• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.509-516
• /
• 2016

A dental panoramic radiography which usually uses low level X-rays is subject to the Nuclear Safety Act when it is installed for the purpose of education. This paper measures radiation dose and spatial dose rate by usage and thereby aims to verify the effectiveness of radiation safety equipment and provide basic information for radiation safety of radiation workers and students. After glass dosimeter (GD-352M) is attached to direct exposure area, the teeth, and indirect exposure area, the eye lens and the thyroid, on the dental radiography head phantom, these exposure areas are measured. Then, after dividing the horizontal into a $45^{\circ}$, it is separated into seven directions which all includes 30, 60, 90, 120 cm distance. The paper shows that the spatial dose rate is the highest at 30 cm and declines as the distance increases. At 30 cm, the spatial dose rate around the starting area of rotation is $3,840{\mu}Sv/h$, which is four times higher than the lowest level $778{\mu}Sv/h$. Furthermore, the spatial dose rate was $408{\mu}Sv/h$ on average at the distance of 60 cm where radiation workers can be located. From a conservative point of view, It is possible to avoid needless exposure to radiation for the purpose of education. However, in case that an unintended exposure to radiation happens within a radiation controlled area, it is still necessary to educate radiation safety. But according to the current Medical Service Act, in medical institutions, even if they are not installed, the equipment such as interlock are obliged by the Nuclear Safety Law, considering that the spatial dose rate of the educational dental panoramic radiography room is low. It seems to be excessive regulation.

• Journal of Plant Biotechnology
• /
• v.34 no.4
• /
• pp.331-338
• /
• 2007

One-node stem pieces ca. 1 cm in length containing a axillary bud and a fully expanded leaf were obtained from it in vitro plants of potato (Solanum tuberosum L.). Leaves were removed and the nodes were cultured on the MS medium to investigate the effects of temperature, day length, sucrose, and CCC in microtuber formation and development. The fresh weight of microtubers after 80 days increased significantly at 8% sucrose and $20^{\circ}C$ compared with $28^{\circ}C$. The tuberization and development were reduced at $28^{\circ}C$ except short-day treatment of 8 hours at 8% sucrose. The fresh weight and diameter were increased on the culture medium added CCC 500 mg/L. The potato tuberization was promoted under short daylength, and it showed great effect by treatment with the CCC. Though the tuberization was promoted at low temperature of $20^{\circ}C$ in a histologic change of an axillary bud part cell of a potato, the cells were able to observe the swelling growth. Swelling growth of tissue was stimulated in the darkness and was more remarkable by addition of CCC. In particular, in the visual ratio of cell division for each position in the tissue, the cortex part showed larger ratio of cell expansion than that of the pith part. The effect of CCC was identified at 8% sucrose in the darkness. The effect of CCC was not showed in sucrose 3% under long daylength of 16 hours. As a result, the fact of a substance with AGPase important for starch composition was certified by the result with the inclose of AGPase activity on high concentration of sucrose, CCC, and dark treatment by which tuber formation and development are promoted.

• Economic and Environmental Geology
• /
• v.50 no.4
• /
• pp.303-311
• /
• 2017

The laboratory scale experiment was performed to evaluate the sealing capacity of the capping rock such as tuff and mudstone, measuring the intial supercritical $CO_2$ ($scCO_2$) injection pressure and the $scCO_2$-water-rock reaction for 90 days. The drilling cores sampled from 800 m in depth around the Janggi basin, Korea were used for the experiment. The mineralogical changes of mudstone and tuff were measured to evaluate the geochemical stability during the $scCO_2$-water-rock reaction at $CO_2$ storage condition (100 bar and $50^{\circ}C$). The rock core was fixed in the high pressurized stainless steel cell and was saturated with distilled water at 100 bar of pore water pressure. The effluent of the cell was connected to the large tank filled with 3 L of water and 2 L of $scCO_2$ at 100 bar, simulating the subsurface injection condition. The $scCO_2$ injection pressure, which was higher than 100 bar, was controlled at the influent port of the cell until the $scCO_2$ begin to penetrate into the rock and the initial injection pressure (> 100 bar) of $scCO_2$ into the rock was measured for each rock. The mineralogical compositions of mudstones after 90 days reaction were similar to those before the reaction, suggesting that the mudstone in the Janggi basin has remained relatively stable for the $scCO_2$ involved geochemical reaction. The initial $scCO_2$ injection pressure (${\Delta}P$) of a tuff in the Janggi basin was 15 bar and the continuous $scCO_2$ injection into the tuff core occurred at higher than 20 bar of injection pressure. For the mudstone in the Janggi basin, the initial $scCO_2$ injection pressure was higher than 150 bar (10 times higher than that of the tuff). From the results, the mudstone in Janggi basin was more suitable than the tuff to shield the $scCO_2$ leakage from the reservoir rock at subsurface.

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.83-94
• /
• 2005

The objective of the study was to elucidate early life history of Rhinogobius brunneus, based on laboratory observations and field works, along with its courtship and spawning behaviors. The male and female fish matured were sampled for the lab experiments from Gap-Stream, which is one of the tributaries of Geum-River, Korea. The spawning behaviors and courtship of matured adults had a typical pattern; matured males of Rhinogobius brunneus built up spawning nests and had their own territory before the spawning, and the behavior then triggered the egg spawning of female with active courtship. The females attached elliptic egg mass as a single layer, on the stones below the spawning nest. After the spawning, the egg mass was guarded by males only until the hatching. The size of egg fertilized, measured by microscope was about 1.5${\pm}$0.1mm in length and 0.7${\pm}$0.1 mm in the egg's width. According to the lab experiments conducted under four temperature regime, the lapsed time for the hatching was shortened as temperatures increased in the treatments. On the contrary to the hatching time, the average length of newly hatched larvae showed a reverse relation with water temperature. The larvae, considered a final stage of the early life history was about 3.6 mm in total length for water temperature of $18^{\circ}C$, whereas they were between 3.1 mm and 3.2 mm for over $25^{\circ}C$. This indicates that higher water temperature may decrease the growth rate in the early life history. These results may provide valuable information for the population conservation and ecosystem protection under accelerated water pollution and habitat degradations in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.149-154
• /
• 1992

Buckwheat has been a popular favorite food crop in Korea for a long time. The objective of the study was to investigate the effects of climatic conditions and cultural methods on grain yields of summer buckwheat variety Sinnong 1 planted during the spring season in Suwon, Korea from 1989 to 1991. Frost minimum temperature of late April was -0.3$^{\circ}C$ in 1990 being very low as compared with 3.7$^{\circ}C$ of the normal year, and affected early growth of the seedlings emerging from the soil surface. In late May of 1990, the frost minimum temperature was 7.3$^{\circ}C$ being low as compared with 8.8$^{\circ}C$ of the normal year, and also induced cold injury to fertilization and grain filling. Total precipitation 374.5mm of mid and late June, 1990 provided serious damage to the grain filling and maturing buckwheat seeds and along with causing seed sprouting before harvest. However, the climates of 1989 and 1991 were very good for the growth and development of spring-sown buckwheats. When summer buckwheat cultivar Sinnong 1 was planted on April 20, 1989, its highest grain yields 268-292kg /10a were harvested from the plots of seeding rate 8kg /10a, drill seeding and polyethylene film mulching, and the mean grain yield of the plots was 238kg /10a in 1989, but 64.3kg in Suwon, and 40.2kg /10a in Muan in 1990. In 1991 maximum grain yield 277kg /10a was produced from the April 15 planted and vinyl-mulched plot, and 255kg /10a from the April 25 planted and non-mulched plot. Herbicide Alachlor-sprayed plots produced lower grain yields than no weed control and manual weeding plots. Mechanized drill-seeding saved 83～84% in planting hours as compared with manual broadcasting 21.6 hours /ha, and produced 9% more in grain yields from the two-season croppings of mechanized drill-seeding culture being 364kg /10a in total yields per year.

• Journal of Oral Medicine and Pain
• /
• v.38 no.1
• /
• pp.53-67
• /
• 2013

This study was aimed to evaluate the masticatory efficiency after botulinum toxin type A (BTX-A) injection during 12 weeks using objective and subjective test. Also, we compared the difference of masticatory efficiency between group that injected into the masseter muscle only (M-group) and group that injected into the masseter and temporalis muscle (M-T group). The mixing ability index (MAI) was used as the objective indicator, and visual analogue scale (VAS) and food intake ability (FIA) index were used as the subjective indicators. It was concluded that masticatory efficiency was significantly lowered after a BTX-A injection into the masticatory muscle, but it gradually recovered in a predictable pattern by the 12 weeks. The disturbance of subjective masticatory efficiency was lasted longer than objective masticatory efficiency. The masticatory efficiency was lower in M-T group than M group. It was statistically significant in the VAS and FIA at 4 weeks, but the MAI showed no significancy. After 4weeks, there was rapid recovery of muscle function in M-T group, and the difference between two groups was not significant. It could be concluded that there will be no serious disturbance of mastication compared to injection is done only into the masseter muscle, even if injection is done into the masseter and temporalis muscle in dose of this study. According to the food properties, it was confirmed that people feel more discomfort on taking hard and tough foods after BTX-A injection and not only hard foods, but also intake of soft and runny foods were influenced by botulinum toxin injection.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.43-53
• /
• 2009

Objective: The purpose of this study was to compare the difference in three dimensional tooth movement using three different wire sizes($0.018{\times}0.025-in,\;0.016{\times}0.022-in$ 0.016-in) on a NiTi scissors-bite corrector. Methods: Computed tomography(CT) images of the experimental model before and after tooth movement were taken and reconstructed into three dimensional models for superimposition. The direction and the amount of tooth movement were measured and analyzed statistically. Results: The lingual and intrusive movements of the crown of the maxillary second molar were increased as the size of the NiTi wire increased. The roots of the maxillary second metals moved buccally except for the 0.016-in group. The intrusive movement of the roots of the maxillary second molars was increased as the size of the NiTi wire increased. Due to the use of orthodontic mini-implants, anchorage loss was under 0.2 mm on average. Conclusions: The $0.018{\times}0.025-in$ NiTi wire was most effective in lingual and intrusive movement of the maxillary second molar which was in scissors-bite position. Indirect skeletal anchorage with a single orthodontic mini-implant was rigid enough to prevent anchorage loss.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.121-134
• /
• 1976

There are many evidences that vaiious plant pathogenes were introduced with imported plants and agricultural productsrfrom foreign countries and caused heavy losses of domestic economic plants, ever since the early twentieth century when our country began to trade plants and agricultural products with foreign countries. There are many ways that foreign plant pathogenes have been introduced into our country, but the main route is considered to be imported plants and agricultural products contaminated with plant pathogenes. Plant quarantine which prevent effectively introduction of plant pathogenes from abroad was practiced for the first time in our country in 1912, and that is relatively earlier activity in the history of plant quarantine of the world. Several plant pathogenes have been introduced into our country even after plant quarantine had been practiced. Particularly for about 15 years, from the 2nd World War to 1961 when the law of Plant Protection was enacted and practical works of plant quarantine was reoperated, Korean agriculture was opened to various foreign plant pathogenes as a lapse period of plant quarantine in our country. Introduced plant pathogenes are, for the most part, from Japan because of depending upon Japan in the foreign trade of plants and agricultural products of our country. As present plant quarantine is required more exactness and rapidness, reasonable organization of quarantine system including more trained quarantine specialists, modernized facilities and introduction of improved quarantine techniques are necessary. Reasonable organization and improvement of plant quarantine system are important not only for protection of korean agriculture to plant pathogenes possible to be introduced from foreing countries, but also for increasing and stabilization of export of plants and agricultural product of our country.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.206-225
• /
• 2019

This paper examines the trade and development aspects of glass mirrors through the literature records of the Joseon Dynasty, and studies the characteristics of existing glass mirror crafts by referring to the terms and types shown in the literature. The glass mirror in the records had called western mirrors(西洋鏡, 洋鏡), glass mirrors(玻璃鏡, 玻瓈鏡), stone mirrors(石鏡), etc. Glass mirrors were imported mainly through trade with Russia and the Qing Dynasty since the 17th century and were banned from importation in the late Joseon Dynasty. These mirrors were something new that caused a great stirring in Joseon society in the 18th century, and in the 19th century, it grew larger as a commodity needed for everyday life, especially with trade with Japan. At that time, glass mirrors were used for various purposes, such as installing large glass at a store, which were not the standard mirror usage of confirming one's appearance. These mirrors surprised Koreans in Joseon who experienced them at Yanjing Liulichang(燕京 琉璃廠) in the 18th and 19th centuries. As a result, the demand for glass mirrors rapidly increased and quickly surpassed that of bronze mirrors. Consequentially, new crafts using glass mirrors instead of bronze mirrors in Joseon began to be produced and used after the 18th century. In particular, integrated flat boards of glass mirrors were developed as crafts used indoors. It was convenient to use the hair comb box, a long-time presence in Joseon society, with the bronze mirror. This kind of mirror remained apparent in various genre paintings, including the Taepyeong Seongsido(太平城市圖, 'A Thriving City in a Peaceful Era') collected the National Museum of Korea which reflect its populism of the times. Also, the Mirror Stand(鏡臺) used in the Qing Period was produced in Joseon, but there was a difference in the way of making the drawers and box shapes between two nations. On the other hand, the Face Mirror(面鏡) was made to look at the face. Various crafts made with the aesthetic sense of Joseon, such as the ox horn inlaying craft technique, were produced with auspicious designs. In the 19th century, glass mirrors were imported from European countries, such as France, Denmark, the Netherlands, and the United Kingdom, however after the end of the 19th century Japanese crafts were popular. Glass mirrors, which were popular in the Meiji and Taisho eras of Japan, were imported and also the Mirror Screen(鏡屛) using large glass mirrors were used. In particular, the mirror screen had developed wood furniture since the previous time, which were used for banquets and large spaces, such as the drawing room, and were imported from China and Japan. In addition, the western architectural effect of attaching a mirror to the wall was also attempted to adjust the brightness of the space and introduce another image and scenery in the mirror. This was done at Deoksugung Palace's Seokjojeon.

• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.46-56
• /
• 2018

The paper relates to a study on the conduction heat transfer characteristics according to the heating temperature of lightweight panel wall material. Plywoods, marbles, heat resistant glasses, as well as general gypsum board and fire-proof gypsum board, which have been widely used for lightweight panel wall material, were selected as experiment samples, and heating temperatures were set as $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. Next, each of the heating temperatures were introduced on the bottom part of the wall material for 30 minutes, and analyses were made on the heat transfer characteristics to the backside part on the top part through conduction. As results of the experiment, the maximum backside temperatures were measured up to $190^{\circ}C$ for a general gypsum board, $198^{\circ}C$ for a fire-proof gypsum board, $189^{\circ}C$ for a plywood, $321^{\circ}C$ for a marble, and $418^{\circ}C$ for a heat resistant glass as heating temperatures were introduced maximum of $600^{\circ}C$. In addition, the maximum change rate of conduction heat transfer were measured up to 85 W for a general gypsum board, 95 W for a fire-proof gypsum board, 67 W for a plywood, 1686 W for a marble, and 3196 W for a heat resistant glass as the maximum heating temperatures were introduced up to $600^{\circ}C$. Also, carbonization characteristics of the wallpapers were measured to visually check the danger of conduction heat transfer, and the results showed that smokes were first generated on the attached wallpapers for the heating temperature $600^{\circ}C$, which were 1021 s for a general gypsum board, 978 s for a fire-proof gypsum board, 1395 s for a plywood, 167 s for a marble, and 20 s for a heat resistant glass, and that the first generation of carbonization were 1115 s for a general gypsum board, 1089 s for a fire-proof gypsum board, 1489 s for a plywood, 192 s for a marble, and 36 s for a heat resistant glass.