• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.59-66
• /
• 2007

In this paper, experimental investigation results of the effect of partial admission ratio on the performance of axial turbine was presented. A supersonic impulse turbine of gas generator cycle liquid rocket engine turbopump was used for the test. for experimental purpose, a nozzle block, in which total 14 number of axi-symmetric convergent-divergent nozzles are arranged circumferentially, was designed and manufactured. Partial admission ratio was controlled by changing the number of active nozzles. High pressure air was used as working medium for the test. The experimental result revealed that the performance of the supersonic impulse turbine does not much affected by the partial admission ratio for supersonic impulse turbine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.10-17
• /
• 2005

A performance prediction model is developed for partially admitted axial-type turbines. Losses generated within the turbine are classified to the windage loss, expansion loss and mixing loss. The developed loss model is compared with an experimental result. The results predicted with the developed model agree well with the experimental results than those predicted with several other models because this model considers three different kinds of losses. Moreover, this model predicts well the performance even the partial admission is changed. So, this model could be applied to predict the performance of partially admitted axial turbine and it has a high accurate performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1371-1379
• /
• 2012

This paper presents a method for estimating the contribution of vibration sources in gasoline direct injection engine parts with a multiple-input system. A partial coherence function was used to identify the cause of the linear dependence indicated by an ordinary coherence function. To apply the partial coherence function to vibration source identification in the powertrain system of a gasoline direct injection engine, a virtual model of a two-input and single-output system is simulated. For the validation of this model, the vibration of the powertrain parts was measured by using triaxial accelerometers attached to the selected vibration sources-a high-pressure pump, fuel rail, injector, and pressure sensor. After calculating the partial coherence between each source based on the virtual model, the vibration contribution of the powertrain system is calculated. This virtual model based on the partial coherence function is implemented to determine the quantitative vibration contribution of each powertrain part.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.6
• /
• pp.21-29
• /
• 2008

Performance characteristics on a partially admitted small axial-type turbine are experimentally studied with changing design parameters, such as exit flow angles at the nozzle and solidities at the rotor. The tested turbine consists of a single-stage and its mean radius is 35 mm. In this experiment, three different solidities and four different nozzle flow angles are applied to find the optimal design parameter. For a comparison of the turbine performance, the net specific output powers are evaluated. For a 3.4% partial admission rate, the best performance is obtained when the rotor solidity is at 2.18, which is increased to 74% compared to the solidity at full admission.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.898-906
• /
• 2008

A tested turbine consists of two stages, and an axial-type and a radial-type turbine are applied to the first and second stage, respectively. The mean diameter of the axial-type turbine rotor is 70 mm, and the outer diameter of the radial-type turbine is 68mm at the inlet. In this experiment, an axial-type turbine, two different radial-type turbines, and three different nozzle flow angles are applied to find the optimal design parameters. To compare the turbine performance, the net specific output torque is evaluated. The test results show that the nozzle flow angle on the first stage is a more important parameter than other design parameters for partially admitted small turbines to obtain high operating torque. For a 3.4% partial admission rate, the net specific output torque is increased by 13% with the addition of a radial-type rotor to the second stage when the turbine operates at $75^{\circ}$ nozzle flow angle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.889-898
• /
• 2009

A mixed-type turbine was adopted and the rotor outer diameter was 108 mm. Turbine rotors were designed to the axial-type blade because the turbine operated at a low partial admission rate of 1.7-2.0% with two stages. Performance characteristics were studied when the spouting from the nozzle was toward radially inward or outward direction. Additionally, the effect at each stage of the rotor was measured. For comparing with each turbine performance, properties were measured based on various rotational speeds. Measured net specific torque was used to compare with the turbine system performance. On the mixed-type turbine, better performance was obtained when the operating air spouted toward radially inward direction. The specific torque was increased by 7.8% from using the second stage although its effect depended on the rotational speed.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.71-73
• /
• 2016

기존 우산의 단점을 보완한 발명품, 공기우산이 개발되었다. 하지만 공기우산의 단점인 짧은 사용시간을 보완하기 위해 강우량에 따라 적절하게 공기 분사압을 변화시키는 것뿐만 아니라 공기우산의 사용인원의 조절을 위해 압력비와 분사구 형태에 따른 우산의 효과를 알아보는 것이 실 사용에 중요한 요소일 것이다. 이에따라 본 연구에서는 우산 앞 부분의 분출구 형상과 자유류와의 분사 압력비에 따른 자유류의 방어 능력을 확인해 보았다. 평면 분사구에서 압력비가 1.3, 1.5인 구간에서는 우산의 효과를 나타낼 수 없었고 압력비가 1.5인 구간부터 삼각형 분사구와 육각형 분사구에서 우산의 형태가 나타남을 알 수 있었다. 압력비가 2.0인 구간에서 육각형 분사구의 경우 통상적인 우산의 형상을 보이기 시작하는 것을 알 수 있다.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.96-103
• /
• 2007

A program for LAE (liquid Apogee Engine) firing strategy calculation was developed. This program can be used as the first stage of transfer orbit analysis, which process receives input parameters as like initial orbit elements, ground TT&C stations positions, satellite performances and makes firing user-selectable strategies. The developed program is dedicated to GEO satellites which using LAE generally and it can calculate six back-up strategies and deals situation its maximum firing number is six. The MS-EXCEL software was used for the input and output process. And the numerical calculation part was embodied with MATLAB functions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.6-6
• /
• 1998

항공기용 가스터빈 및 일반적인 산업용 분무시스템에서는 많은 양의 분사액체를 미립화 시키고 시스템의 연속적인 운전과 유지를 편리하게 하기 위하여 여러 개의 분사노즐을 열로 설치하여 동시에 분사하도록 하고 있다. 이렇게 동시에 분사할 경우, 노즐간에 거리가 충분히 크지 않으면 개별적으로 분사된 분무들이 서로 합해져서 하나의 연합된 분무군이 형성된다. 이렇게 Two element에 의해서 형성된 spray는 공급압력이 증가함에 따라 관성력이 증가하게 되어 중심부분에서 액막 혹은 액적상태로서 충돌이 발생하여 복잡한 분무특성을 가질 것이다. 따라서, 연합된 분무군의 특성을 이해하는 것은 응용의 측면에서 매우 중요하다고 할 수 있다.

• Journal of the Korean Society of Visualization
• /
• v.13 no.2
• /
• pp.33-37
• /
• 2015

매년 장마철에는 수막현상으로 인한 교통사고가 빈번하게 발생한다. 본 연구는 수막 형성 억제를 위해 타이어 앞부분에 설치되는 공기 분사 장치의 성능을 평가하는 것으로서, 공기 분사에 의한 수막 형성 억제를 모사할 수 있는 실험 장치를 제작하고, 수막 형성 억제 과정을 가시화하여 공기 분사 장치의 성능을 파악하고자 한다. 실험 변수로서 노즐의 형상 3가지와 수막에 대한 분사각 3가지에 대해 상세히 그 영향을 조사하였으며, 그 결과 분사각은 10도(지면에 대해서는 80도), 노즐 형상은 일자형일 때 수막 억제 효과가 가장 큰 것으로 파악되었다.