• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.421-428
• /
• 2012

In this study, the effects of surface oxide film formation on the fatigue behavior of 7075-T6 aluminum alloy were analyzed in terms of the corrosion time of the alloy. The aluminum material used is known to have high corrosion resistance due to the passivation phenomenon that prevents corrosion. Aluminum alloys have been widely used in various industrial applications such as aircraft component manufacturing because of their lighter weight and higher strength than other materials. Therefore, studies on the fatigue behavior of materials and passivation properties that prevent corrosion are required. The fatigue behavior in terms of the corrosion time was analyzed by using a four-pointing bending machine, and the surface corrosion level of the aluminum material in terms of the corrosion time was estimated by measuring the surface roughness. In addition, fractographic analysis was performed and the oxide films formed on the material surface were studied by scanning electron microscopy (SEM). The results indicated that corrosion actively progressed for four weeks during the initial corrosion phase, the fatigue life significantly decreased, and the surface roughness increased. However, after four weeks, the corrosion reaction tended to slow down due to the passivation phenomenon of the material. Therefore, on the basis of SEM analysis results, it was concluded that the growth of the surface oxide film was reduced after four weeks and then the oxide film on the material surface served as a protection layer and prevented further corrosion.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.118-126
• /
• 2000

TMCP steel has been widely used to construct ships and offshore structures. When it comes to ship and offshore structures, corrosion fatigue damages caused by sea water and fatigue occurred by wave-induced forces usually go on occurring simultaneously. So the fatigue life in corrosion environment is decreased markedly in comparison with that in air. The fatigue crack in corrosion easily initiates on welded joints of structure like as the fatigue crack in air. Therefore it is very important to study the fatigue properties of those of their welded joints as well as steel plates. In this study, rotary bending fatigue tests have been performed to investigate fatigue crack initiation and behavior of fatigue crack growth on CO2 gas weld HAZ of TMCP steel. The fatigue test used the specimens with various stress concentration factors in air and 3% NaCl solution

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2014

Fatigue tests were performed in various simulated body environments reflecting various factors (such as body fluids, artificial saliva) relevant within a living body. First, the fatigue limit under a simulated body environment (artificial saliva) was evaluated and the governing factors of implant fatigue strength were looked into by observing the fracture mode. The fatigue life of an implant decreased in the artificial saliva environment compared with that in the ringer environment. Furthermore, in the artificial saliva environment, the implant fracture mode was fatigue failure of fixture as opposed to the abutment screw mode in the ringer environment. In the fatigue test, corrosion products were observed on the implant in the simulated body environment. A larger amount of corrosion products were generated on the artificial saliva specimen than on the ringer specimen. It is thought that the stronger corrosion activity on the artificial saliva specimen as compared with that on the ringer specimen led to an overall decrease of fatigue life of the former specimen. In the case of the implant with a nitrided abutment screw eliminated hardened layer (TixN), a several times increase in fatigue life is achieved in comparison with tungsten carbide-coated implants.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.397-401
• /
• 2000

The corrosion-fatigue characteristics of the 12Cr steel, which is widely used in fossil power plants as a turbine blade material, are evaluated nondestructively by use of the Rayleigh surface wave. In this study, the frequency dependency of the Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in the aged specimens, and then compared to the corrosion-fatigue characteristics. The width of the backward radiation profile decreases as the increase of the aging temperature, which seems to result from the increase of the effective degrading layer thickness. This parameter also shows an inversely proportionality to the exponent, m, in the Paris law which predicts the crack size increasement due to fatigue. The result observed in this study demonstrates high potential of the backward radiated ultrasound as a tool for the nondestructive evaluation of the corrosion-fatigue characteristics of the aged materials.

• Korean Journal of Environment and Ecology
• /
• v.13 no.4
• /
• pp.309-315
• /
• 2000

지리산국립공원 동부지역의 등산로 주연부식생 구조 및 훼손을 파악하기 위하여 7개 등산로를 대상으로 1999년 8월에 조사를 실시한 결과는 다음과 같다 등산로 상에 나타난 주연부식생의 주요 수종으로는 철쭉꽃 미역줄나무 조록싸리 등이었다 등산로 주연부의 종다양도 식생피도 개체수는 이용객 수와 깊은 상관관계는 없는 것으로 나타났다 입지환경별 드산로 주연부식생의 종구성은 남삼면과 북사면의 중복부에서 가장유사한 반면 동사면 상복부와 북사면 산록부간에 이질적이었다 한편 남, 북 사면간 등산로 주연부식생은 각 사면 산록부에서 종구성이 가장 이질적이었다 남.북사면의 중복부에서 조록싸리 철쭉꽃이 우세하였으나 북사면 상복부에서는 철쭉꽃이 우세하게 나타났다 등산로 주연부의 식생피도 능선부 남사면 북사면 동사면 순으로 높게 나타났다.

• 대한위암학회:학술대회논문집
• /
• 2002.04a
• /
• pp.9-17
• /
• 2002

위의 parietal cell 혹은 대식세포와 유사한 세포 내부에서 H. pylori가 발견된다는 보고가 있기는 하나 일반적으로 H. pylori는 Shigella와 같은 침습성 세균은 아닌 것으로 알려져 있다. 그럼에도 불구하고 H. pylori에 감염된 위점막에는 많은 수의 호중구를 위시한 염증세포의 침윤이 관찰되는데 H. pylori가 위상피세포에 부착 할 경우 위상피세포를 자극하여 interleukin-8을 위시한 cytokine 을 발현케하고 이에 의하여 호중구 등의 염증세포가 몰려들게 된다. 한편 고유층에 몰려든 호중구에서는 다시 interleukin-8을 위시한 일련의 호중구 활성화 chemokine을 분비하여 염증반응을 증폭해 나갈 것이다. 호중구에서 발현되는 myeloperoxidase나 활성 산소 등도 위점막의 조직 손상에 기여할 것이다. 위상피세포를 덮고 있는 점액층은 위상피세포를 보호한다고 알려져 있으나 H. pylori 감염의 경우 점액층에 의하여 H. pylori의 운동성이 증가하고 이것이 위상피세포로부터의 cytokine 발현을 자극하여 염증반응을 증폭하는데 관여할 가능성도 있다. H. pylori는 위상피세포에 대하여 apoptosis를 유도함과 동시에 고유층에 몰려든 호중구에 대하여는 apoptosis를 억제케하여 궁극적으로 염증반응을 증폭 및 지속시켜 나가는 쪽으로 작용한다. 한편 H. pylori는 위상피세포로부터 COX-2의 발현을 증가시키는데 이는 위상피세포의 apoptosis를 억제하는 방향으로 작용한다. 이외에 H. pylori의 urease에 의하여 발생한 암모니아나 H. pylori 자신이 분비하는 세포독소가 세포 손상을 유발할 가능성도 있다. 상술한 여러 독성 인자들 중 어느 하나가 단독으로 작용하기보다는 여러 인자가 같이 동시에 또는 시차를 두고 작용할 가능성이 많다고 생각된다.(\gamma-FeOOH)$, 침철광$(\alpha-FeOOH)$, 적금광$(\beta-FeOOH)$, 그리고 자철광$(Fe_3O_4)$이다. 인위적 부식에서는 전부 인철광의 부식물이 생성되었고 자연적 부식에서는 모두 침철광의 부식물이 생성되었다. 특히 철제 표면에 자연적으로 생성된 공식 녹을 XRD 분석한 결과 적금광으로 동정되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.TEX>$88\%$)였다.(P=0.063). 결론: 본 연구에서는 MTHFR C/T & T/T 유전자 다형성이 위암의 발생과 그 위치에 대해 관련이 있는 것으로 여겨지고, 흡연력, 음주력과는 관련이 없는 것으로 여겨진다.험이

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.451-460
• /
• 1989

This paper dealt with the effect of the ratios N2 to H2 gas on the corrosion fatigue failure behavior of ion-nitrided SM45C steel specimens. The specimens were water cooled after ion-nitriding at 500.deg. C for 3hrs in 5 Torr, 0.8N$_{2}$ and 0.5N$_{2}$ atmospheres. As the nitrogen concentration increases, the higher compressive residual stresses developed in the surface layer and the depth of nitrided layer increased, which in turn gave rise to increases in fatigue strength and corrosion fatigue life. In the region less than 1.5 * 10$^{5}$ cycles, fatigue failure initiated at the brittle nitrided case, whereas in the region higher than 1.5 * 10$^{5}$ cycles crack initiated from the non-metallic inclusions in the subsurface. The initiation of corrosion fatigue failure was mainly attributed to pitting of case hardened surface layer.

• Journal of Welding and Joining
• /
• v.1 no.2
• /
• pp.34-44
• /
• 1983

이 논문에서는 먼저 연강 모재에 대해서 여러 가지의 반복 속도로 대기 중과 해수 중 및 3% Nacl 용액 중에서의 피로시험을 실시하고, 피로 균열 발생수명 및 전파수명에 미치는 속도의 영향을 검사함과 동시에 피로수명의 추정법에 대해서 해설한다. 그리고 연강의 완전용입 용접 이음의 toe 부에 대하여 추정한 피로 균열 발생수명과, 파랑주기에 가까운 10cpm의 반복 속도에서 피로시험을 실시하여 구한 수명과를 비교한 결과에 대해서도 소개하고자 한다.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.363-368
• /
• 2024

Steel structures used in marine environments, such as ships, offshore structures or sub-structures in wind power generation facilities are prone to corrosion. In this study, the corrosion fatigue crack propagation characteristics due to the environmental load are examined by experiment at -1050 mV vs. SCE, which is equivalent to the anti-corrosion potential of zinc anodes that are widely used as sacrificial anodes. In this study, for this purpose, an experimental study is conducted on the effect of cathodic protection on the propagation of fatigue cracks in the seawater environment under the condition of -1050 mV vs. SCE, considering the wave period in synthetic seawater. Cathodic protection prevents corrosion; however, excessive protection generates hydrogen through chemical reactions as well as calcareous deposits. The fatigue crack propagation rate appeared to be faster than the rate in a seawater corrosion environment at the early stages of the experiment. As the crack length and stress intensity factor K increased, the crack propagation rate became slower than the fatigue crack propagation rate in seawater. However, the crack growth rate was faster than that in the atmosphere.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.57-69
• /
• 1997

The objetive of this study is to compare the mechanical proprties of 6000 series Al-Mg-Si aluminum alloy (AC120) with 5000 series Al-Mg aluminum alloy (TG25), and to investigate the influence of corrosion solution for fatigue life. Comparing of TG25 and AC120 alloy sheets, TG25 alloy sheets showing higher plastic ratio and total elongation have better formability than AC120 alloy sheets. The hardness of nugget area was a little higher than that of base metal area. Also, grain coarsening was observed in HAZ(Heat Affected Zone). In a corrosion fatigue experiment, the fatigue life decreased as concentration increased, when a dipping time was constant. The life decreased as dippling time increased, when a concentration was constant.