• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.90.1-90.1
• /
• 2011

연료전지 분리판은 연료, 공기, 수분이 흐를 수 있는 채널들이 포함되어 있으며, 전지들에 의해서 생산되는 전류를 흐르게 할 수 있는 전기전도성을 가져야 할 필요가 있다. 일반적인 금속판들은 연료전지 스택 내의 산성 분위기에 존재해야 하기 때문에 표면 부식이 쉽게 발생한다. 그라핀(graphene)은 우수한 전기전도성을 가지고 있을뿐만 아니라 물리화학적 내식성 및 내구성을 가지고 있어 연료전지 분리판으로서 응용이 가능할 것으로 판단된다. 본 연구에서는 일반적으로 널리 사용하고 있는 스테인리스강(stainless steel)을 모재로 사용하였으며, 그라핀을 전기분무법(electro spray coating)으로 코팅하여 스테인리스강의 내식성 및 전기전도성을 동시에 향상시키고자 하였다. 그라핀은 에탄올을 용매로 사용하여 분산하였으며, 분산제로 소량의 다이페닐다이에톡시실란(diphenyldiethoxysilane)을 첨가하여 코팅용액을 제작하였다. 코팅공정은 15kV 전압을 가하여 1시간동안 코팅을 진해하였으며, 그라핀-스테인리스강 모재의 미세구조를 전자현미경과 광학현미경을 통하여 관찰하였다. 또한 X-선 회절분석법을 이용하여 그라핀의 결정구조를 분석하였다. 한편 스택의 내부와 유사한 산화성 분위를 모사하기 위해 $80^{\circ}C$의 0.1N $H_2SO_4+2ppm\;F^-$ 용액에서 내식성 실험을 수행하였고, 면간접촉저항도 측정하였다. 그라핀이 코팅된 스테인리스강 시편은 고분자전해질 연료전지 분리판의 요구조건을 만족하였으며, 연료전지 분리판으로서의 적용가능성을 확인하였다.

• Korean Journal of Environment and Ecology
• /
• v.9 no.2
• /
• pp.133-146
• /
• 1996

This study was conducted to analyse plant community structure by the altityed and slope in Tongdaesan area, Odaesan National Park. Sixty-three plots(each plots size was 100m$^{2}$) were set up and PWINSPAN and DCA method were used for vegetational structure analysis. Division of community was cleared altitude than part of slope With increasing elevation the importance values of Quercus mongolica, Tilia amurensis increased, while those of Fraxinus mandshurica, Betula schmidtii, Cornus controversa decreased. Survey plots were divided into 6 groups by the TWINSPAN and DCA method. The divided groups are T. amurensis community(I), Q. mongolica community(II) of upper part of slope of east and west, Q. mongolica-T. amurensis community(III) of middle part of slope, Q. mongolica-F. mandshurica community(IV), Pinus densiflora-B. schmidtii-Carpinus laxiflora community(V) of low elevation of east, F. mandshurica-C. controversa community(VI)of low elevation of west. Also, vegetational change were showed slope of east and west in Tongdaesan except top area for the last twenty yeras.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.878-888
• /
• 1994

In order to investigate the fracture behavior of ABS terpolymer under the tension and impact load, varing the content of rubber, molecular weight of SAN, content and kinds of lubricant, tension speed, the mechanical properties were measured and SEM pictures of fracture area were taken. Under the tension, the tensile strength increased as rubber content and lubricant content decreased, while molecular weight and tension speed increased. The deformation of area near fracture site did not occur as rubber content, tension speed and molecular weight decreased and liquid lubricant was used. And in the shape of fracture seemed phase seperation. Under the impact load, the notched izod impact strength increased as rubber content, molecular weight, ambient temperature and lubricant content increased. In the SEM picture, the strength was high white the fracture surface was small.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1040-1047
• /
• 2012

This paper presents a fault diagnosis algorithm of control surfaces of small fixed-wing aircraft to reduce maintenance cost or to improve repair efficiency by estimation of fault occurrence or part replacement periods. The proposed fault diagnosis algorithm consists of ANPSD (Averaged Normalized Power Spectral Density), PCA (Principle Component Analysis), and GC (Geometric Classifier). ANPSD is used for frequency-domain vibration testing. PCA has advantage to extract compressed information from ANPSD. GC has good properties to minimize errors of the fault detection and isolation. The algorithm was verified by the accelerometer measurements of the scaled normal and faulty ailerons and the test results show that the algorithm is suitable for the detection and isolation of the control surface faults. This paper also proposes solutions for some kind of implementation problems.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1264-1269
• /
• 2014

This study investigated the effects of rice starch addition, including native, acetylated, and hydroxypropy-lated rice starch, on the quality characteristics of instant fried noodles. Compared to 100% wheat flour (control), flours containing acetylated or hydroxypropylated rice starch showed reduced initial pasting temperatures as well as peak and breakdown viscosities as determined using a Rapid Visco-Analyzer (RVA). The addition of acetylated and hydroxylated rice starch as well as native rice starch increased cooked weight, volume, and water absorption of the fried noodles compared to control noodles. The addition of native rice starch tended to increase softness of noodles, whereas addition of acetylated or hydroxypropylated rice starch significantly lowered hardness, gumminess, and chewiness values. The results of the sensory evaluation indicate that noodles containing rice starch showed improved sensory characteristics such as color, appearance, flavor, taste, and texture. Especially, acetylated rice starch could be used to improve eating quality of instant fried noodles.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.92-100
• /
• 2005

An optimal fuel manifold is suggested to improve the cooling performance of an injector face plate. The cooling performance at the center area of the injector face plate is to be augmented while the spatial injection uniformity is maintained. The comparison of the cooling performance of f candidates gives the conclusion that the dividing plate from 2-3 injector .ow to 9-10 injector. row is an optimal. The maximum face plate temperature decreases by 27$\%$ while the injection uniformity is close to that of the original design. The pressure drop in the fuel manifold of the optimal design is also same as the original design.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.159-167
• /
• 2010

The purpose of this study was to identify patterns of caries in the dentition of preschool children using cluster analysis and multidimensional scaling. 815 preschool children aged 36-71 months old were examined for caries experience. The first four clusters in the cluster analysis were (1) molars, (2) upper incisors, (3) lower 1st molars, and (4) upper 1st molars in teeth, (1) occlusal surfaces of lower molars and upper 2nd molars, (2) mesial surfaces of upper central incisors, (3) occlusal surfaces of lower 1st molars, and (4) separation between occlusal surfaces of upper and lower 2nd molars in tooth surfaces, and (1) proximal surfaces of upper anterior teeth, (2) occlusal surfaces of lower molars, (3) buccolingual surfaces of upper anterior teeth and (4) buccolingual, proximal, and occlusal surfaces of upper molars and buccolingual and proximal surfaces of lower molars in tooth surfaces groups. In the multidimensional scaling analysis, teeth could be divided into lower 1st molars, upper 1st molars, upper central incisors, upper lateral incisors, lower 2nd molars, upper 2nd molars, and the rest(canines, lower incisors), tooth surfaces could be divided into occlusal surfaces of lower molars, mesial surfaces of upper central incisors, occlusal surfaces of upper molars, and the rest, and tooth surface groups could be divided into proximal surfaces of upper anterior teeth, buccolingual surfaces of upper anteiror teeth, occlusal surfaces of lower molars, and the rest in the order of the distance from others. In the cluster analysis and the multidimensional scaling analysis, caries patterns were different according to the age.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.91-99
• /
• 2004

Purpose : For the head and neck radiotherapy, abutting photon field with electron field is frequently used for the irradiation of posterior neck when tolerable dose on spinal cord has been reached. Materials and methods : Using 6 MV X-ray and 9 MeV electron beams of Clinac1800(Varian, USA) linear accelerator, we performed film dosimetry by the X-OMAT V film of Kodak in solid water phantom according to depths(0 cm, 1.5 cm, 3 cm, 5 cm). 6 MV X-ray and 9 MeV electron(1Gy) were exposes to 8cm depth and surface(SSD 100cm) of phantom. The dose distribution to the junction line between photon($10cm{\times}10cm$ field with block) and electron($15cm{\times}15cm$ field with block) fields was also measured according to depths(0 cm, 0.5 1.5 cm, 3 cm, 5 cm). Results : At the junction line between photon and electron fields, the hot spot was developed on the side of the photon field and a cold spot was developed on that of the electron field. The hot spot in the photon side was developed at depth 1.5 cm with 7 mm width. The maximum dose of hot spot was increased to $6\%$ of reference doses in the photon field. The cold spot in the electron side was developed at all measured depths(0.5 cm-3 cm) with 1-12.5 mm widths. The decreased dose in the cold spot was $4.5-30\%$ of reference dose in the electron field. Conclusion : When we make use of abutting photon field with electron field for the treatment of head and neck cancer we should consider the hot and cold dose area in the junction of photon and electron field according to location of tumor.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.139-145
• /
• 2011

Parthenocissus tricuspidata is an epiphyte that lacks a main axial stem, but develops adhesive disks along the stem for climbing support. In this study, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were utilized to examine the brick wall surface and the adhesive disks of P. tricuspidata that attached to the surface successfully. The study was mainly focused the outermost layers of both structures before and after adhesion to find out whether there has been some structural and/or physical interactions between the two. The adhesive disks adhered firmly to the brick wall by secreting adhesive materials that help them for a tight attachment to the surface. The rough wall surface appeared facilitating better attachment of the adhesive disks by infiltrating the materials into those spaces leading to some degree of interactions at the interface. EDS analysis on the outermost layers of the adhesive disks that were separated from the substrates was also consistent with the SEM data on the interaction between the adhesive disks and the substrate surface. EDS analysis of the brick wall surface and the adhesive disks demonstrated similar elements of O, Si, Fe, Al, K, Mg, and Na in their components.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.284-284
• /
• 2016

최근 기후변화의 영향으로 재해의 빈도와 피해의 규모는 점점 커지고, 예측의 불확실성 또한 증가하고 있다. 이에 따라 기후변화와 관련된 자연재해에 대처하기 위한 다양한 연구들이 수행되어 왔지만, 대부분의 기후변화 관련 연구는 미래 강우량과 해수면 상승을 분리하여 각각의 인자들에 따른 재난영향을 평가하였다. 그러나 연안지역에서는 강우 증가로 인해 발생하는 재해와 해수면 상승으로 인한 재해 등 두 개 이상의 재해가 복합적으로 작용할 수 있으므로 이를 동시에 고려한 연구가 필요하다. 따라서 본 연구에서는 해수면의 영향을 직접적으로 받는 태화강 유역을 대상유역으로 선정 하였고, 기후변화에 따른 강우의 증가와 해수면 상승이 연안지역에 미치는 영향을 평가하였다. 이를 위해 유역의 토지피복도, 수치고도자료, 토양도, 해당 유역의 단면 등을 이용하여 수리 수문모형을 구성하였다. 기후변화에 따른 강우 증가량을 고려하여 시나리오별 유출량을 산정하였고, 산정된 유출량 및 기점수위를 경계조건으로 입력하여 기후변화 시나리오에 따른 해수면 상승을 고려한 홍수위를 산정하였다. 이를 통하여 산정된 홍수위와 하천설계기준 해설에서 제시하고 있는 제방 여유고를 비교 검토하였다. 결과적으로, 목표기간별로 현재상태보다 최대 25.5%까지 첨두유출량이 증가하였고, 해수면 상승으로 인한 홍수위 변화는 하구부근에서 기점을 기준으로 약 7.1km까지 영향을 미치는 것으로 확인되었다. 또한 여유고의 부족 구간을 검토한 결과, 전체 구간 40.17km 중 약 31.7km인 79.5%가 여유고를 만족하지 못하였고, 해수면 상승을 고려하지 않았을 경우에는 여유고를 만족하지 못하는 구간이 최대 3.8% 감소하였다. 연안지역의 기후변화로 인한 미래 강우량 증가와 해수면 상승을 동시에 고려한다면, 심각한 홍수 피해가 생길 것으로 예상된다. 따라서 이를 고려한 치수대책이 시급할 것으로 판단된다.