• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.53-56
• /
• 1997

Tonpilz 압전변환기에 관하여 유한요소법을 사용하여 공기중의 동특성 해석과 수중의 방사임피던스를 해석하였다. 공기중에서 트랜스듀서의 구조를 변화시키면서 입력 어드미턴스 특성과 진동모드를 해석하여 압전변환기를 모델링하였다. 음향 윈도우를 압전변환기 전면에 부착한 후 유한요소법(FEM)에 의하여 매질의 영향을 고려한 입력어드미턴스 특성을 해석하였으며, 또한 방사임피던스 계산 루틴을 추가하여 무한 배플의 경계조건하에서 방사 임피던스를 해석하였다. 공기중과 수중에서의 해석을 통하여 Tonpilz 압전변환기 단일 소자의 구조 변경 및 기계 부재의 추가등에 따라 변동하는 변환기의 특성 및 방사 임피던스를 해석하므로서 평면 배열형 음향 트랜스듀서의 설계에 필요한 파라메터를 구할 수있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.441-443
• /
• 2009

Piezo Film Sensor를 이용하여 팔뚝의 상완 동맥에서 맥박 측정을 위한 센서부 최적 구조에 관한 연구를 하였다. 탈부착이 쉬운 팔뚝형 밴드 형태에 Piezo Film Sensor를 삽입하여 생체 신호를 측정 하였다. 센서부의 최적 구조를 알기 위해서 센서패드 구조물의 형태에서 매질 및 두께를 변화시켜 가면서 생체 신호의 크기를 비교하였다.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.95-101
• /
• 2003

Ultrasonic transmitter used for scale prevention in boiler or heat exchanger is composed of the magnetostrictive material which transforms electric energy into ultrasonic wave and the horn which amplifies generated ultrasonic wave and transfers it into medium loaded. In this paper, we have performed the shape design for magnetostrictive material and analyzed a few type of horns which amplify generated ultrasonic wave and found each solution theoretically. Final length of the horn has been determined by measuring the sound pressure in medium between theoretical value and experience data. At last we have given the results of our study for the effects of ultrasonic wave irradiated by manufactured ultrasonic transmitter on preventing scale deposition on test pipe under the similar condition to boiler.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.210-213
• /
• 1993

The purpose of this research was to investigate fluidization characteristics of three solid particles, correlations between voidage and superficial velocity. The inside diameter of a column did not affect the fraction void-superficial velocity relationship for fluidization systems which was obtained as follows: $\frac{u}{u_t}={\varepsilon}^{3.703}----Sea\;Sand$ $\frac{u}{u_t}={\varepsilon}^{3.5665}----long\;Exchange$ $\frac{u}{u_t}={\varepsilon}^{4.066}----GAC$ And the sphericial type media is good for fluidized systems as it maintains low voidage. Actually, if biofilm attached to media (bioparticle), the density became lower in fluidized bed biofilm reactor. Therefore, as the density of media become higher, it is easy to maintain fluidized beds.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.273-281
• /
• 2007

This paper presented design for a dipole antenna operated at 900 MHz band RFID tag, and antenna performance varied by the sticked material was experimentally evaluated. When dipole antenna was sticked by the material having a difffrent electric characteristic such as dielectric material, fero-magnetic material and conductor, variations of antenna return loss and radiation pattern according to the sticked material kinds, size, and height between antenna and the sticked plate were experimentally observed and evaluated. When antenna was sticked by dielectric surface, the measured return loss and radiation pattern by affection of different dielectric permittivity ratio showed resonant frequency shift of about 40 MHz and relative attenuation of 1 dB to 3 dB. Even though frequency shift by size variation of the sticked plate was observed, the measured radiation pattern of dipole antenna located on the sticked plate was similar with one without backside plate. In the case of conductor or fero-magnetic material as the sticked ground plate, because of frequency shift and phase difference by distance between dipole antenna and the sticked ground plate, amplitude decrease of radiation pattern at 910 MHz was observed about 5 dB above.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.33-41
• /
• 2016

Radio Frequency Identification(RFID) can provide visibility and efficiency throughout the entire supply chain in fashion apparel and footwear. The technical analysis of RFID performance is necessarily required to create a sealess omni-channel service using customer experience. Especially, several tagged-item performance specifications, for example read range and multi-read rate, strongly depend on the attached material and real-operating environment. This paper suggests minimum performance requirements for RFID tags embedded inside a pair of shoes to negotiate tagged-item performance between retailers and suppliers.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.435-440
• /
• 2001

The purpose of this study was to evaluate mesh size and water velocity for the growth of filamentous periphytic algae(FPA). The growth experiment was carried out in the constructed pilot waterway system with nutrient-rich treated wastewater. Growth rate of FPA was highest at water velocity about 10 cm/s. The maximum standing crop of FPA was $253\;{\mu}g\;chl.a/cm^{3}$, and an average of the net productivity was $3.92\;mgDW/cm^{2}/day\;or\;25.3\;{\mu}g\;chl.a/cm^{2}/day$. Biomass development and growth rates of FPA were highest at the net with 20mm mesh size during the fall season and 10mm mesh size during the winter season.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.50.2-50.2
• /
• 2011

자동차용 CNG 연료탱크의 복합재료 중앙부 표면에 150 kHz 공진형 음향방출센서를 부착하고, 물을 매질로 하여 용기의 내압을 단계적으로 상승시켜 가면서 각 단계에서 일정시간 압력을 유지시키고 그 때 발생하는 음향방출신호를 획득하였다. 이 때 획득한 음향방출신호의 amplitude, count, duration 및 risetime 등과 같은 음향방출 변수들의 분포를 살펴본 결과 복합재료 압력용기의 손상메커니즘을 추정하고 손상정도를 평가하는데 유용하였다.

• The Microorganisms and Industry
• /
• v.17 no.2
• /
• pp.28-30
• /
• 1991

APM의 화학적, 효소적 합성방법의 선택은 각기의 장단점을 비교 검토한 후 결정해야 할 문제로서, 수율, 공정의 효율성, 작업환경, 경제성 등의 여러 요인이 영향을 줄 수 있으나, 최근의 연구동향 및 산업적 생산의 추이는 효소를 이용한 bioconversion process에 의한 방식으로 나아가는 듯 하다. 결론적으로 bioconversion process에 의한 APM의 생산은 반응매질로써 유기용매의 사용이 불가피하므로 효소의 안정성을 증가시켜 장기간 사용할 수 있는 신기술의 개발이 필요하며 기존의 고정화 기술은 그 좋은 예가 될 수 있다. 또한 보호기의 도입과 제거과정이 보다 용이해야하며 더 나아가서 보호기의 부착없이도 반응을 가능케하는, 기질에 대한 특이성이 높은 새로운 효소(예를 들어 exopeptidase를 사용하면 기질에 보호기를 붙일 필요가 없으므로 화학적 방법에 비해 훨씬 유리하다)의 screening이 절실하다. 아울러 유기용매로 인한 효소의 deactivation mechanism의 규명과 반응기 운전 system의 개발이 요구된다 하겠다.

• Journal of Energy Engineering
• /
• v.15 no.1 s.45
• /
• pp.35-44
• /
• 2006

This study experimentally investigates effect of boiling heat transfer when ultrasonic vibration was applied. Under the wall temperature condition, temperature distribution in a cavity was measured during the boiling process and heat transfer coefficient of convection, sub-tooled boiling and saturated boiling states were measured with and without ultrasonic vibration, respectively. Also, the profiles of the pressure distribution in acoustic field measured by a hydrophone were compared with the augmentation ratios of heat transfer calculated by local heat transfer coefficient. Result of this study, heat transfer coefficient and augmentation ratio of heat transfer is higher with ultrasonic waves than without one. Especially, augmentation ratio of heat transfer is more increased the convection state than sub-cooled boiling and saturated boiling states. Acoustic pressure is relatively higher near ultrasonic transducer than other points where is no installed it and affects the augmentation ratio of heat transfer.