• Resources Recycling
• /
• v.26 no.2
• /
• pp.66-70
• /
• 2017

The purpose of this research was to estimate density changes of sea sand by washing. To examine water content test, field density test, particle density test and measuring of dump regarding extracted sea sand and selling one. Measured result of mean particle density of barge and dump were $2.666g/cm^3$, $2.651g/cm^3$, respectively. Also, measured result of field density for each sea sand was $1.716g/cm^3$, $1.331g/cm^3$ on average. Converted to the volume of 1ton of each sea sand, $0.583m^3$, $0.751m^3$, respectively. Occurring to volume change approximately 28.8% on average. The mean field densities of measuring of sea sand that dump and barge were $1.398g/cm^3$ and $1.716g/cm^3$ respectively. This values indicated $0.715m^3$ and $0.583m^3$ each, when converted to the volume of sea sand 1ton. It was found that the average of 22.6% volume change occurred between the amount of sea sand and the sales volume.

• Analytical Science and Technology
• /
• v.6 no.4
• /
• pp.383-390
• /
• 1993

Retention behaviors of aliphatic and aromatic compounds were investigated with Van der Waals volume which represented the molecular size. The organic solvents, methanol, acetonitrile and tetrahydrofuran, were mixed with water at various ratio, respectively. The selectivity of organic solvents were tested by change of column temperature. The capacity factor was increased linearly according to the enlargement of molecular size. Therefore, Van der Waals volume was useful to predict the elution of organic molecules in reversed-phase column. The order of elution capacity of solvents was methanol

• Journal of the Korean Chemical Society
• /
• v.37 no.12
• /
• pp.1003-1009
• /
• 1993

The viscosities of benzene have been determined at several temperatures and pressures to investigate the effect of temperature and pressure on the viscosity of benzene in liquid phase. When a falling ball viscometer with a constant volume contained a given amount of liquid benzene at desired temperatures and pressures, the viscosities of benzene in the viscometer could be evaluated from the measurements of the falling time of a skinker. The variations of the specific volume and the free volume of liquid benzene with temperature and pressure were, from the results, searched out. Finally, the effects of temperature and pressure on the viscosity of benzene were discussed by means of the variations of free volume with temperature and pressure.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.415-420
• /
• 1985

In this study, changes in physical and chemical properties of glutinous rice during various soaking periods (0, 0.08, 1, 3, 5, 7, 10 days) were investigated in order to clarify the relations ship between soaking period and expansion volume in the preparation of Gang Jung. The longer the soaking period was, the greater the expansion volume of Gang Jung was. Higher maximum viscosity and breakdown in amylogram of glutinous rice flour were observed as the soaking period was increased, As the length of soaking period increased, hardness of glutinous rice and size of flour particle significantly decreased, while sweeling power and solubility of glutinous rice flour showed no significant difference. Increased length of soaking period was associated with higher fatty acidity, higher acidity of water extract and lower pH of glutinous rice flour. Control of flour particle size distribution resulted in significantly larger expansion volume of Gang Jung. Brabender's amylogram showed that the increase of expansion volume of Gang Jung associated with the increase of soaking period was related to the change of rheological properties of glutinous rice. It seemed that changes in viscometric properties of glutinous rice was attributed to the different flour particle size distribution resulted from changes in hardness of rice during soaking.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.135-137
• /
• 2013

본 논문은 포인터 레이저를 이용한 3D 스캔방식을 제안한다. 3D 스캔이란 물체의 3차원 정보(x, y, z)를 추정하는 기술이다. 3D 스캔 기술은 과거에서부터 많은 연구가 진행 되었으며 스테레오 카메라, 패턴 인식 등 다양한 방식으로 3파원 정보를 추정 한다. 기존의 방식들은 물체의 표면 정보를 정확하게 스캔하는 장점을 가졌지만, 스캐너의 비용이 비싸고, 그 부피가 크다는 단점 때문에 상용화에 어려움이 많다. 본 논문은 기존 방법보다 부피가 작고 가벼우며 시스템 비용이 적은 포인터 레이저를 이용하여 3차원 정보를 추정하는 방법에 대하여 설명한다. 물체의 깊이 정보(z)에 따른 포인터 레이저의 영상에서의 위치 변화를 통하는 방식으로 3차원 정보 추정을 구현 하였다. 실험을 통하여 포인터 레이저만으로 3차원 정보가 추정 되는 것을 확인한다. 위 방법은 3D 스캐너의 부피가 최소화 되므로 다양한 제품에 부착되어 3D 스캐너의 상용화를 기대한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.632-635
• /
• 2010

본 논문에서는 다중벽 탄소 나노튜브를 작동유체로 사용하는 전자장치 냉각용 소형 히트파이프의 열적성능을 실험적으로 확인 하였다. 실험의 결과들을 바탕으로 다중벽 탄소 나노튜브 나노유체를 작동유체로 사용하는 히트파이프의 열저항은 동일한 충진량을 가지는 물을 작동유체로 사용한 히트파이프와 비교하여 나노유체의 부피비가 0.5%일때, 최대 18.6% 감소한다. 다중벽 탄소 나노튜브 나노유체의 열저항은 동일한 입열량에서 나노유체의 부피비가 증가 할수록 감소하는 것을 알 수 있다. 이를 통하여 다중벽 탄소 나노튜브 나노유체 히트파이프의 열저항은 나노유체의 부피비에 변화에 따라서 변한다는 것을 확인 할 수 있으며, 추가적으로 증발부에서 유체의 기화로 인한 나노입자의 증착에 의하여 열전달 표면적의 증가 또한 열저항의 감소 원인으로 예측가능 하다.

• Water for future
• /
• v.28 no.5
• /
• pp.141-150
• /
• 1995

An air chamber is designed to keep the pressure from exceeding a predetermined value, or to prevent low pressures and column separation. Therefore, it can be used to protect against rapid transients in a pipe system following abrupt pump stoppage. In this research, an air chamber was applied to a hypothetical pipe system to analyze attenuation effect of pressure head for different air volumes, locations, chamber areas, coefficients of orifice loss and polytropic exponents. With an increase of air volume, the maximum pressure head at pump site is decreased and the minimum pressure head is increased. For different locations and areas of the chamber, the attenuation effects do not show much difference. Also, as the orifice loss coefficient increases, the maximum pressure head is decreased. For different polytropic exponents, isothermal process shows lower maximum pressure head than that of the adiabatic process.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.17-26
• /
• 2005

Soil water characteristic curve (SWCC) is a unique characteristic that should be considered In the analysis of unsaturated soil and prediction of unsaturated properties. However, the volume change of soil specimens that happens in the existing apparatus affects the SWCC, Therefore, In this study, we intended to obtain more appropriate SWCC by measuring the change In the volume of the specimen in the SWCC tests. The measured change of void ratio indicates that the saturation step prior to the test changes the original structure of the soil specimen. Thus we carried out the test far the same specimen omitting the saturation step prior to the test. The change of void ratio by this test procedure is relatively small.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.263-269
• /
• 2003

Magnetic flux leakage (MFL) signals were used for corrosion inspection of buried oil and gas pipeline. 3D finite element analysis was used to examine the effects of far and near-side pit depth and tensile stress on MFL signals. Anisotropci materials were used, and the effects of simulated tensile stress on MFL were investigated. The axial and radial MFL signals depended on far and near-side single pit depth and on the bulk stress, but the circumferential MFL signal did not depend on them. The axial and radial MFL signals increased with increasing pit depth and the bulk stress, but the circumferential MFL signal was scarcely changed.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.3
• /
• pp.154-159
• /
• 2012

Structural volume change occurring on the Si-based anode battery materials during alloying/dealloying with lithium is noticed to be a major drawback responsible for a limited cycle life. Silicon monoxide has been reported to show relatively improved cycling performance compared to Si-containing materials for rechargeable lithium batteries, due to the structural buffering role of in-situ formed $Li_2O$ and lithium silicate during the reaction of silicon monoxide and lithium. Here we report improved cycling ability of interfacially stabilized Si-$SiO_2$-graphite composite anode using silane-based electrolyte additive for rechargeable lithium batteries, which includes low cost silicon dioxide for structural stabilization and graphite for enhanced conductivity.