• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.122-130
• /
• 2004

Crude oil is complex mixture of thousands of different organic compound formed from a variety of organic materials that are chemically converted under differing geological conditions over long periods of time. Also oil composition varies according to crude source, refining, processing, handling and storage. The oil fingerprint method is application of specific knowledge of petrochemicals and use of sophisticated analytical equipment and techniques to identify the source(s) of oil pollution. KNMPA currently utilizes three primary analytical techniques: Gas Chromatography (GC), Fluorescence Spectroscopy(FL) and Infrared Spectroscopy(IR). Of all these techniques, GC technique are most widely used. Gas Chromatography is used as a primary analytical method because high reliableness, high separating efficiency and repeatability, but it is timeconsumable. The study results of identification of waterborne spilled oil by Fast Gas Chromatograph method showed that analytical time is cut down to 30minutes in comparison with packed column method and chromatograms represent high resolution and high repeatability.

• Journal of the Korean Chemical Society
• /
• v.37 no.5
• /
• pp.496-502
• /
• 1993

Spectrophotometric determination of rare earth elements with MTB and the composition ratio were investigated in the presence of surfactants of cetylpyridinium chloride (CPC), Triton X-100, dodecyltrimethylammonium bromide (DTMAB) and cetyltrimethylammonium bromide (CTMAB) at pH 6.5. The colour development between MTB and rare earths in the presence of cationic surfactants was very stable and more sensitive than that in the absence of surfactants. The largest absorbance increase was provided by CPC, which was therefore chosen for determination of rare earth elements. REE-MTB-CPC complex has absorption maxima at 650 nm and obeys the Beer's law in the range of 0∼100 ng/ml. Molar absorptivity is $6.6{\sim}9.4{\times}10^4\;mol^{-1}l\;cm^{-1}$.

• Journal of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.311-316
• /
• 1978

The reaction between iron(III) and Xylenol Orange (XO or $H_6A$) has been investigated spectrophotometrically. It has been established that iron (III) and XO form two complexes with compositions iron(III) : XO = 2 : 1 and 1 : 1. The 2 : 1 complex is stable in acidic medium containing excess of iron, and 1 : 1 complex is stable in slightly acidic medium containing excess of XO. The absorption maxima are at 590 nm (2 : 1) and 500 nm (1 : 1), the molar absorptivities being $3.18{\pm}0.04{\times}10^4,\;1.32{\pm}0.03{\times}10^4$respectively. The stability constants of two complexes studied by varying pH are $loglog{\beta}_{21}=18.69{\pm}0.03,\;log{\beta}_{212}=42.08{\pm}0.09,\;log{\beta}_{11}=4.17{\pm}0.04,\;and\;log{\beta}_{113}=34.47{\pm}0.07.$

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.179-185
• /
• 1988

The reaction of VO_2\;^+$ with benzyl alcohol in perchloric acid and aqueous dimethylformamide leads to the formation of $VO^{2+}$ and benzaldehyde. The products, $VO^{2+}$ and benzaldehyde, are identified by infrared spectroscopy and gas chromatography. Kinetic studies on the reaction of VO_2\;^+$ with benzyl alcohol have been carried out using visible spectroscopy. The empirical rate equation can be expressed as $-d[VO_2\;^+]/dt=2\{\\{k_O+k_H[HClO_4]\}\[VO_2\;^+][C_6H_5CH_2OH]$ The rate determining step for the reaction is the process for the formation of $VO^{2+}$ and $C_6H_5CHOH$. The activation parameters are ${\Delta}H^{\neq}=13.32{\pm}1.73\;kcalmol^{-1}$ and ${\Delta}S^{\neq}=-31.02{\pm}0.09\;calmol^{-1}K^{-1}$ for the oxidation of benzyl alcohol in aqueous dimethylformamide.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.5
• /
• pp.863-866
• /
• 1994

This study was carried out to estimate aluminum contents of commercial beverage foods by atomic absorption spectrophotometer. The contents of aluminium in drinking yogurt, curd yogurt, fruit beverage, carbonated beverage, fruit canned food and commerical teas ranged from 161.667 to 173.333ppm 139, 300 to 293, 925ppm, 1.481 to 7.130 ppm, 1.803 to 6.026ppm, 4.600 to 7.053ppm 194.437 to 846.056 ppm, respectively.

• Journal of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.130-135
• /
• 1973

The rate-constants of hydrolysis of 3, 4-methylenedioxyphenylmethylenemalononitrile are determined by ultraviolet spectrophotometry at various pH and a rate equation which can be applied over wide pH range is obtained. The rate equation reveals that below pH 5.0 and above pH 9.0, the hydrolysis is initiated by the addition of water and hydroxide ion respectively. However, at pH 6.0-8.0 the competitive addition of water and hydroxide ion occurs. The catalytic contribution of hydroxide ion and water can be fully explained by the rate equation obtained.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.90-95
• /
• 2001

Kinetic Analysis of Cathepsin B Inhibitor Using a Spectrophotometric Assay. Han, Kil-Hwan and SangDal Kim*. Department of Applied MicrobioJ0f5Yt Yeungnam UniversitYt Kyongsan 77 2-749, Korea - The KHS 10, C4Hl10~6 formula produced from Streptomyces luteogriseus KT-] 0 effectively inhibited a lysosomal cysteine proteinase, cathepsin B. It inhibited the enzyme activity of cathepsin B competitively when the N a-CBZ-Llysine p-nitrophenyl ester HC] (CLN) was used as a substrate. The inhibition const:mt (Ki) of KHS 1 0 for cathepsin B detennined by spectrophotometeric assay was 430 nM. The effective inhibition of cathepsin B was observed at $25^{\circ}C$ :md pH 6.0. The cathepsin B inhibitor, KHSlO needed a preincubation of cathepsin B with the inhibitor for over 5 min. The KHS 10 preserved over 80% inhibition activity even after heat-treatment at $100^{\circ}C$ for ] hr.

• Journal of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.36-42
• /
• 1982

Filters were evaluated to use in the collection of ammonia and ammonium salts in the atmosphere. Ammonia from standard gas generator was collected on a glass fiber filter impregnated with a mixture of 3% boric acid and 25% glycerin. The collection efficiency by the impregnated filter was 96.4${\pm}$2.15% in pH control method and 97.4${\pm}$1.06% in the atmosphere for five measurements, respectively. Adsorption and desorption of gaseous ammonia were compared using three commercially available filters; glass fiber, quartz fiber and polycarbonate filters. Both glass and quartz fiber filters indicated some loss of ammonium salts and adsorption of ammonia, respectively. However, polycarbonate filter was found to be satisfactory for the collection of ammonium salts in the atmosphere. The minimum measurable concentration of ammonia was 0.83ppb (ca. 0.63${\mu}g$/$m^3$) by spectrophotometry of the indophenol method for the sample collected by 47mm${\phi}$ filter(20l/min, 60min). The sensitivity of the present method is about 20 folds higher than that of conventional method of bubbler collection followed by spectrophotometry, so that this method makes it possible to measure thevariation of ammoniacal concentrations in the atmosphere for a short time period of about 60 min.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1995

Spectrophotometric determination of U(VI) and Th(IV) by Flow injection method is described. Chrome Azurol S forms water soluble complexes with U(VI) and Th(IV) in the presence of cethyltrimethylammonium bromide. The maximum adsorption of U(VI) and Th(IV) complexes are at 600nm with molar absorptivity of $2.3{\times}10^5Lmol^{-1}cm^{-1}$ and 611nm with molar absorptivity of $3.8{\times}10^5Lmol^{-1}cm^{-1}$ in acetate buffer medium having pH 5.0 and 5.5. The calibration curves of U(VI) and Th(IV) are linear over the range of 0.1~0.8ppm and the correlation coefficients are ca. 0.9960 and 0.9930 respectively. The detection limits(S/N) are 20ppb for U(VI) and 15ppb for Th(IV). The relative standard deviation are ${\pm}1.8%$ for U(VI) and ${\pm}2.1%$ for Th(IV). The sample throughput was ca. $50hr^{-1}$.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.344-351
• /
• 1987

Kinetic studies on the complexing of $[Mo_2O_4(H_2O)_6]^{2+}$ with thiocyanate have been carried out using the spectrophotometric method. The observed rate constant is given by, $k_{obsd}=\{\\k_0+k_H[H^+]\}\;[SCN^-]^2+k_r$. At $25^{\circ}C$ and ionic strength of 2.84 the values of $k_f\;and\;k_r\;are\;5.96{\pm}0.35\;M^{-2}s^{-1}\;and\;(5.45{\pm}4.77){\times}10^{-4}s^{-1}$, respectively. Activation parameters from data at $20^{\circ}$∼$35^{\circ}C\;are\;{\Delta}H^*=38.04{\pm}5.31kJmol^{-1}\;and\;{\Delta}S^*=-172.69JK^{-1}mol^{-1}$. The mechanisms are discussed.