• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1709-1718
• /
• 2021

The waveform data of the Airborne Bathymetric LiDAR (ABL; LiDAR: Light Detection And Ranging) system provides data with improved accuracy, resolution, and reliability compared to the discrete-return data, and increases the user's control over data processing. Furthermore, we are able to extract additional information about the return signal. Waveform decomposition is a technique that separates each echo from the received waveform with a mixture of water surface and seabed reflections, waterbody backscattering, and various noises. In this study, a new waveform decomposition technique based on a Gaussian model was developed to improve the point extraction performance from the ABL waveform data. In the existing waveform decomposition techniques, the number of decomposed echoes and decomposition performance depend on the peak detection results because they use waveform peaks as initial values. However, in the study, we improved the approximation accuracy of the decomposition model by adding the estimated potential peak candidates to the initial peaks. As a result of an experiment using waveform data obtained from the East Coast from the Seahawk system, the precision of the decomposition model was improved by about 37% based on evaluating RMSE compared to the Gaussian decomposition method.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.26-30
• /
• 2008

Normal soybean seed contains three lipoxygenase isozymes called L-1, L-2, and L-3, respectively, which are responsible for the generation of undesirable grassy-beany flavors. Simple and effective methods for the detection of lipoxygenase isozymes were developed in soybean seeds. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) has been tried in separating these isozymes. It was done effectively on 7.5% separating gel and 4.5% stacking gel. However, no reliable method has been developed specifically for separating L-3, L-13 and L-23. Visual judging methods were based on the bleaching activities of lipoxygenase in contact with methylene blue and ${\beta}$-carotene. Sodium linoleate bleaching method was adopted to determine L-1 and L-2. Carotene bleaching and spectrophotometric methods were used to determine L-3. These systems were very rapid within one minute, furthermore only required a small piece of cotyledon (below 10 mg) and the other part could be used for generation advance after analysis. It was demonstrated that 200 seed samples could be analyzed per day by one laboratory assistant. The combination of visual judging methods and electrophoresis is suitable for breeding programs. It took 6.5 hours for analysis of 100 seed samples by one person.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.109-118
• /
• 2019

Cloud-aerosol interactions are considered to be one of the most important forcing mechanisms in the climate system. However, there is considerable disagreement on the magnitude and even on the sign of how aerosol perturbations affect cloud fraction and lifetime. Furthermore, aerosol effects on clouds and precipitation are not readily separable from the effects of meteorology. This review paper summarizes the study of precipitation susceptibility $S_o$, which qualifies how aerosol perturbations alter the magnitude of the precipitation rate (R) while minimizing the effects of macrophysical factors such as cloud depth (H) and liquid water path (LWP). The analysis shows that the precipitation susceptibility $S_o$ for the warm marine boundary layer clouds is insensitive to aerosol perturbations at low LWP (equivalently low H). However, R decreases as aerosols increase at intermediate LWP. This is because aerosols act as cloud seed and produce numerous small-sized particles, which impede the collision and coalescence process that leads to precipitation. At high LWP, $S_o$ decreases with increasing LWP as there are enough water contents in the clouds. The LWP or H dependent $S_o$ behavior differs depending on the predominant cloud physics processes in the clouds.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.59-64
• /
• 2018

As part of measures to reduce fine dust, the government is promoting a project to convert the fuel of Yard Tractors(YT, tractors operated at ports), from diesel to LNG (Liquefied Natural Gas). While a port having a small number of yard tractors, it is not proper to construct a stationary LNG fueling station and supply LNG to YT due to a problem of BOG (Boil off gas) generation. Therefore, it is necessary to make a regulation and a standard on mobile LNG YT refueling station installation and inspection as an alternative. In this study, we have investigated domestic and foreign mobile LNG refueling cases and refueling standards, including the USA and Europe. In addition, we have suggested the risk reduction method according to the cause after investigation of the cause of LNG accidents. And last, based on the proposed risk reduction measures, we have proposed an amendment to the Regulation of the Urban Gas Business Law in Korea. The proposed mobile LNG YT refueling amendment of the Regulation includes ; maintenance of the safety distance from the protection facility, installation of an interlock device to prevent refueling in places other than the authorized place, installation of the identification system through biometrics, separation of the tank lorry and tow vehicle before refueling, checking the wheel fixed status of tank lorry before refueling, construction of the impounding area, safety measures before, during and after refueling, etc. The safety standards proposed in this study could be used as a reference in establishing standards for mobile LNG vehicle refueling in the near future.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.6
• /
• pp.127-138
• /
• 2019

The data response speed is a critical issue of cloud services because it directly related to the user experience. As such, the in-memory database is widely adopted in many cloud-based applications for achieving fast data response. However, the current implementation of the in-memory database is mostly based on the linked list-based hash table which cannot guarantee the constant data response time. Thus, cuckoo hashing was introduced as an alternative solution, however, there is a disadvantage that only half of the allocated memory can be used for storing data. Subsequently, bucketized cuckoo hashing (BCH) improved the performance of cuckoo hashing in terms of memory efficiency but still cannot overcome the limitation that the insert overhead. In this paper, we propose a data management solution called Wall Cuckoo which aims to improve not only the insert performance but also lookup performance of BCH. The key idea of Wall Cuckoo is that separates the data among a bucket according to the different hash function be used. By doing so, the searching range among the bucket is narrowed down, thereby the amount of slot accesses required for the data lookup can be reduced. At the same time, the insert performance will be improved because the insert is following up the operation of the lookup. According to analysis, the expected value of slot access required for our Wall Cuckoo is less than that of BCH. We conducted experiments to show that Wall Cuckoo outperforms the BCH and Sorting Cuckoo in terms of the amount of slot access in lookup and insert operations and in different load factor (i.e., 10%-95%).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.229-235
• /
• 2019

The implementation of an in-band full-duplex wireless communication system is demonstrated in this study. In the analog/RF domain, the self-interference(SI) signal is reduced using a separate antenna for the transmitter and receiver paths, and most of the SI signal is canceled in the digital domain. A software defined radio(SDR) is used to implement the in-band full-duplex wireless communication system. The USRP X310 device uses transmitting and receiving antennas. By adjusting the gain of the transmitting and receiving ends of the SDR device, the magnitude of the SI signal entering the receiving antenna, and the size of the received signal from the outside, are both set to -64 dB. To verify the in-band full-duplex wireless communication performance, the source data is image and orthogonal frequency-division multiplexing is used for modulation. A WiFi standard frame with a carrier frequency of 2.67 GHz and bandwidth of 20 MHz is used. In the received signal, the SI signal is canceled by digital signal processing and the SI signal is attenuated by up to 34 dB. OFDM demodulation was impossible when the SI signal was not removed. However, the bit error rate is reduced to $2.63{\times}10^{-5}$ when the SI signal is attenuated by 34 dB, and no error is detected in the 100 Mbit data output as a result of passing through the Viterbi decoder.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.491-500
• /
• 2018

Due to changes in the distribution industry, inner harbors have been on a sharp decline in the recent past. However, through the application of the right development plans, such harbors can be revitalized into vibrant urban areas again. The importance of inner harbors has been recognized by the relevant authorities in Korea which are now pushing forward with redevelopment plans for its inner harbors. This study proposes a new approach to redevelopment plans based on the recognition that inner harbors have unique characteristics involving both inland areas and the ocean. In the study, representative inner harbors were selected and analyzed comparatively according to two distinct concepts of location: the Gateway Concept and the Central Place Concept. Based on these concepts, the conditions of the inner harbors were examined. Their location can be typed, and development directions were proposed according to their types and conditions. However, difficult points such as isolation and separation between an urban district and the harbor area, can be obstructions to their potential revival. An inner harbor needs to be considered as an intermediary, connecting place between the ocean and the city, not as another ordinary development area. In addition, a redevelopment plan should be accompanied by a strategic viewpoint to make the most of this feature.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.418-426
• /
• 2019

Recently, many studies on vital sign detection using a radar sensor related to Internet of Things(IoT) smart home systems have been conducted. Because vital signs such as respiration and cardiac rates generally cause micro-motions in the chest or back, the phase of the received echo signal from a target fluctuates according to the micro-motion. Therefore, vital signs are usually detected via spectral analysis of the phase. However, the probability of false alarms in cardiac rate detection increases as a result of various problems in the measurement environment, such as very weak phase fluctuations caused by the cardiac rate. Therefore, this study analyzes the difficulties of vital sign detection and proposes an efficient vital sign detection algorithm consisting of four main stages: 1) phase decomposition, 2) phase differentiation and filtering, 3) vital sign detection, and 4) reduction of the probability of false alarm. Experimental results using impulse-radio ultra-wideband radar show that the proposed algorithm is very efficient in terms of computation and accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.648-655
• /
• 2019

This paper proposes the differential development of a Taekwondo electronic body protector. For this development, the most suitable sensor system was selected after analyzing and testing various sensor methods (magnetic sensors, electric capacity sensors, contact switch sensors, and piezo-film sensors) that could be applied in the electronic body protector, the selected sensors were distributed to the body and feet to make a more precise hit score, unlike the existing system in which all sensors are centralized on the body. Furthermore, it aims to illuminate using a lightweight film-type piezoelectric sensor on the body protector. In the case of an existing electronic body protector, all sensors and network device were concentrated on the body protector, so users need to purchase a set if they want it. On the other hand, the proposed system cloud can be used individually using a smart scoring WEP program. The effects of decreasing weight by up to 20% were compared with those of the existing system. Setting up a test facility is very difficult, so more study will be needed to analyze the effects of a hit.

• Korean Journal of Ichthyology
• /
• v.31 no.1
• /
• pp.30-38
• /
• 2019

Egg development and early life history of the Korean endemic sand spine loach, Cobitis nalbanti, were investigated in the present study. Adult fish were sampled using spoon nets at the Yeongsan River in Seongam-ri, Bukha-myeon, Jangseong-gun, Jeollanam-do, Korea, June 2011. Eggs were obtained after injecting Ovarprim into females. Eggs were then artificially fertilized using the dry method in the laboratory. Mature eggs were transparent and slightly adhesive with light yellowish coloring, measured $0.99{\pm}0.03mm$ ($mean{\pm}SD$) in diameter. And number of spawned eggs were $1,527{\pm}410$ per individual. Hatching (50%) of the embryo occurred 52 hours after fertilization a water temperature of $25^{\circ}C$, and the average newly hatched larvae size was about $4.2{\pm}0.22mm$ in total length. At fifth day after hatching, the larval total length reached $6.0{\pm}0.34mm$ on average and their yolk sac had been completely absorbed. At fifteen day after hatching, larva entered the juvenile stage and reached $10.8{\pm}0.45mm$ in total length. At 100th day after hatching, the formation of Gambetta's zone of four dotted line was complete and juveniles were similar in general appearance to adults, and they averaged $41.1{\pm}2.95mm$ in total length.