• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.531-542
• /
• 2002

As most of metadata have been handled on restricted applications, we need a same metadata in order to represent a same video data. However, these metadata make problems that the same video data should be supported by the same metadata. Therefore, in this paper, we extend the Dublin core elements to support the metadata which can solve the problems. The proposed video data representation is managed by the extended metadata of Doblin core model, by using the information of structure, content and manipulation of video data. The thirteen temporal relationship operators are reduced to the six temporal relationship operators by using a dummy shot temporal transformation relationship. The reduced six temporal relationship operators through excluding reverse temporal relationship not only maintain a consistency of representation between a metadata and a video data, but also transform n-ary temporal relationship to binary relationship on shots. We show that the proposed metadata model can be applied to representing and retrieving on various applications as equivalent as the same structure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.880-884
• /
• 2009

여름철 강우시 저수지로 유입하는 고탁도의 하천수는 저수지 주변 수체에 비해 낮은 수온과 높은 부유물질 농도(SS)로 인해 상대적으로 높은 밀도를 가지며, 저수지 내에서 동일 밀도층을 따라 분포하며 밀도류를 형성하게 된다. 탁수는 대부분 장기간 저수지에 체류하며 수질과 수생태계에 큰 영향을 주게 된다. 따라서 저수지로 유입한 탁수의 밀도류 거동특성을 파악하는 것은 저수지 운영, 수질관리 및 수생태계 보호를 위한 관리대책 수립에 있어서 중요한 요소이다. 본 연구의 목적은 횡방향 평균 2차원 수치모델을 이용하여 초기수위별 다양한 유량규모에서 소양호로 유입하는 밀도류의 거동특성(유입경계지점 수심($h_0$), 침강점 수심($d_p$)과 거리($X_p$), 분리점 수심($d_s$), 중층류 관입두께($h_i$), 댐 축 도달시간($t_a$), 희석율(${\beta}$))을 분석하여 저수지 수질관리를 위한 의사결정지원 기초정보를 제공하는데 있다. 밀도류의 거동분석을 위해 사용된 유량조건은 그동안 소양호에서 발생한 홍수크기를 바탕으로 7개의 등급으로 나누었으며, 각각의 유량조건별 수문곡선은 2007년 수문사상 중 7월 30일부터 8월 30일까지의 수문사상을 바탕으로 수정가우시안 공식을 사용하여 산정하였다. 탁수 거동 특성의 모의는 서로 다른 초기 수위 및 유량조건하에서의 탁수거동을 나타냈고, SS농도 25 mg/L 이상을 기준으로 하여 탁수층의 $d_p$, $X_p$, $d_s$, $h_i$, $t_a$, ${\beta}$를 산정하였다. 일반적으로 유량규모가 커질수록 $d_p$와 $d_s$는 증가하였고, $X_p$는 댐 축으로부터 가까워짐이 확인되었으나, 동일 유량규모에 대해 초기 수위가 증가함에 따라 $X_p$는 대체로 댐으로부터 멀어졌다. $h_i$는 유량규모가 증가함에 따라 완만하게 증가하는 경향을 보였고, $t_a$는 초기수위가 EL. 165 m일 때 유량이 2,000 CMS 미만인 경우 댐 앞까지 도달하지 못하는 것으로 나타났으며, 나머지 수위조건에서는 유량이 3,000 CMS 미만인 경우 댐 앞까지 도달하지 못하는 것으로 나타났다. 유량 규모에 따라 $X_p$가 0 km인 지점과 19 km인 지점에서의 ${\beta}$ 값을 산정한 결과 일반적으로 유량규모가 커질수록 유입수의 희석효과는 작아지며 초기수위가 커질수록 증가하는 경향을 나타냈다. 연구 결과는 탁수 발생 초기 저수지 운영 실무자들이 유량규모 및 초기 수위조건에 따른 밀도류의 거동특성을 신속히 예측하는 목적으로 사용될 수 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.579-585
• /
• 2016

3D laser scanning can be used for scanning the freeform surface and building a model from which the measurements could be taken, in order to solve the difficulty with getting access to the exact freeform shape and position data of the complex building envelope. The shape making process using 3D scanning is as follows: point cloud, mesh surface segmentation, NURBS(Non-Uniform Rational B-spline) surface generation, and parametric solid model generation. In this research, we review previous studies, reverse engineering notion, importance of reverse engineering usage for freeform envelope, and previous cases in order to identify the detail reverse engineering process for prefabrication and construction of freeform panels using 3D laser scanning technology. Therefore, the purpose of this research is to present a basic information which should be considered during design and construction phase and improve quality and constructibility of freeform building by analyzing the reverse engineering process and case study for prefabrication and construction of freeform panels using 3D laser scanning. The research results will enable 3D shape engineering and design parameterization using reverse engineering to be used in various construction projects.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.260-268
• /
• 1995

Ischemia results when the decrease in tissue perfusion exceeds the tissues ability to increase an oxygen extraction from the blood. Brain edema has been defined as an abnormal accumulation of fluid within brain parenchyma associated with a volumetric enlargement of the brain tissue. In most instances, the labelling of edema as vasogenic or cytotoxic is only relative. For cerebral protection, there were many possible techniques which could increase or maintain cerebral perfusion and reduce cerebral metabolic demand for oxygen. This study was carried out the effect of mild brain hypothermia which was induced by infusion with cold saline into the carotid artery, during brief episodes of transient global ischemia on postischemic brain edema in rabbit. Eight rabbits were anesthetized with halothane and mechanically ventilated with oxygen. For isolated cerebral perfusion, polyethylene catheter was inserted left carotid artery for infusion of cold saline, external carotid artery was ligated, vertebral arteries were cautherized, right carotid artery was snared for ischemia and femoral artery and vein were also canulated for monitoring and drug treatment. At 3 hours After transient global ischemia, specific gravity of cerebral cortex and hippocampus was compared with no-perfusion group , perfusion with cold saline group and normal group. There was no significant differences in physiologic variables among the groups before transient global ischemia. But during transient global ischemia, brain temperature of perfusion group was decreased when compared to no perfusion group. Specific gravity of cerebral cortex and hippocampus of no-perfusion group and perfusion group was statistically significant when compared to normal group (p<0.01). The results of this study suggested that mild brain hypothermia with intracarotid cold saline infusion during brief episodes of transient global ischemia had decreased postischemic brain edema in rabbit.

• Korean Journal of Microbiology
• /
• v.37 no.4
• /
• pp.284-288
• /
• 2001

Respiratory viruses are one of the most infectious agent in human. Six different respiratory tract viruses were detected from Busan while working on the preventive surveillance in 1997-2000. The isolation rate from suspected specimens were 8.4%. Influenza virus A, B type, parainfluenza virus, adenovirus, mumps virus, and measles virus were examined from throat swabs, serum, and secretions of patients. Influenza A/Sydney/05/97(H3N2)-like, A/Johanesburg/33/94(H3N2)-like, A/Beijing/262/95(H1N1)-like and Influenza B/Beijing/262/95-like, B/Harbin/07/94-like, B/Guangdong/08/93-like were found. Adenovirus serotype 1, 2, 3 and 5 were detected, antibody of mumps both IgM and IgG were shown and outbreaks of measles were confirmed. Different antigenic types of influenza virus were detected every year, one outbreak of parainfluenza in 1999, mumps outbreak in 1999 and 2000, and incidence of measles in 2000 were noticeable. Monthly outbreaks were November through following March with influenza virus, January through June with adenovirus, February through May and December with mumps, April through August and November, December with measles, respectively. The size of isolated viruses were 130 nm with influenza virus B type, non-enveloped, icosahedron with 70 nm with adenovirus, 170 nm with mumps virus and 180 nm with parainfluenza virus in diameter, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.15-22
• /
• 2000

There are lots of industrial machines of which functions are achieved by operation of multi-phase fluids. Some of them take advantage of the characteristics of counter-current two-phase flow The maximum flow rates of gas and liquid phases which flow in opposite-directions (counter-current flow) are limited by a phenomenon known as a Counter-Current Flow Limitation (CCFL or Flooding) The mass and momentum conservation equations for each Phase were established to build a first-order hyperbolic partial derivative equations system. A new CCFL model is developed based on the characteristic equation of the hyperbolic PDE system. The present model has its applicationto the case in which a non-uniform flow is developed around a square or sharp-edged entrance of liquid phase. The model is able to he used to Predict the operating-limit of components in which mass and heat transfer are taking place between liquid and gas phases.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.261-267
• /
• 2018

In the present study, we assessed the effecs of fruit and vegetable bark resources rich in beneficial substances on the learning ability and memory improvement. It functions to inhibit the activity of acetylcholinesterase in brain tissue and improve cognitive functions in a simulation model of cognitive impairment induced by scopolamine. Hence, it can promote memory and learning ability. The formulation of the fruit and vegetable bark uses the extract of fruit and vegetable peels, which has long been used without causing toxicity in a wide range of food applications. Therefore, it can be used safely without a risk of side effects, even in the case of a long-term administration for the preventive purpose. Furthermore, the present study is a very beneficial study in the environment-friendly aspect in association with recycling of resources as it is based on the novel efficacies of fruit and vegetable barks which have been conventionally disposed as a refuse of fruits due to their poor sensory qualities despite the content of beneficial substances.

• The Journal of Engineering Geology
• /
• v.3 no.2
• /
• pp.149-165
• /
• 1993

Nowadays, the field hydraulic test is still an only method to evaluate groundwater characteristics in subsurface. The results of hydraulic test are very important for the concept model of fracture hydrogeology as well as the geometric pattern of fractures. The hydraulic tests performed in Korea are generally analysed under such assumption as steady radial flow in homogeneous aquifer or along simple geometry of fractures. Also the transmissivity measured in a fixed interval length is equivalent to a sum of individual fracture transmissivities in test legth. The boundary effects of weH hydraulics and the geometry of flow paths are hardly obtained from the test results analysed by a steady flow method. To circumvent this problem, the flow dimensional analysis was attempted from the results of constant pressure injection test carried out in a fractured granite area. A comparison of the hydraulic conductivity values from the transient and steady analysis shows that the latter is about a factor of 2~3 higher than the former. However, it was possible to analyse a flow dimension of each test interval from flow rate variation with time. The upper part of the bedrock(<10m deep) indicates an open boundary and the flow dimension shows nearly steady states, while the lower part of the bedrock(>25m deep) is characterized as sublinear flow dimension with a dosed boundary. In one of the test sections(15m deep), the flow dimension was changed from linear flow to spherical flow. From the experience of this study, one of the immediate problems to be solved is to enhance the field testing equipments, i.e., an accurate flowmeter with autorecording and a pressure detecting device to be able to install in the test section.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.44-50
• /
• 2001

After modeling an aircraft turboprop engine using SIMULINK$\circledR$, performance simulation of PT6A-62 engine, which is main power plant of KT-1, was performed. For validation, performance parameters of the SIMULIINK model were compared with the simulated results by GASTURB program. It was confirm that the results by the SIMULINK model were well agreed with those by GASTURB within 1.07%, It was assumed that installation losses were bleed-air exteraction with a range from 0% to 5%, and power for accessories with a range from 0 to 20hp. In this investigation, it was found that the shafthorsepower was decreased by maxium 0.68%, but specific fuel consumption ratio was not effected nearly by these losses.

• 한국해양학회지
• /
• v.24 no.1
• /
• pp.29-38
• /
• 1989

It has been believed that the circulation in the Japan Sea involves separation of current from the Korean coast and formation of a cold cyclonic gyre in the north. To explain this, a simple quasi-geostrophic linear model is considered. The model is basically of an inflow-outflow system. The local forcings, wind and air-sea heat exchange together with damping (both mechanical and thermal), are imposed upon. The results show that only the buoyancy damping due to perturbations from local thermal adjustment can cause the separation and the gyre. Various types of circulation patterns are possible depending on the intensity of the thermal forcing.