• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.549-556
• /
• 2002

주변이 Kinney의 정의에 따른 부분 고정도를 가지고 지지된 직4각형 평판이 부분 분포하중을 받고 있을 때의 안정해석을 유한 요소법으로 수행하였다. 수치해석에서 고려한 변수는 평판의 변장비 (=λ)와 부분 분포하중 작용폭 (=γ) 및 부분 고정도 (=f) 값이다. 여기서 특히 f=0.0 은 주변이 단순지지를 표시하고 f=1.0은 고정지지를 뜻하는데 수치해석에서는 f=0.0, 0.2, …, 1.0으로 변화시켰다. 유한 요소법으로 산정한 판의 좌굴계수 변화는 각각의 변장비에 대하여 나머지 두 개의 매개변수를 변랑으로 하는 대수 함수식으로 표시하였다. 제안한 대수식으로 추정한 임계하중치와 유한 요소법으로 산정한 임계하중치 간의 상관계수는 모든 변장비에 대하여 거의 단위치 (ρ=1.0)에 가까웁다. 따라서 제안한 대수 함수식은 구조 설계자들의 판 설계 및 안정 검토시에 유익한 자료로 이용될 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4642-4647
• /
• 2011

Solution for elastic foundation of plane strain state was derived by the application of variational method. Functions of the transverse distribution of the displacements for the analysis were chosen as linear functions. Loading conditions considered for the analysis were concentrated load and distributed load. Under the loading condition of the concentrated load, surface displacement was decreased drastically as the distance from the point of the loading increased. Under the loading condition of the distributed load, surface displacements were more uniformly distributed beneath the loading area when the ratio of the half of the loading width to the depth(B/H) of the compressible layer was greater. The surface displacement was more quickly converged from the edge of the loading area as the ratio(B/H) increased.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.31
• /
• pp.49-58
• /
• 1994

본 논문에서는 실제 작업 상황에 대한 신체역학적 해석을 할때에 기술적으로 어려운 부분중의 하나로 지목되는 외부하중 추정방법을 제시하고 그에 대한 결과로, 실제상황에 있어서의 외부하중과 외부모멘트의 분포를 구하였다. 개발된 외부하중 추정방법은 Psychophysics의 RPE(Ratings of Perceived Exertion)의 개념에 근거하였으며, 외부하중은 RPE와 그밖의 작업 혹은 개인적 특성을 나타내는 변수들에 의한 회귀분석으로 추정되었다. 구해진 실제 상황에서의 외부하중분포로부터 다양한 수작업의 특성과 그리고 그에 따르는 각 손관절의 역할을 해석하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.674-678
• /
• 2010

하천 형상은 자연적인 흐름과 인간의 활동에 의해 다양한 형태로 변화되며, 이러한 변화과정을 통해 안정된 형상을 갖추어간다. 이러한 변화는 흐름과 상호작용 과정을 통해 진전되며, 하천의 형태를 변화시키는 흐름 또한 저수로 형태 및 수량적인 변화 등에 의해 다양한 특성을 갖게 된다. 본 연구에서는 하천 내의 형태가 인간의 활동에 의해 인공적으로 변화되었을 경우 하천의 수리학적 특성에 미치는 영향을 3차원 수치해석 모형인 EFDC(Environmental fluid Dynamics Code, 미국 버지니아 해양연구소 개발) 모형을 이용하여 검토하였다. EFDC 모형은 크게 유동, 퇴적물 이송, 수질의 세 부분으로 구성되어 있으며, 유동 모델은 수온과 염분이 고려된 3차원 천수방정식을 기본으로 하고 있다. EFDC 모형의 적용을 위한 Case1은 일반적인 저수로 형태 갖는 하천이며, Case2에서는 하천 저수로 내 인공적으로 하중도가 설치되었을 경우에 대하여 수리학적 특성을 모의하였다. 수치모의 결과 다음과 같은 결과를 확인 할 수 있었다. 수위변화는 하중도 유무에 따라 상하류 부분에서 전혀 다른 결과를 나타냈다. 유속분포는 Case1에 비하여 Case2의 경우 하중도 설치에 의해 하천의 상류부에서는 흐름의 정체부분이 나타났으며, 하류부에서는 급확대에 의한 유속의 감소가 나타났다. 그리고 하중도에 의해 저수로가 분기됨에 따라 저수로의 급축소부가 발생되고, 이로 인해 유속이 급속히 증가되었다. 본 연구의 Case2와 같이 하천에 하중도를 설치할 경우 만곡부 외측 부분에서는 유속의 현저한 증가가 발생하는 것을 확인할 수 있었다. 이와 같이 하중도의 설치 위치, 하중도의 규모 등에 따라 하중도 부분의 급격한 수위 및 유속 변화이 발생되는 것을 확인하였으며, 만곡부에 이와 같은 것을 설치할 경우 보다 정밀한 수리계산을 통해 안전성이 확보되는 하중도 설치가 필요할 것으로 판단된다.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.13-24
• /
• 2006

The stresses in concrete pavement systems are larger when vehicle loads are applied at pavement edges, and these large stresses significantly affect the behavior and performance of pavements. Therefore, in this study, the stress distribution and the critical stresses in concrete pavements were investigated using a finite element model when dual-wheel single-, tandem-, and tridem-axle loads were applied at pavement edges. First, the stress distribution along the longitudinal and transverse directions was analyzed, and then the effects of slab thickness, concrete elastic modulus, and foundation stiffness on the stress distribution were investigated. The effect of the tire contact pressure related to the tire print area was also studied. The location of the critical stress occurrence in concrete pavements was finally investigated. From this study, it was found that the critical concrete stress due to edge loads became larger as the concrete elastic modulus increased, the slab thickness increased, and the foundation stiffness decreased. The effect of the tire contact pressure on the critical stress was clear as the slab thickness became smaller. The critical stress location in the transverse direction was independent of the concrete elastic modulus and the foundation stiffness; however, it moved into the interior as the slab thickness increased. The critical stress location in the longitudinal direction was under the axle for single- and tandem-axle loads, but for tridem-axle loads, it tended to move under the middle axle from the outer axles as the concrete elastic modulus and/or slab thickness increased and the foundation stiffness decreased.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.4
• /
• pp.89-96
• /
• 2001

In this study non-linear finite element analysis of dynamic response of steel arch under partially distributed dynamic load was discussed. Material and geometric non-linearities were included in finite element formulation and steel behavior was modeled with Von Mises yield criteria. Either radial or vertical dynamic load was dealt in numerical examples. Normal arch and arch with maximum shape imperfection of L/11,000 were studied. The analysis results showed that maximum displacement at the center of arch was occurred when 70% of arch span was loaded. The maximum displacement at a quarter of arch span was occurred when 50% of arch span was loaded and the displacement was larger than that of center of arch. Ratio of arch rise to arch span within 0.2∼-.3 seems to be appropriate for arch under radial or vertical load.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.110-112
• /
• 2003

본 논문에서는 상용 CAD시스템을 이용하여 공구 및 인서트를 모델링하고, 절삭이론 및 유한요소법을 사용하여 인서트의 온도분포를 계산하였다. 절삭이론을 이용하여 절삭실험 없이 인서트 끝단의 온도를 계산하고, 이를 하중 조건으로 사용하여 공구의 온도분포를 얻을 수 있었다. 또한 공구 홀더 끝 부분의 여러 가지 온도 경계조건에 대하여, 공구 및 인서트의 온도분포가 계산되었다. 다양한 경계조건에 따른 인서트의 온도분포에 대한 지식은 공구설계 및 가공조건 설정시 유용하게 이용될 수 있으며 특히 어떠한 절삭실험 얼이 계산이 가능하므로 가공공정설계시 효과적으로 이용될 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.641-652
• /
• 2007

In this paper, a half-scaled substructure test was performed to evaluate the buckling and structural safety of an existing transmission tower subjected to wind load. A loading scheme was devised to reproduce the dead and wind loads of a prototype transmission tower, which uses a triangular jig that is mounted on the reduced model to which the similarity law of a half length was applied. As a result of the preliminary numerical analysis carried out to evaluate the stability of a specimen for the design load, is was confirmed that the calculated axial forces of tower leg members were distributed to $80{\sim}90%$ of an admissible buckling load. When the substructured transmission tower was loaded by 270% of its maximum admissible buckling load, it was failed due to the local buckling that is occurred in joints with weak constraints for out-of-plane behavior of leg members. By inspection of load-displacement curves, displacements and strains of members, it is considered that this local buckling was due to additional eccentric force by unbalanced deformation because the time that is reached to yielding stress due to the bending moment is different at each point of a same section.

• Journal of the Korea Convergence Society
• /
• v.5 no.2
• /
• pp.7-11
• /
• 2014

The artificial joint is consisted with the upper structure of tungsten alloy steel and the lower part of polyethelene are applied with load. When this joint is applied with load in this study, the load distribution at the joint and the stress distribution of support hole to install the joint are investigated by finite element analysis. These results can be utilized at obtaining the basic material to have the experiment for the real thing. The crack is initiated as the load is concentrated at the end of corner on the upper structure. This behavior is in accord with a case of tissue damage due to the breakage of artificial joint reported at medical science.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3423-3428
• /
• 2014

Numerical studies were performed to evaluate the structural safety of a greenhouse under both snow and wind loads. In the case of a wind load, fluid-structure interaction (FSI) method was used to consider the local pressure distributions on the greenhouse-induced by aerodynamic characteristics. The results showed that the maximum stress and deformation occur near the junction of pipe supports and rafters of the roof, where connecting clips are installed. Moreover, the wind load is a more severe condition than a snow load. Overall, these results will be used to design a prefabricated connecting clip with easy installation and low maintenance.