• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.315-324
• /
• 2010

We developed a design chart for very large floating structures through intensive hydroelastic analysis. Using this chart, one can predict the hydroelastic response of very large floating structures preliminarily at design stage without the cost-demanding hydroelastic analysis. This paper presents two new design charts based on the theory of VLFS. The purpose of the first design chart is to determine RAOs of the maximum longitudinal stress of VLFS considering properties of waves and structures. The design chart I can be applied to any sizes of VLFS in same aspect ratios and dimensionless stiffness parameters. The second design chart is developed to take into account the actual wave condition by using the Bretschneider spectrum with Beaufort sea state.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.1
• /
• pp.1-10
• /
• 2024

As increasing demands for a floating structure expanded from offshore industry facilities to living facilities, it has emerged that necessity of techniques to reduce motions of a floating structure. This study present a floating structure with porosity on the outer surface of the floater. Under each regular and irregular wave, responses of the floater was investigated in frequency domain. The proposed structure is composed of inner and outer floaters, which are connected to each other and the outer wall is perforated, and the heave and the pitch of floaters with different perforation rates (0~30%) were compared with at both the center and the edge. The results showed that pitch responses can be decreased by increasing of perforation rate of the floater. Comparing with responses of the non-perforated floater, those of the proposed floating structure were reduced to above 10% and 2%, respectively for regular and irregular wave conditions.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.64-76
• /
• 1999

In this paper hydroelastic experimental techniques of very large floating offshore structures are suggested based on the model test carried out in the UOU Ocean Engineering Wide Tank. The prototype is a box-shaped floating structure with length of 300m, breadth of 60m, depth of 2m and draft of 0.5m and longitudinal bending rigidity as $4.87{\times}10^{10}kgm^2$. The scale ratio is 1/42.857. The model is realized by aluminum square pipes with the section dimension of $20mm{\times}20mm$. The numbers of longitudinal and transverse pipes are 7 and 35 respectively. Heave motions at selected points are measured with potentiometers and bending moments with strain gages.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.36-41
• /
• 2014

A floating offshore structure has high tendency to occur the buckling when compressive, bending and shear loads applied. When the buckling is occurred, in-plane stiffness of structure is remarkably decreased. And it has a harmful effect on the local structural strength as well as global structural strength. In the present study, it has been investigated the ultimate strength of tubular members which is located between a floater and a damping plate of the floating pendulum wave energy converter. Nonlinear finite element method is conducted using the initial imperfection according to 1st buckling mode which is obtained from the elastic buckling analysis. It is also noted the ultimate bending strength characteristic varying with a diameter, thickness and stiffeners of the tubular member.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.94-99
• /
• 2002

최근 들어 해양개발에 관심이 고조되면서 심해저의 진출이 늘어날 것으로 보이며 또한 환경에 미치는 영향 등으로 부유식 소파제의 이용이 늘어날 것으로 생각된다. 이러한 부유식 소파제는 고정식 방파제의 문제점을 상당히 해소할 수 있는 반면 아직까지 완전히 이해되고 해결되지 못한 부정적인 면도 가지고 있다. 이에 본 연구는 부유식 소파제의 설계시 이용 가능한 정보를 얻고자 부유식 소파제의 형상과 파수에 따른 투과율에 대해 원형과 사각형 그리고 catamaran을 비교하였으며 사각형에 있어서는 계류삭의 위치에 따른 차이점을 비교하였다. 또한 catamaran 부소 파제의 후면에 catamaran 구조물이 있는 경우 즉, Dual catamaran의 운동에 대해서도 고찰하였다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.35-44
• /
• 2002

In this paper, the analytic studies on the wave control performance of moored pontoon-type floating breakwater are presented. A two-dimensional eigenfunction expansion method is adopted to study the motion responses and the transmission coefficients of pontoon-type floating breakwater in beam waves. The stiffness coefficients of mooring line are idealized as linear elastic spring. Comparison of the analytical results with a numerical results (FEM) shows good agreement over a wide range of frequencies. The performance of mooed pontoon-type floating breakwater is tested with various design parameters such as sectional geometry, mooring line characteristics and wave frequencies. It is found that the properly designed floating breakwater can be an effective wave control structure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.928-936
• /
• 2022

According to the current status of marine accidents in Korea, the number of accidents is steadily increasing by an approximate average of 8.5% per year, and marine accidents are steadily increasing for ships and structures such as floating barges, tugboats, ferries and floating platforms except for fishing ships. In this study, domestic floating structures were classified according to the type of floating structure, and the regulation system and the scope of the application of floating marine structures were schematically illustrated according to related domestic laws such as the Ship Safety Act, Ship Act and Fishing Management and Promotion Act. In addition, considering the state of the marine environment, it was intended to discover structurally delicate parts and risk factors early in blinded safety spots in applying domestic regulations, and to derive effective improvement measures for the discovered risk factors.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.19-25
• /
• 2001

Structural design requirements for very large floating structures(VLFS) are different corresponding to this purpose and structural type. In this study, the structural design procedure of VLFS is described, composing of the following processes : construction of design conditions. choice of structural types and main materials, estimation of structural design loads, determination of structural arrangements, and scantling of structural members. As an example of practical application, the initial structural design of floating airport and container terminal for Pusan is demonstrated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5B
• /
• pp.313-320
• /
• 2012

A hybrid floating structure system combined with pontoon and semi-submersible type modules is proposed. This new system can reduce tensile forces of bottom slabs which could cause fatal damage of concrete floating structures. We performed a parametric study on the dimensions of this new system and investigate the sensitivity of the parameters to the behavior. In order to investigate various cases efficiently, we developed a simple two-step static analysis method for the fluid-structure interaction. An optimum system is derived from the investigation of the analysis results, weights and drafts of the hybrid structure. This study shows that introducing this new system to concrete floating structures is an effective way to reduce the tensile force of the bottm slab of such a floating structure. Also, it was found that when the length of the semi-submersible module is about 15%, the behavior would be optimal in the considered case.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.72-80
• /
• 2015

In this study, comparative analysis has been performed with regard to a bending stress and deformation at bottom slab of a concrete floating container terminal by live load distributions. In addition, a structural performance and behavior of the floating structure is considered using a numerical analysis. Through reviewed structural performance of a floating structure by live load distribution, the structure presented tensile behavior by two live load cases (A, B, D-type). Then, the other live load cases (C, E, F, G, H, I, J-type) shows compressive behavior. Especially, immoderately compressive stress was generated on bottom slab at specific load distribution. but, that should be decreased through controling buoyancy pre-flexion. Through reviewed structural behavior, slopes of structure by four live load cases (B, E, F, H-type) were exceeded in design criteria of mega-float. It should be estimated that it get out of the load case at loading container. In all, the present study can be considered as a benchmark of a floating container terminal in the absence of analysis and will be used to guide-line about serviceability of concrete floating container terminal.