• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.3
• /
• pp.116-121
• /
• 1997

Pilot wetland reactor systems to test acid mine drainage treatment efficiencies for metals were designed and operated at the Dalsung mine and surveyed the operating problems. pH and Eh (redox potential) were measured in situ and anayses of Cd, Pb, As, Zn, Cu, Fe, Al and Mn were carried out in the laboratory. Maximum metal removal efficiencies of the reactor containing the rice stalks, the cow manure and limestones were that Cu, Zn, Fe, Cd, Al, Mn and Pb were lowered by 98%, 100%, 99%, 100%, 97%, 61% and 100%, respectively and at that time the pH and Eh of the effluents from the reactor were 6 and about -300 mV. However, the redox potential was raised and removal of metal elements except aluminium was decreased with operation time. It suggests that the reduced condition is very important for the metal removal. During the operation, problems such as scaling in pipes and volume change of the substrate within the reactor occurred, which were preventing the flow of main drainage in pipes and reactor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.37-46
• /
• 2004

Several notes on ground effects drawn from Navier-Stokes analyses and their aerodynamic interpretations were addressed here; For two-dimensional ground effect, the change of surface pressure due to image vortex, the venturi effect due to thickness and the primary inviscid flow phenomena of ground effect, and for three-dimensional ground effect, strengthened wing tip vortices, increased effective span and the outward drift of trailing vortices. Irodov's criteria were evaluated to investigate the static longitudinal stability of conventional NACA 6409 and DHMTU 8-30 airfoils. The analysis results demonstrated superior static longitudinal stability of DHMTU 8-30 airfoil. The DHMTU airfoil has quite lower value of lrodov's criterion than the conventional NACA airfoil, which require much smaller tail volume to stabilize the whole WIG-craft at its design stage.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.597-610
• /
• 1997

One-dimensional numerical models using finite difference methods for unsteady sediment transport on alluvial river channel are developed. The Preissmann implicit scheme and the Lax-Wendroff two-step explicit scheme with the Method of Characteristics for water motion and a forward time centered space explicit scheme for sediment motion are developed to simulate the sediment transport rate and the variation of channel bed level. The program correctness of each model is successfully verified using volume conservation tests. The sensitivity studies show that higher peak stage level, steeper channel slope and longer flooding duration produce more channel bed erosion. and median grain size, $D_{50}=0.4mm$ give maximum volume loss in this study. Finally, the numerical models are found to produce reasonable results from the various sensitivity tests which reveal that the numerical models have properly responded to the changes of each model parameter.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.291-300
• /
• 2016

Techniques for selectively separating molecules of gas and liquid states using various separation membranes have been widely used in variety of applications such as chemical, biological, pharmaceutical, and petrochemical industries. As the nanochannel diameter, inter-channel distance and length of the nanochannel of the anodic aluminum oxide (AAO) membranes can be precisely controlled, various studies to effectively separate mixture of various molecules using AAO membrane have been widely carried out. In this study, we fabricated AAO membranes of cylindrical nanochannels of various diameter sizes and of through-hole structure, that is, nanochannels of which both ends of each nanochannel are open. Using those AAO membranes of through-hole nanochannel structure, we studied the selective permeation polymer chains dissolved in a solvent based on hydraulic volume of the polymer chains. We found a precise, quantitative relationship between the radius of gyration of polymer chains that permeated through nanochannels inside AAO membrane and the diameter of nanochannels. In addition, we demonstrate that the behavior of the polymer solution flowing through nanochannel of the AAO membrane can be successfully described with the Hagen-Poiseuille relationship. It is, therefore, possible to theoretically interpret the nanoflow of the solution flowing inside the cylindrical nanochannel.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.644-650
• /
• 1999

Trace amount of cobalt in water samples was preconcentrated continuously with an organic precipitant and determined by flame atomic absorption spectrometry. The flow injection technique was used to preconcentrate cobalt by on-line direct precipitation with 1-nitroso-2-naphthol. The precipitation was dissolved with methyl isobutyl ketone (MlBK) and was sent to the flame. The optimum conditions for cobalt determination were determined and used to analyze Co samples. For 1.0 mL of sample, the enrichment factor was 13 and the sample throughput was about lO per hour for 0.5 ppm Co solution. The enrichment factor was increased to 68 fold for 10.0 mL. A semi-reference biologicaI sample was prepared and analyzed. The result was in good agreement with the expected value with RSD of 4%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.233-233
• /
• 2011

ECR 이온원을 가볍고 작게 하면서 운전을 단순화함으로써 유지보수를 최소화하는 것은 특히 의료용 중입자 가속기에서 매우 중요한 조건 중 하나가 된다. 탄소 다가 이온을 만들어내기 위한 의료용 중입자가속기의 이온원으로 영구자석형 ECR 이온원을 개념 설계하였다. 영구자석은 이온원 입출구에서 강력한 축방향 자장을 만들기 위한 솔레노이드 자석 두 개와 반경방향 자장을 만들어 주기 6극 자석으로 구성된다. 또한 축방향 자장 흐름을 효과적으로 만들어주기 위한 두 개의 링 형 자석을 추가하여 자장의 강도를 높였다. 그러나 영구자석으로만 만들어진 자장 구조는 제작과 동시에 고정이 되어 수정이 불가능하기 때문에 제작 후 매우 제한적인 운전영역을 가질 뿐 만 아니라 최악의 경우에는 운전조건을 찾지 못하는 경우도 발생할 수 있다. 따라서 본 설계에서는 그림과 같이 두 개의 작은 보조 솔레노이드 전자석을 추가하여, 최소한의 운전조건으로 ECR 이온원의 공명영역을 결정하는 최소 자장의 구조뿐만 아니라 축방향 자장의 세기도 각각 능동적으로 제어할 수 있도록 하였다. 또한 마이크로파원으로는 TWT (Traveling Wave Tube)를 사용하여 10 GHz에서 14 GHz 까지 다양한 주파수에서 운전이 가능할 수 있도록 설계하였다. 이러한 설계를 통하여 다양한 운전조건을 가질 수 있는 안정된 ECR 이온원을 부피가 작으면서도 유지보수를 최소화하는 구조로 만들 수 있으며, 본 이온원은 탄소 다가 이온을 만들어내기 위한 목적뿐 만 아니라 다양한 중이온을 작은 규모로 만들어내기 위한 장치에서도 사용될 수 있다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.141-148
• /
• 2003

A data collection of a liquid radioactive waste treatment process of a research organization became necessary while developing the RAWMIS(Radioactive Waste Management Integration System) which it can generate personal history management for efficient management of a waste, documents, all kinds of statistics. This paper introduces an input and output application program design to do to database with data in the results and a stream process of a treatment that analyzed the waste occurrence present situation and data by treatment process. Data on the actual treatment process that is not limited experiment improve by a document, human traces, saving of material resources and improve with efficiency of tracking about a radioactive waste and a process and give help to radioactive waste material valance and inventory study.

• Clean Technology
• /
• v.10 no.3
• /
• pp.159-168
• /
• 2004

Benzene adsorption experiment was carried out for activated carbon and zeolite 13X adsorbents. Single column and dual column packed with two adsorbents were used to investigate the dynamic adsorptive characteristics. Effect of feed flow rate on the breakthrough curve was not significant. Specific adsorption amount of benzene for activated carbon was larger than that for zeolite 13X. On the contrary, adsorption amount per column volume was larger for zeolite 13X column because the density of zeolite 13X was larger. In the dynamic experiment using dual adsorbents column, length of mass transfer zone was changed by the feed direction. Breakthrough time was longer and breakthrough curve was sharper when activated carbon was packed in feed inlet and zeolite 13X was packed in column outlet. Also breakthrough time and breakthrough curve slope were affected by the packing ratio of the two adsorbents.

• Journal of the Korean Chemical Society
• /
• v.65 no.5
• /
• pp.370-381
• /
• 2021

This study compared and analyzed the chemistry curriculum of South Korea and Singapore. The analysis revealed that Korea's achievement standards in the chemistry subject comprised knowledge and skills, whereas Singapore's achievement standards comprised knowledge, skills, values, and attitudes. The scope of knowledge and skills of the Singaporean achievement standards-wherein each element was explicitly presented-were more extensive than that of Korea. The elementary school curriculum in both countries was structured to help students qualitatively understand materials in real life, whereas the middle school content was structured such that students could understand the topic of particles. Additionally, several differences were found in specific content elements; for example, the periodic tables were included only in the Singaporean content, whereas changes in the volume of gas according to temperature and pressure were included only in the Korean content. The Singaporean academic achievement standards, integrating knowledge, skills, values, and attitudes in science curriculum, can be used as a reference for adjusting and restructuring the Korean curriculum.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.237-237
• /
• 2020

수도계량기(이하 "수량계")는 액체용 적산부피계로 물 사용량을 적산 계량하기 위한 기계기구 또는 장치이며 수량계 검정기준에 의해 검사기준 합격제품을 사용하서 수도요금을 징수합니다. 사실상 국내계량에 관한 법률에 의거하여 전이유량비가 6.3배수(2014년) > 4.0배수(2016년) > 1.6배수(2017년)로 점점 향상되며 2017년 기준으로 국제법정계량기구(OIML)의 성능과 같은 1.6배수까지 향상되어 국내의 수량계 기술기준이 많은 부분 향상되었습니다. 그러나 국제법정계량기구(OIML)는 현재 1.6배수의 80배수까지 검사기준에 합격에 반하여 현제 국내의 검사기준은 1.6배수의 100배수까지만 합격기준을 가지고 있습니다. 이러한 기준은 점차 발전해가고 있는 후발국가에 속하는 자국의 검사기준이 너무 갑작스럽게 국제법정계량기구(OIML)의 기준보다 높은 검사기준을 시행하며 많은 문제가 발생한 것 같습니다. 위와 같은 문제를 해결하기 위하여 여러 복합적인 부품으로 이루어진 수량계의 유량 및 유속에 영향력이 있다고 보여지는 특정 부품 혹은 부위의 개선 및 개발로 해결할 수 있지 않을까 하는 의구심에 연구를 시작되었습니다. 유량 및 유속에 영향을 끼치는 유입부의 스트레이너, 내부 임펠러의 변경으로 성능검사에서 영향을 끼치는지를 유체역학 및 유동해석 등을 통하여 테스트 후 각각 단계 및 상황별 목업금형을 제작하여 현재 국내검사기준으로 진행되는 성능테스트인 기차테스트를 진행하였습니다. 먼저 수량계의 특성상 수량계 내부의 유량을 유체역학 및 유동해석으로 정확히 뽑아내는 것이 불가능하여 유입부 유출부의 유량의 흐름을 기준으로 유체역학 및 유동해석을 진행하였습니다. 테스트 후 그 결과 값으로 유입부의 스트레이너의 삽입 각도를 0°, 90°, 135°, 180°, 270°로 각각 제작하여 테스트를 진행하였으며, 내부 임펠러는 straight, SR, SL, SL R70, SL R60, R75, SR R65 형상으로 각각 제작하여 테스트를 진행하였습니다. 전반적으로 기존의 수량계보다 높은 성능을 보여주었으며, 특정 스트레이너의 삽입각도 및 임펠러의 형상에서는 기존보다 훨씬 유수율이 절감되는 결과값이 나왔습니다. 그로 인해 검사기준에 쉽게 부합할 수 있으며 물 사용량을 보다 정확히 계측하여 정확한 수도요금을 부과하여 국세 낭비로 인한 경제적 손실을 감소할 수 있을 것 같습니다.