 신복합재료의 개발에 매우 중요하다. 또 이 분리와 배향은 별개의 것이 아니라 불가분의 관계가 있으며, 분리를 표현하는 불균질도라 배향의 정도를 나타내는 배향함수의 상관관계로부터 복합재료의 설계에 지침을 줄 수 있다고 생각된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1106-1114
• /
• 1993

A composite material is composed of a reinforcement and a matrix, which determine mechanical characteristics of the molded part. There is no doubt that the properties of a composite material depend not only on the characteristics of the matrix but also on the structure of glass fiber mat and a fiber type of reinforcement. Therefore it is very important to study the composites of reinforcement and the matrix, and to control the fiber type in the process of molding of composite materials. In this study, the specimen was made of a glass fiber mat of 6-7mm thickness by scattering it in the air after cutting the glass fiber mat with needle punching makes change according to the type of needle and the number of times of stretching. First the sheet was made by means of a hot-press after accumulating a matrix and a glass fiber according to each mat structure of glass fiber. It was heated the manufactured sheet with the dry oven and molded it a secondary high temperature compression by a 30 ton oilhydraulic press. A definition of a correlation coefficient is showed up during this period and find it out with the relation of the fiber-matrix separation and the fiber orientation. We studied effects of the glass fiber mat structures on the correlation coefficient.

• Composites Research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2000

During the compression molding process of the continuous fiber-reinforced polymeric composites, two main problems such as fiber-matrix separation and fiber orientation are produced by the difference of flow velocity. Molded parts are lead to be nonhomogeneous and anisotropic. As the mechanical property of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding condition. If the fiber mat structure is changed by the increment of needling, the separation decreases and after compression molding the orientation is easily aligned. As it were, the compression moldability is good. But the defects as tears, thin thickness are produced in the products. Therefore, it is important to clarify the moldability in relation to the usage of products and the expenses of produce on the actual process. Therefore we must make the measurement methods that can define the moldability of products. In this research, the effects of the fiber mat structure(NP = 0, 5, 10, 25, 50 punches/$cm^2$) and the mold geometry($r_p$ = 1, 25, 50 mm) on the moldability of products were discussed. We investigated the case of one-dimensional flow in order to obtain the degree of nonhomogeneity and the fiber orientation function. In result, we could gain the correlation coefficient of the continuous fiber-reinforced polymeric composites. Also we experimented on the cup-type compression molding which was appeared the wrinkle on the flange part by the complex stress condition in order to gain the degree of nonhomogeneity and area ratio. In result, the moldability of products was expressed as the correlation coefficient and area ratio.