• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1149-1160
• /
• 2019

In this study, two radiometric correction methods deriving reflectance from UAV multispectral image for monitoring forest vegetation were applied and evaluated. Multispectral images were obtained from a small multispectral camera having 5 spectral bands. Reflectance were derived by applying the two methods: (1) the direct method using downwelling irradiance measurement and (2) the empirical line correction method by linking a set of field reflectance measured simultaneous with the image capture. Field reflectance were obtained using a spectroradiometer during the flight and used for building the linear equation for the empirical method and for the validation of image reflectance derived. Although both methods provided the high correlations between field reflectance and image-derived reflectance, their distributions were somewhat different. While the direct method provided rather stable and consistent distribution of reflectance all over the entire image area, the empirical method showed very unstable and inconsistent reflectance distribution. The direct method would be more appropriate for relatively wide area that requires more time to acquire image and may vary in downwelling irradiance and atmospheric conditions.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.950-957
• /
• 2023

Purpose: The response technology is needed to prevent the spill of highly toxic oil contaminants in advance. Therefore, this paper described the results of an experimental study to predict the engineering properties of the developed reactive material. Method: Compaction tests and spectral information acquisition experiments were conducted on the reactive materials, and the results were evaluated. In addition, the correlation between spectral information and maximum dry unit weight was analyzed to evaluate the possibility of predicting the engineering properties for reactive materials. Result: The compaction test results showed that the maximum dry unit weight was in the range of approximately 9kN/m³ to 10kN/m³. The spectral information confirmed that the maximum reflectance decreased as the polynorbornene decreased. Conclusion: It was confirmed that the maximum dry unit weight of the reactive material for absorbing oil contaminants can be predicted using the maximum reflectance according to the component ratio of the reactive material.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2033-2037
• /
• 2008

최근 들어 국지성호우와 장마, 태풍에 의한 자연재해는 모든 분야에서 심각한 영향을 미치고 있다. 자연재해로 발생한 토사는 하천, 농업용 저수지, 댐 및 하구를 메워 흐름을 방해하고 저서생태계에 미치는 영향은 매우 크다. 이러한 토사는 농업용 저수지와 홍수 조절용 구조물의 사용 수명을 단축시키고, 하상을 높여 흐름을 방해하거나 변화시켜 하천 범람을 발생하기도 한다. 한편 하천범람과 제방 붕괴 등은 농지 침수는 물론 작물의 성장을 방해하는 등 많은 경제적 손실을 가져오고 있다. 본 연구에서는 토사의 농도와 분광반사특성의 상호관계를 알아보기 위하여 분광복사계(Li-1800)를 이용하여 미리 제작한 수조 안의 토사(실트질, 모래질) 농도를 변화시켜 토사농도에 따른 분광반사 특성을 파악하고, 그 특징에 대해 검토, 고찰하였다. 연구결과 실트질의 체적반사율이 모래에 비해 약 40% 높게 나타났으며, 실트와 모래 모두 $554{\sim}588nm$영역에서 최대반사율을 나타내었다. 상관분석 결과 각 토사의 상관계수는 실트질이 $0.63{\sim}0.99$, 모래가 $0.73{\sim}0.96$의 값을 나타냈으며, 두 토양 모두 $550{\sim}900nm$영역에서 r>0.90의 높은 상관성을 보였다. 또한, 토사농도에 따른 반사특성은 실트질의 경우 토사 농도가 $0{\sim}60%$까지 $470{\sim}740nm$영역에서 큰 상승폭을 보인 반면, 모래의 경우 토사농도가 25%까지 크게 증가하였으나 30%이상의 농도에서는 변화 폭이 매우 적어지는 특징을 보였다. 토사농도의 변화에 따른 탁수의 분광 반사특성은 토사의 종류에 따라 크게 다르다는 것을 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.392-400
• /
• 2001

This paper proposes an illuminant estimation algorithm that estimates the spectral power distribution of an incident light source from a single image. The proposed illumination recovery procedure has two phases. First, the surface spectral reflectances are recovered in the maximum achromatic region (MAR) which is the most achromatic and highly bright region of an image after removing partially the effect of illumination using a modified gray world algorithm. Here, the surface reflectances of MAR are estimated using the principal component analysis method along with a set of given 1269 Munsell samples. Second, the Population of reflected lights is determined with 1269 Munsell samples and a set of illuminations then the spectral distribution of re(looted lights of MAR is selected from the spectral database. That is, color differences are compared between the reflected lights of the MAR and the spectral database, which is the set of reflected lights built by the given set of Munsell samples and illuminants. Then the closest colors from the spectral database are selected. Finally, the illuminant of an image can be calculated dividing the average spectral distributions of reflected lights of MAR by the average surface reflectances of the MAR. In order to evaluate the proposed algorithm, experiments with artificial scenes, which are exposed to chromatic illuminants, were performed and the spectral distribution of estimated illumination and color difference are compared with results of the conventional method.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.141-149
• /
• 2021

In this study, an laboratory experiment was performed for prediction technology of water content in the ground using hyperspectral information. And the spectral reflectance with a specific wavelength band was obtained according to the fine and water content. Through it, the spectral information was normalized with the spectral index of the existing literature, and the relationship with the fine and water contents and the reliability of the prediction technology were analyzed. As a result of analysis, the spectral reflectance is decreased when the water and fine contents are increased under the high water contents. In addition, the reliability of prediction technology of water content was evaluated by examining 7 different spectral index calculation methods. Among them, DVI showed relatively high prediction reliability and was superior to other calculation methods in terms of sensitivity.

• Journal of the Korean Geographical Society
• /
• v.35 no.1
• /
• pp.3-15
• /
• 2000

산업화와 더불어 심각해지고 있는 수질오염 문제를 해결하기 위해서는 여러 가지 수질관리 방안이 요구된다. 수질오염이 과거에는 국지적이었으나 점차 광범한 지역으로 확장됨에 다라 지속적인 수질 모니터링에 어려움이 따른다. 본 연구에서는 위성영상을 사용한 원격탐사 기법으로 수역의 수질환경 인자를 추출하고자 한다. 사용된 영상은 Landasat TM이며, 연구지역은 한강하류 지역이다. 수질분석 인자는 클로로필-a, 부유물질, 투명도 등을 선정하였으며, 수면분광반사율의 특징 및 수질인자별 처리기법을 개발하는데 목적을 두었다. 분광특성 분석결과를 요약하면, 첫 번째 스펙트럼 반사율 분석결과 클로로필-a의 농도는 0.4~0.5$\mu\textrm{m}$ 파장대역에서 낮은 반사치 경향을 보이며, 녹색파장대인 0.57$\mu\textrm{m}$ 부근에서 반사율이 높아진다. 두 번째 부유물질의 반사도는 농도가 증가할수록 0.8$\mu\textrm{m}$ 부근에서 상대적으로 낮은 반사율이 나타난다. 마지막으로 투명도가 낮은 수면은 0.55$\mu\textrm{m}$에서 높은 반사율 경향을 보인다. Landsat TM영상을 이용하여 주성분분석 및 비연산처리를 실시하여 수질분석을 시도한 결과를 보면 클로로필-a와 투명도는 제1주성분 영상 및 제2주성분 영상에서 현장 실측자료와 유사한 결과를 얻을 수 있었으며, 부유물질은 밴드 2와 밴드 4의 비연산처리를 통하여 분포도를 작성할 수 있었다. 이상의 결과들은 계절적 및 시간적 변화에 따라 파장대역이 달라질 수 있다. 그러므로 위성자료를 이용하여 보다 정확한 수질환경 인자를 추출하기 위해서는 현장실측 및 수역의 분광반사 특성을 지속적으로 조사하여야 한다.때문으로 경주 산사태와 포함-구릉포간 국도면의 산사태가 이 종류의 산사태에 속한다.열 인식의 신뢰도를 향상시킬수 있는 방법을 제안하였다.작성하여 최신 의료영상 처리 기법을 쉽게 임상에 적용하고 실험할 수 있는 장점이 있다. 지대에서 가능하였고, 파종기는 중생종보다 이르게 나타났다. 등숙만한출수기 기준의 안전작기는 조생종과 중생종은 태백고냉지대와 태백준고냉지대, 소백산간지대 일부지역을 제외한 다른 지역에서 설정되었고, 중만생종은 태백고냉지대, 태백준고냉지대, 동해안북부지대, 소백산간지대, 노령소백산간지대의 일부 지역은 벼 담수직파가 불가능하게 판단되었다. information on the regular basis of time and provide it when the users query over the Web-database gateway. The other approach is a shopping agent mechanism, which stores information on "how to shop" and the shopping agent collects the information of product items just after users query about the product and provide the information in real time or notify them by alerting service. Thirty nine shopping information services are compared and classified in this paper and they are extracted from "Naver" and "Yahoo! Korea". The final result shows that most services are just a

• KCID journal
• /
• v.10 no.1
• /
• pp.53-61
• /
• 2003

Rapid environmental changes result in not only damage to agricultural produce but also the poor growth and death of plants. Remote Sensing (RS) was one of effective methods for both collecting and analyzing information and predicting the change of agricul

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 1998.09a
• /
• pp.69-70
• /
• 1998

• The Journal of the Korean dental association
• /
• v.34 no.10 s.329
• /
• pp.733-741
• /
• 1996

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.499-505
• /
• 2013

Pine wilt disease has known as a serious forest disease in East Asia such as Japan, Korea and China. Fumigation and burning are considered as best way to treat infected tree at early detection. For investigate spectral reflectance characteristics of infected trees, periodic measurement has been done in both infected and non-infected trees. Infected and non-infected trees' reflectance (400 nm~2,500 nm wavelength) are detected from June to October with GER3700 spectrometer. Noise of reflectance data was corrected using cubic spline interpolation method. Reflectance was changed in most of infected trees with ranges Red (600 nm~700 nm) and Middle Infrared (1,400 nm~1,500 nm) within two months after injected by Pine Wood nematode (PWN), but there was no differences in non-infected trees. Infected and non-infected trees were compared statistically in each period. As a result, we found that a statistically significant difference was occurred at Red and Middle Infrared (MIR) 2 months after injection (p<0.05), however, no significant difference in near infrared (p>0.05). Therefore, the early detection of infested pine trees by PWN may possible through detecting the change of spectral reflectance at red and MIR.