• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.206-206
• /
• 2003

현재, 메탈의 내부식성 코팅막 제조에 사용되고 있는 크로메이트 기반 코팅제는 유독성 물질에 대한 환경 규제에 따라 조만간 사용이 금지 될 예정이다. 본 연구에서는 이러한 유독성 금속 내부식성 코팅제를 대체할 새로운 코팅 재료로 부식 억제제가 결합된 수용성 졸을 제조하고 그 특성을 보고하고자 한다 부식 억제제가 결합된 수용성 졸은 부분 가수 분해된 GPS((3-glycidoxypropyltriethoxysilane)에 Zirconiumoxychlorideoctahydrate 혹은 cerium nitrate를 일정 양 첨가하고 이온 교환수에 희석하여 제조하였다. 이 코팅 졸을 아연 도금 강판에 딥 코팅법으로 코팅한 후 상온에서 건조하고, 80~15$0^{\circ}C$에서 열처리하여 염수 분무 시험으로 백청 발생 정도를 관찰하여 내 부식성을 조사하였다. 코팅막의 두께는 수직으로 절단한 면을 전자 현미경으로 관찰하여 측정하였으며, 표면의 경도는 연필 경도계로 조사하였다. 또한 코팅막의 부식 전위는 전기화학적인 방법으로 분석되어 부식억제제의 종류에 따른 효과도 정량적으로 비교되었다.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.495-501
• /
• 2011

The corrosion inhibitive nature of a flavonoid compound, 3-Hydroxy-7-methoxy-2-phenylchromen-4-one (HMPC), the synergistic effect between HMPC and n-Tetrabutylammonium bromide (TBAB) and their adsorption behavior on mild steel in hydrochloric acid solution were studied by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. The results of weight loss study at different temperatures revealed that the inhibition efficiency increases with inhibitor concentration and decreases with increase in the temperature of the system. The electrochemical studies showed that the inhibitor acts through mixed mode of inhibition and the inhibitor molecules adsorb on the metal - solution interface forming a protective layer. The adsorption of the inhibitor molecules over the metal surface was supported by the obeyed Langmuir's adsorption isotherm, Scanning Electron Microscopic analysis (SEM) and Fourier Transform Infrared (FT-IR) spectroscopic studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2306-2310
• /
• 2010

Corrosion is a complex series of oxidation/reduction reactions between at the water-metal surfaces and materials in which the water is stored or transported. With respect to the corrosion potential of drinking water, the primary concerns include the potential presence of toxic metals, such as lead and copper; deterioration and damage to the household plumbing, and aesthetic problems such as stained laundry, and bitter taste. This study was performed to evaluate the effects of corrosion inhibitors on corrosion rates, Fe and Cu release concentration in water distribution pipes. Decrease of corrosion rates were strongly related to phosphate corrosion inhibitors. Considering that typical corrosion processes consists of a series of electrochemical reaction at the metal surface in contact with water, corrosion rates were positively correlated with Fe release.

• Journal of the Korean Chemical Society
• /
• v.52 no.4
• /
• pp.434-438
• /
• 2008

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.311-316
• /
• 2009

Inhibition effects of alanine and methionine on the corrosion of aluminum were investigated in artificial sea water. Based on the low coverage of alanine and methionine we suggested that alanine and methionine adsorption process in aluminum surface is Langmuir isotherm and the carboxyl ion of amino acids seems to be adsorbed on Al.

• Journal of the Korean Chemical Society
• /
• v.59 no.2
• /
• pp.125-131
• /
• 2015

Inhibition effects of histidine (His), methionine (Met) on the corrosion of nickel were investigated in deaerated 0.5 M HCl and 0.5 M $H_2SO_4$ solution. All the inhibition efficiency for the nickel corrosion depended on the anodic inhibition. Amino acid adsorption process on nickel surface in the solution of HCl can be explained by modified Langmuir isotherm, however, in the solution of $H_2SO_4$ by Temkin logarithmic isotherm due to the interaction between the adsorbed molecules. The molecule of histidine dissolved in HCl-solution were physically adsorbed due to the electrostatic interaction between the surface of {$Ni-Cl^-$} and the {$-NH{_3}^+$} and {$-NH^+=$} of His. However the other cases of adsorption in this investigation can be explained by chemical adsorption between the empty d-orbital of Ni and the lone pair of electron in His and Met.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.325-333
• /
• 1998

Under the seawater environment, the reinforced concrete structure is deteriorated due to physical and chemical attacks. The main deterioration mechanism is the chloride corrosion of reinforcing steel. The corrosion inhibitors have been used to protect the rebars from corrosion which are susceptible to chlorides in concrete. However, there is not clear conclusion about corrosion inhibitors yet. In this study, it is made the accelerated experiment with 3 kinds of corrosion inhibitors for various chloride ingresses. It is estimated corrosion inhibitors that inhibitors by Half-Cell Potential, corrosion area ratio and weight loss ratio. It is concluded that inhibitors are not effective to corrosion inhibition for excessive chloride ingress. However, the effect of inhibition is directly proportional ot contents of corrosion inhibitors in some chloride ingress.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.907-910
• /
• 2008

Recently sewage facilities mainly consisted of concrete structures are being deteriorated seriously by biochemical reaction originated from sulfur-oxidizing bacteria. To prevent biochemical corrosion of the sewage concrete, antibiotics which inhibit growth of sulfur-oxidizing bacteria have to be developed and applied necessarily. In this study, we are going to introduce technology which biochemical corrosion of sewage facilities concrete could be controlled effectively by antibiosis of antimicrobial concrete

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.88-94
• /
• 2012

In this study, the current-voltage curves for metals were measured using cyclic voltammetry. The relationship between the electrochemical properties and surface states of metals were investigated by Scanning Electron Microscope (SEM). In cyclic voltammetry, we used a 3-electrode system for the electrochemical measurements. The measurement was conducted at the condition that consists of the first reduction from the initial potential to -1350 mV, continuous oxidation to 1650 mV, and last reduction to the initial potential. The scan rates were 50, 100, 150 and 250 mV/s. The results show the C-V characteristics of metals to be for an irreversible process, which was caused by the oxidation current from cyclic voltammogram, when monoethanolamine (MEA) was used as a corrosion inhibitor. When we used MEA as a corrosion inhibitor, the diffusion coefficient was decreased as the concentration of electrolyte was increased. In the SEM images of copper, we observed an increase of surface corrosion at the increased electrolyte concentration. Addition of $1.0{\times}10^{-3}M$ corrosion inhibitor MEA reduced the effect of corrosion prevention due to the relatively large diffusion coefficient at the electrolyte concentration of 0.1N.

• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.381-390
• /
• 2017

Desalination is the main focus of the stabilization of iron artifacts. However, drawbacks such as re-corrosion are noted due to the uncertainty in the elimination of the corrosive factors and artifacts. Several studies have been carried out on the effects of corrosion inhibitors to overcome these shortcomings. In this study, the effects of type 3 water treatment on corrosion inhibitors were investigated. Surfaces of samples that contained film corrosion inhibitors on their surfaces were analyzed. The results revealed that the surface rust was removed from the sample of type 1 No. 2 that was mainly composed of phosphate. The average weight reduction rates of re-corrosion samples were 0.58, 0.03, and 0.07% for type 1 No. 2, type 2 No. 2, and type 3 No. 2 respectively. The changes in the $Cl^-$ ion, a corrosive agent were found to be 28.60, -4.08, and -1.94 ppm for type 1 No. 2, type 2 No. 2, and type 3 No. 2 respectively. The water-treated films were analyzed by X-ray photoelectron spectroscopy (XPS). It was found that type 2 No. 2 had less Fe the basis metal, than that in type 3 No. 2 indicating much better film. Moreover, Si content was higher in type 2 No. 2, based on the silicate content, than in type 3 No. 2. They are speculated to be the reason or the formation of a better film. Type 1 No. 2, which is mainly composed of phosphate, would be inappropriate as a metal artifact conservation treatment. It was determined that type 2 No. 2 and type 3 No. 2 water treatments, which are mainly composed of silicate, provided excellent corrosion inhibiting effects. Corrosion inhibitors could be used as emergency treatment agents during the excavation of iron artifacts.