• Environmental and Resource Economics Review
• /
• v.18 no.1
• /
• pp.105-138
• /
• 2009

This study investigates the spatial distribution of the degree of water pollutants in Han River using data obtained by the water pollution observation stations. This study estimates a non -parametric kernel density function for each water pollutants, and tests a significant difference between two estimated distribution functions. Next, Generalized Entropy inequality indices are evaluated and this research tests difference of inequality indices between two years using bootstrapping method. Lastly in a dynamic of view, it is analyzed that there are significant changes in the ranking of water pollution level. Estimation results show that the degree of inequality in spatial distribution of water pollution tends to be stable or decreasing for last 15 years in a great part of water pollutants, and ranking of water pollution level hardly changes in Han River.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.185-188
• /
• 2008

This paper introduces the Bootstrap method for statistical analysis of noise and vibration spectrum in aeronautic and space fields. Generally, all components of a launch vehicle and its payloads are subjected to high intensive noise and vibration environment during the lift-off phase and the ascent phase through Mach =1 and Max Q. In order to verify their survivabilities against these severe vibroacoustic environments during qualification tests and acceptance tests, it is most important to estimate the proper upper limits of the environmental condition. Although NASA has typically utilized the Normal Tolerance Limit method in deriving these levels, the reference[1] says that the Bootstrap can be also an alternative method to estimate the maximum expected environments. In this paper, a general procedure of the Bootstrap method is summarized, and it is applied to analyze acceleration power spectral density functions, which were measured during acoustic test on the upper stage of KSLV-I.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.564-569
• /
• 2013

The current embedded devices are growing rapidly in the multi-core, and these demand fast boot time. But method of previous boot uses core only one. The method includes parallel techniques and modification of CPU Frequency policy. Parallel methods, after analyzing the Android boot process with analysis tool, applied to location where a lot of CPU operation. CPU Frequency policy is modified for high performance of core. The proposed method was applied to S5PV310 dual core and Exynos4412 quad core embedded system. As a result of the experiment, we found that the proposed method makes boot time fast about 20.71% and 31.34% in dual core and quad core environment as compared with the previous method.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1444-1445
• /
• 2008

최근 Wireless Local Area Network(WLAN), Wide-band Code Division Multiple Access(WCDMA), CDMA2000, Bluetooth 등 다양한 모바일 통신 시스템에 대한 수요가 증가하고 있다. 이와 같은 모바일 통신 시스템에는 70dB이상의 SFDR(Spurious Free Dynamic Range)을 가진 ADC(Analog-to-Digital Converter)가 사용된다. 본 논문에서는 모바일 통신 시스템을 위한 SFDR 70dBc의 성능을 제공하는 10비트, 100Msps 파이프라인 ADC를 제안한다. 제안한 ADC는 요구되는 해상도 및 속도 사양을 만족시키기 위해 3단 파이프라인 구조를 채택하였으며, 입력단 SHA(Sample and Hold)회로에는 Nyquist 입력에서도 10비트 이상의 정확도로 신호를 샘플링하기 위해 부트스트래핑 기법 기반의 샘플링 스위치를 적용하였다. residue amplifier 회로에는 전력을 줄이기 위해 8배 residue amplifier 대신 3개의 2배 ressidue amplifier를 사용하였다. ADC의 높은 사양을 만족시키기 위해서는 높은 이득을 가지는 op-amp가 필수적이다. 제안한 ADC 는 0.18um CMOS 공정으로 설계되었으며, 100Msps의 동작 속도에서 70dBc 수준의 SFDR과 60dB 수준의 SNDR(Signal to Noise and Distortion Ratio)을 보여준다.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.117-120
• /
• 2008

Numerical simulations and experiment of a hydrodynamic and thermally developed turbulent flow through square ducts (3.0 ${\times}$ 3.0 cm) with twisted tape inserts and with twisted tape inserts plus interrupted ribs are conducted to investigate regionally averaged heat transfer and friction factors. Turbulent swirl flows having Reynolds numbers ranging from 8,900 to 29,000, a rib height-to-channel hydraulic diameter(e/D$_h$) of 0.067, and a length-to-hydraulic diameter(L/D$_h$) of 30, are considered. The square ribs are arranged to follow the trace of the twisted tape and along the flow direction defined as axial interrupted ribs. The twisted tape has 0.1 mm thick carbon steel sheet with diameter of 2.8 cm, length of 90 cm, and 2.5 turns. Each wall is composed of isolated aluminum sections, and two cases of surface heating are set. The results show that uneven surface heating enhances the heat transfer coefficient over uniform heating conditions, and square ducts with twisted tape inserts plus interrupted ribs produces the best overall transfer performance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.5
• /
• pp.45-52
• /
• 2015

The read performance of hybrid hard disk is better than the legacy hard disk and power consumption is also considerably low. As blocks with enough localities may be located in the non-volatile cache whose size is generally limited, an effective block replacement scheme is required. As this replacement is inevitably affected by various parameters, we define this issue as a kind of multiple criteria decision model. To solve this problem, this paper suggests a new block replacement algorithm based on the analytic hierarchy process. Through simulation for our model, we confirmed that the proposed model could be used as a replacement algorithm of the hybrid hard disk as it may improve boot time as well as response time of general applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.773-776
• /
• 2006

This paper has implemented a tour guide terminal using the embedded linux. The implemented terminal can locate its position using GPS interface and display the sightseeing information of the current location. With view of this implementation results, we confirmed the possibility of embedded linux terminal as a tour guide PDA. The realtime update of sightseeing information using a mobile communication functionality will be included in our future works.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1887-1894
• /
• 2010

This paper proposes a new switched-capacitor sigma-delta modulator for automotive radars. Developed modulator is used to perform high-resolution analog-to-digital conversion (ADC) of high frequency band signal in a radar system. It has supply voltage of 2.7V, and has body-effect compensated switch configuration with low voltage and low distortion. The modulator has been implemented in a $0.25{\mu}m$ double-poly and triple-metal standard CMOS process, and it has die area of $1.9{\times}1.5mm^{2}$. It showed better total harmonic distortion of 20dB than the conventional bootstrapped circuit at the supply voltage of 2.7V.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.901-906
• /
• 2006

In this paper, we describe the implementation of the digital photo frame system that displays the images coming through the memory card of a digital camera. Each image can be recorded with voice in this system, and a function of the mp3 player is implemented as well. We use Intel PXA255 to control the system and modify the bootloader and linux kernel. Also we adapt device driver for this system. For the realization of image display, voice recording and mp3 playing in the basis of the linux system, we program some of the Microwindows system configuration files and program applications here. This study will be a good example to access the development of the digital photo frame based on the linux system using less-power and high performed embedded processor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2298-2305
• /
• 2007

Many people is studying the embedded system. The embedded system becomes a small size device. The DOM memory is using in the mobile device and small site devices. This paper proposes light-weighted Linux O.S that is running onto the DOM memory. The embedded system with the DOM must have a light-weigthed O.S due to the memory space restriction. This paper designs light-weigthed Linux O.S for the DOM memory. The new designed LILO boot loader boots the new designed light-weigthed Linux O.S as a normal Linux O.S. This paper experiments comparing the designed new light-weigthed Linux O.S with a Linux PC.