• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1833-1840
• /
• 1993

An efficient vibration analysis method, Component Mode Synthesis(CMS), for an exhaust system with bellows is presented. Analyses are performed for two types of bellows, where characteristics of vibration modes affecting idle shake and interior noise of a vehicle are examined. Also analyzed are the contributions of an exhaust and engine mounting system to the idle shake and interios noise. Comparison between the analysis and test is in good agreement, hence the CMS method is shown to be efficient and valid.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1195-1201
• /
• 2002

Researches on the FRF-based substructuring method have been mainly focused on vibratory response analysis. Present study Is concerned about the application of the method to the dynamic stress analysis of a air-conditioner compressor mounting bracket in a passenger car. This is performed by using reaction forces that can be obtained by the FRF-based substructuring method. The air-conditioner system, composed of a compressor and bracket, Is analyzed by using the FRF-based substructuring method. The experimental and numerical FRFs are combined to calculate the system responses and reaction forces at the connection point. The dynamic reaction forces plugged into the bracket FE model to compute the stresses of the bracket Dynamic strains by the present method are compared with those from strain-gage test for bracket system on shaker. The comparison shows possibility of practical usage of the method for the real problem

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.161-166
• /
• 2001

This study intends to reduce the weight of structure without changing the dynamic characteristics. At first, the Vibration analyses by the Substructure Synthesis Method and FEM using the ANSYS are performed for the engine speed converter to confirm the reliability of the analyzing tools. Weight minimization is performed by the Sensitivity Analysis and the Optimum Structural Modification. To decrease the converter weight ideally, the parts with low sensitivity are to be cut mainly, and the changing quantity of the natural frequency by the cut is to be recovered by the weight modification of the parts with high sensitivity. As the unique mathematical solution for the homogeneous problem( i.e. 0 object function problem) does not exist, the converter is redesigned with much thinner initial thickness. The goal of this study is to recover the dynamic characteristics of redesigned structure to those of the original one. To say in the other words, the modified structure has the same dynamic characteristics and the more lighter weight to compare with the original one. In this analysis, the modification was performed with the redesigned initial thickness of 60 mm and 70 mm. And the numbers of the interesting natural frequencies are 1, 2, 4 respectively. Consequently 27％ of weight reduction effects were earned.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.569-569
• /
• 2012

탄소나노튜브(carbon nanotubes)의 우수한 전기적, 물리적 특성으로 인해 트랜지스터, 태양전지, 고감도 센서, 나노 섬유, 고분자-탄소나노튜브 고기능 복합체 등 다양한 분야에서 이를 응용하려는 노력이 활발히 진행되고 있다. 흥미롭게도 탄소나노튜브는 구조적인 특성 (직경, 밀도, 벽의 수)에 따라 각기 다른 비표면적, 열 전도성, 전기 전도성, 접촉각, 전계방출 특성을 지닌다고 보고되고 있다. 따라서 다양한 분야의 응용을 위해서는 구조적인 특성 제어가 핵심적인 요소라고 할 수 있다. 본 연구에서는 열화학기상증착법(thermal chemical vapor deposition)을 이용하여 수직 정렬된 탄소나노튜브를 합성 하였다. 합성과정에서 압력의 변화가 탄소나노튜브의 밀도와 길이에 큰 영향을 미친다는 것을 확인하였고, 이러한 현상을 이해하기 위해 두 가지의 가능성을 고려하였다. 첫째는 압력의 변화에 따른 촉매의 형성 변화 가능성이며, 둘째는 탄화수소가스의 유입양의 변화에 따른 영향이다. 분석 결과, 동일한 압력에서 탄화수소가스의 부분압을 변화시켜 실험한 결과로부터 탄화수소의 유입양의 변화가 합성된 탄소나노튜브의 밀도에 큰 영향을 미치고 밀도가 높은 경우 길이가 긴 탄소나노튜브가 합성되는 것을 확인할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.45-54
• /
• 2011

This paper discuss about structure modification method of the reciprocating compressor to reduce its vibration and noise in small refrigeration system. The structure modification is applied using analytic FE models and then applying suggested Component Mode Synthesis(CMS) algorithms. The efficient CMS algorithms to a compressor's fixed base design problem are analytically tried and verified from some experiments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2201-2210
• /
• 2000

Vibration of a rotating disk-spindle system is analyzed by using Hamilton's principle, FEM and substructure synthesis. A rotating disk undergoes the rigid body motion and the elastic deformation. It s equation of motion is derived by Kirchhoff plate theory and von Karman nonlinear strain. A rotating shaft is described by Rayleigh beam theory considering the axial rigid body motion. The stationay shaft supporting the rotating disk-spindle-bearing system is modeled by Euler beam theory, and the stiffness of ball bearing is determined by A.B.Jones' theory. FEM is used to solve the derived governing equations, and substructure synthesis is introduced to assemble each structure of the rotating disk-spindle system. The developed theory is applied to the spindle system of a 35' computer hard disk drive with 3 disks to verify the simulation results. The simulation results agree very well with the experimental ones. The proposed theory may be effectively expanded to the complex structure of a disk-spindle system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.42-49
• /
• 1995

In this study, the optimum structural modification of the L-type structure by shape changes is suggested. The vibration characteristics of L-type structure are analyzed by the sub-structure synthesis method, and the coordinte sensitivities of each sub-structure are calculated and the change quantities of the positions to be modified are suggested by using the coordinate sensitivities. The results obtained are as follows : 1. The sensitivities of the natural frequency could be calculated by the sensitivity analysis. 2. The change quantities of the position to be modified could be suggested by the optimum structural modification method. 3. The developed program could reduce the process and time of computation, since the sensitivity was directly calculated by differential method, not finite difference method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.716-725
• /
• 2005

The method of substructure synthesis o. component mode synthesis(CMS) provides an effective means of dynamic analysis of very large and/or complex structures. In this study, residual dynamic flexibility attachment modes in hybrid component mode synthesis are considered for the purpose of exactly compensating the effect of higher order truncated modes. Following this way, the analysis accuracy of the synthesized structure can be improved effectively with less computational effort. In order to show the accuracy and effectiveness of the proposed hybrid component mode synthesis(HCMS), numerical experiments were carried out for the models of a clamped-clamped beam. The results verified the effectiveness of the proposed method.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.82-89
• /
• 1996

In this study, to choose the drilling m/c with analysis model for dynamic design of machine tool strctures, are used substucture syntheis method for reduction to degrees of freedom of dynamic model and analysis evaluation of substructures The dynamic factors of substurctures are examined by substructure synthesis method. And that dynamic design of structures for energy balancing are performed. The computer program for calculated of the dynamic and energy distribution analysis was developed. Result of numerical analysis by developed program obtained to conclusion as following. The design of machine tool structures by dynamic avoid the resonances, and are known to considered based on the energy balancing. These methods can be used effectively for the performance evaluation, design modification and improvement of dynamic performance evaluation, design modification and improvement of dynamic performance of machine tools.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.4
• /
• pp.5-12
• /
• 2001

This paper presents the simulation methodology of the interior noise of vehicle using the frequency response function based hybrid modeling of the system which consists of multi-subsystem models obtained by the test or analysis. The complex systems such as a trimmed body of high modal density and a powertrain were modeled by using experimental data, and a sub-frame of a vehicle of low modal density was modeled by finite element data. Modeling of the whole system was executed and validated in the two stages. The first stave is combining the trimmed body and the sub-frame, and the second stage is attaching the powertrain, which is a exciting source, to the combined model of the first stage. The input force to the system was modeled as an equivalent force in the virtual space, which was obtained from impedance method using the FRFs of the powertrain and the responses. The interior noise predicted by the proposed method was very close to the direct measurement, which showed feasibility of the proposed modeling procedure. Since the methodology is easily applied to both the transfer path analysis of structure-borne noise and the analysis of noise contribution of a sub-system, it is expected to be a strong tool for design change of a vehicle in the earlier stare.