• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.4
• /
• pp.365-384
• /
• 2024

The development of scanning technology is accelerating for safer and more efficient automated inspection than human-based inspection. Research on automatically detecting facility damage from images collected using computer vision technology is also increasing. The pixel size, quality, and quantity of an image can affect the performance of deep learning or image processing for automatic damage detection. This study is a basic to acquire high-quality raw image data and camera performance of a mobile tunnel scanning system for automatic detection of damage based on deep learning, and proposes a method to quantitatively evaluate image quality. A test chart was attached to a panel device capable of simulating a moving speed of 40 km/h, and an indoor test was performed using the international standard ISO 12233 method. Existing image quality evaluation methods were applied to evaluate the quality of images obtained in indoor experiments. It was determined that the shutter speed of the camera is closely related to the motion blur that occurs in the image. Modulation transfer function (MTF), one of the image quality evaluation method, can objectively evaluate image quality and was judged to be consistent with visual observation.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.331-340
• /
• 2000

The existing two-phase biological fluidized bed has some problems such as limit of oxygen transfer and blockade of fluidized distributor. In this study, three-phase swirl flow biological fluidized bed has designed to solve the problems and to investigate its running characteristics. TOC of influent synthetic wastewater was approximately $70mg/{\ell}$. HRT of reactor was 1.6 hours. Mean particle size of sand, as packing media, was 0.397mm and packing volume was varied from $200m{\ell}/{\ell}$ to $600m{\ell}/{\ell}$ by stages in the bed. The amount of biomass and effluent water quality was throughly investigated in the bed. Showing experiment results from the above conditions, it was possible to solve the problems of existing fluidized bed and to keep DO of $3mg/{\ell}$ or more. And it was also TOC removal rate of 91 to 94 %, MLVSS of 2,360 to $3,860mg/{\ell}$, MLVSS per g-media of 8.4 to 17.3 mg/g, F/M ratio of 0.59 to $1.04kg-TOC/kg-MLVSS{\cdot}day$, biofilm thickness of $35{\sim}71{\mu}m$ and sludge productivity of 1.03 to $2.35kg-SS/m^3{\cdot}day$. Optimal conditions in this experimental were as follows.; those were biofilm thickness of approximately $54{\mu}m$. MLVSS per g-media of 13 mg and media packing volume of 350 to $400m{\ell}/{\ell}$ when F/M ratio was low, treatment efficiency was high and sludge productivity was low. Showing the media with optics microscope in this optimal condition, attached microbes such as Epistylis sp. were observed. From SEM photographs, it showed that Coccus adhere to and grow on the media surface.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.815-824
• /
• 1997

The purpose of this study is to develop the basic algorithm for the finite element method modeling of individual malocclusions. Usually, a great deal of time is spent in preprocessing. To reduce the time required, we developed a standardized procedure for measuring the position of each tooth and a program to automatically preprocess. The following procedures were carried to complete this study. 1. Twenty-eight teeth morphologies were constructed three-dimensionally for the finite element analysis and saved as separate files. 2. Standard brackets were attached so that the FA points coincide with the center of the brackets. 3. The study model of a patient was made. 4. Using the study model, the crown inclination, angulation, and the vertical distance from the tip of a tooth was measured by using specially designed tools. 5. The arch form was determined from a picture of the model with an image processing technique. 6. The measured data were input as a rotational matrix. 7. The program provides an output file containing the necessary information about the three-dimensional position of teeth, which is applicable to several finite element programs commonly used. The program for a basic algorithm was made with Turbo-C and the subsequent outfile was applied to ANSYS. This standardized model measuring procedure and the program reduce the time required, especially for preprocessing and can be applied to other malocclusions easily.

• Korean Journal of Environment and Ecology
• /
• v.31 no.6
• /
• pp.485-491
• /
• 2017

This study examined the germination characteristics by collecting fruits and pretreatment of the diaspore from April 2014 to June 2015 to investigate the diaspore characteristics, seed dispersion, and seed germination characteristics of two myrmecochorous spring ephemerals (MCSE): -Jeffersonia dubia (Jb) and Corydalis remota (Cr)-. The diaspore of Jb was about 5mm-long yellow-dark brown, oblong seeds with the attached amorphous white elaiosome. The mean weights of diaspore, seed, and elaiosome were 15.86mg, 13.46mg, and 2.40mg, respectively, and the elaiosome ratio was 15.13%. The diaspore of Cr was about 1.2mm diameter and glossy black ovoid seeds with the attached white spatula-shaped elaiosome. The mean weights of diaspore, seed, and elaisome were 2.58mg, 2.05mg, and 0.53mg, respectively, and the elaiosome ratio was 20.54%. Camponotus niponensis and Formica japonica transported the diaspore of Jb while Formica japonica and Lasius japonicus transported the diaspore of Cr. The germination percentage of Jb seeds was statistically significant and had the significance level of 1% with the pretreatment and date of sowing. However, it was independent of attachment of elaiosome. The mean germination percentages of Jb seeds was 65.0% during sowing on June 20, 17.5% during sowing on August 19, and 0% during sowing on October 20. The germination percentage of Cr was statistically significant and had the significance level of 5% and 1% with the attachment of elaisome and date of sowing, respectively. The mean germination rates were 54.17% and 35.0% in the non-treatment section and the treatment section with elaisome detached, respectively. The mean germination percentages of Cr seeds was 75.0% during sowing on June 20, 53.75% during sowing on August 19, and 5.0% during sowing on October 20. Considering the fact that the ants transported the diaspores to the ant house when the fruits of MCSE were ripened and dropped the seeds, the direct seeding right after collecting may be most suitable to the characteristics of the evolution of these plant species and may be the best method to obtain the highest germination percentages. Since the ants distribute their seeds, the MCSE produces and attaches the elaiosome to the seed to maintain the symbiotic relationship with ants. The ants then transport the seed to the ant house where the environment is controlled for suitable temperature and humidity, and then the MCSE succeeds in germination after the embryo grows sufficiently in the next spring.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.613-625
• /
• 1999

The purpose of this study was to compare the bracket shear bond strengths of the crystal growth solutions with those of the $37\%$ phosphric acid etch technique. The 4 crystal growth solutions were made experimentally in the lab, that is, (1) $30\%$ polyacrylic acid solution containing 0.3 M sulfuric acid (ES 1), (2) $30\%$ polyacrylic acid solution containing 0.6M sulfuric acid (ES 2), (3) $30\%$ polyacrylic acid solution containing 0.3 M sulfuric acid and 0.6 M lithium sulfate(ES 3), and (4) $30\%$ polyacrlic acid solution containing 0.3 M sulfuric acid and $5\%$ phosphoric acid(ES4). The $37\%$ phosphoric acid solution used as a control. Bovine lower incisor tooth enamel was treated by the above solutions for 60 sec, washed out for 20 sec with slow water stream, and bonded lower anterior edgewise bracket with the light curing orthodontic composite resin adhesives. The teeth bonded brackets were stored in the distilled water at room temperature for 24 h, and followed to test the bracket shear bond strength. The acid etch technque showed 177.6 kg/$cm^2$ of mean shear bond strength which was the highest among the enamel treatment solutions. ES 1 shown 58.4 kg/$cm^2$ of mean shear bond strength and that of ES 4 showed 66.5 kg/$cm^2$. There was no significant difference between the two(p>0.05). ES2 showed 110.6kg/$cm^2$ of mean shear bond strength which was $62.3\%$ of that of acid etch technique. ES 3 showed 131.1 kg/$cm^2$ of mean shear bond strength which was the highest among experimental crystal growth solutions and which was $74\%$ of that of acid etch technique. The shear bond strengths of the crystal growth solutions were significantly lower that that of acid etch technique(p<0.05). The results sugest that although bracket shear bond strength of $30\%$ polyacrylic acid solution containing 0.3M sulfuric acid and 0.6 M lithium sulfate were showed the highest, it is low for the clinical application of this solution.

• Journal of Embryo Transfer
• /
• v.22 no.2
• /
• pp.115-119
• /
• 2007

This study was carried out to investigate the effects of hormones (progesterone, and combination of progesterone and estradiol) on the reproductive performance of dairy cattle. The intravaginal CIDR was inserted in the vagina of cow on day 14 post-insemination to stimulate progesterone secretion with and without estradiol. The CIDR was removed on the day of next expected estrus. The cows for control group were not treated with CIDR or hormones. Conception rate, estrus interval, estrus intensity and serum progesterone were measured. Conception rates in control, CIDR without estradiol and CIDR treated cows were 15.4, 38.9 and 60%, respectively. Estrus interval in cows treated with CIDR was 26.5 days compared with 37.1 and 48.5 days in control and CIDR without estradiol treated cows. Estrus signs were more intense in cows treated with CIDR compared with control and CIDR without estradiol treated cows. Pregnant cows treated with CIDR showed higher serum progesterone concentration than pregnant and non-pregnant cows in control group. Particularly, serum progesterone was significantly higher in CIDR treated pregnant cows compared to non-pregnant cows at days 1, 2 and 6 of gestation. It may be concluded from present results that CIDR treatment is better than CIDR without estradiol to improve conception rate in dairy cattle.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.549-560
• /
• 2002

This study, including two in vitro experiments and an in vivo experiment were conducted to evaluate effects of Passtein$^{(R)}$ on crude protein degradability, ruminal fermentation characteristics and nutrient digestibility. In in vitro experiment protein degradability was examined using borate-phosphate buffer and neutral detergent, and using protease from Stroptomyces griseus at 39$^{\circ}C$ for 0, 2, 4, 8, 12, and 48 h. In addition, an in vivo experiment was conducted in a switch back design and ruminal fermentation and nutrient digestibility were determined. Four ruminal-fistulated Holstein cows weighing 300kg in mean body weight randomly allotted to 2 treatments (control and Passtein$^{(R)}$ supplementation). Although there was no significant difference on protein fraction between treatments, it appears that Passtein$^{(R)}$ supplementation decreased buffer soluble protein fraction compared to control. Protein degradability was not affected by Passtein$^{(R)}$ from 0 h to 4 h, but decreased at 12 h and 48 h compared to control. Degradation of immediately degradable fraction was higher in Passtein$^{(R)}$ treatment, but degradation of fermentable fraction was lower in Passtein$^{(R)}$ treatment compared to control. The pH and $NH_3$-N concentration tended to increase in Passtein$^{(R)}$ treatment, but VFA production, microbial counts and enzyme activity tended to decrease in Passtein$^{(R)}$ treatment compared to control. In addition, nutrient digestibility in the total tract tended to increase in Passtein$^{(R)}$ treatment compared to control.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.151-159
• /
• 2006

In these days, the importance of sludge treatment is emerging due to the London Convention, so this study was conducted to propose the alternatives for the improved sludge treatment on the organic wastewater and sewage sludge with JAR test and settling column equipped with stirrer. The minimum coagulant dosage to earn the optimum sludge settling efficiency resulted from 200mg/l and each critical sludge settling interface showed no distinct difference when PAC was dosed over 200mg/l. Accordingly, Clarification Rate(CR) with 200mg/l dosage was calculated to CR=(Ho-Ht) / Ho=1-0.4=0.6 because the critical sludge settling height stopped at 0.4. The settling velocity of sludge interface was decreased with the increase of MLSS concentration but rather increased with MLSS concentration over 1,000mg/l. This resulted from positive effect of interacted coagulation for floc formation by transfer to the zone of compressed settling when MLSS concentration increased over 1,000mg/l. The settling velocity of sludge interface showed $28.66{\times}10^{-3}/min$ for average settling velocity of sewage sludge which is 6.7 times higher than $4.25{\times}10^{-3}/min$ for average settling velocity of organic wastewater sludge. The increasing rate of CR for organic wastewater activated sludge was higher than that of settling velocity under 200mg/l of PAC dosage but settling velocity was higher than CR over 200mg/l of PAC dosage. However, in case of sewage sludge, the differential rate of CR was low when PAC dosage was increased but the settling velocity was suddenly increased with over 200mg/l dosage. Therefore coagulation effect was more efficient to MLSS settling velocity rather than SS removal effect in the supernatant.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.1
• /
• pp.1-10
• /
• 1995

Background: It has been well known that bronchial asthma is a chronic inflammatory disorder. The "activation" of lymphocytes has a significant role in the pathogenesis of bronchial asthma. Among these lymphocytes, TH2-like rather than TH1-like lymphoytes are activated in the bronchial tissues from patients with atopic bronchial asthma. However, the difference of cytokines expression is not well documented between the atopic normal subjects and atopic asthmatics. Methods: Bronchial tissues were obtained from the tweleve atopic and non-atpoic asthmatics and tweleve atopic and non-atopic healthy subjects for in stiu hybridizatin of IL-2, IL-4, IL-5, and INF-$\gamma$. The probe of cytokines were tagged with digoxigenin by random priming method. Results: The infiltration of many inflammatory cells on submucosa and denuded epithelium were observed in the bronchial tissue from patients with bronchial asthma. The RNase-treated bronchial tissues did not have the brown signal on the tissue, but, RNasc-untreated bronchial tissues had the positive brown signal on the inflammatory cells under the basement membrane. The IL-2 positive signals were detected in 2 cases, IFN-$\gamma$ in 1 casc, IL-4 in 2 cases, IL-5 in 2 cases among 6 non-atopic healthy subjects. The atopic healthy subjects showed 1 case of positive signal of IL-2 and IFN-$\gamma$, but did not show any signals of IL-4 and IL-5. The positive signals of IL-2 were detected in 4 cases among 6 atopic and 6 non-atopic asthmatics, 2 cases and 1 case of IFN-$\gamma$ respectively, 4 cases and 3 cases of IL-4 respectively, 4 cases and 3 cases of IL-5 respectively. Conclusion: The lymphocytes were activated in the bronchus of asthmatics. Among lymphocytes, TH2-like lymphocytes may be involved in the pathogenesis of bronchial asthma. However, futher study with immunohistochemical stain may be necessary for defining the source of cytokines, because of TH2-like lymphocytes were also activated in some atopic healthy subjects.

• Research in Plant Disease
• /
• v.12 no.1
• /
• pp.15-19
• /
• 2006

This study was carried out to know pathogenicity of the pathogen isolated in several location of Korea and penetration mechanism of the Pseudocercospora vitis ($(L\acute{e}v)$.) Speg. Inoculation tests at room temperature were performed on both sides of leaves with different isolates of the fungus. The typical symptoms appeared on the abaxial leaf surface, but no symptom was observed on the adaxial leaf surface with all isolates. The average incubation period was nine days, since all symptoms appeared from 8 to 10 days after inoculation. In order to know the mechanism of invasion of P. vitis to grapevine, the behavior of penetration hyphae through stomata were compared in two cultivars having different level of resistance. In order to know the mechanism of resistance of grape vine to P.vitis, two cultivars having different level of resistance were compared by counting the numbers and measuring size of the stomata per leaf. In a susceptible cultivar Campbell Early, the number of stomata was more than that of a resistance cultivar 'Kyoho'. In a susceptible cultivar 'Campbell Early', the fungus entered readily into stomata after inoculation. However, in a resistant cultivar 'Kyoho', the fungus seemed to pass over or surrounded only the guard cells. In comparison of height of guard cells of stomata between the two cultivars, significant differences were observed by scanning electron microscopy and light microscopy. The height of guard cells of 'Campbell Early' showed a little higher than those of 'Kyoho' known to be resistant to the fungus.