• Title/Summary/Keyword: 부가관성모멘트

Search Result 4, Processing Time 0.024 seconds

A Study on the Engine Mounting System of the 4WD Vehicle by Experimental Modal Analysis (실험적 Mode 해석을 통한 4WD 자동차의 엔진마운트에 관한 연구)

  • 사종성;김광식
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1991.04a
    • /
    • pp.139-144
    • /
    • 1991
  • 4WD자동차의 엔진마운트 설계기법의 정리 및 실제차량의 실험적 mode 해 석을 통해 다음과 같은 결론을 얻었다. 1. 4WD자동차의 엔진마운트 설계 개념을 체계화시키고, 이를 실제차량에 대 해서 실험적 mode해석을 해본 결과 잘 일치함을 확인하였다. 2. power transmission system에 부가되는 장치(front propeller shaft)의 영 향을 검토한바, frequency shift현상이 발생함을 확인하였다. 이러한 영향은 이들 부가장치들의 질량증가 및 관성모멘트의 변화로 기인되며, 질량의 증가 보다는 관성모멘트의 영향이 상대적으로 크리라 판단된다.

  • PDF

기술현황분석 - 전기적 관성모멘트를 이용한 제동장치 성능시험기 소개

  • Jeong, Dong-Su
    • 기계와재료
    • /
    • v.25 no.3
    • /
    • pp.130-136
    • /
    • 2013
  • 철도차량용 제동장치 성능시험기는 제륜자의 마찰계수, 마모량, 열반점 등의 물리적 성질을 실차와 유사한 환경조건에서 시험을 수행함으로써 제륜자의 연구개발 및 성능평가의 목적으로 활용한다. 제륜자는 차량의 운동에너지를 열에너지로 변환한다. 성능시험기는 철도차량의 주행 운동에너지에 해당하는 관성질량으로부터 회전 운동에너지에 해당하는 관성모멘트를 조성하여야 한다. 공용 시험기에서 각종 철도차량에 대한 관성모멘트를 기계적 관성모멘트인 플라이휠로 모의하기에는 용량도 크고 구조가 복합하여 현실적으로 한계가 있다. 본 연구에서는 기계적 관성모멘트의 한계를 극복하고자 전기적 관성모멘트를 부가적으로 활용하는 기법을 제시하고 이를 적용한 시험기를 소개하고자 한다. 이러한 연구는 시험기의 외형적인 크기를 줄이고 또한 각종 철도차량에서 요구하는 정량적인 관성질량의 모의가 가능하리라고 사료된다.

  • PDF

A Sliding Mode Control of Robot Manipulator Operated Under the Sea (해저작업 로봇 매니퓰레이터의 슬라이딩 모드 제어)

  • Park, H.S.;Park, H.I.
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.13 no.12
    • /
    • pp.106-113
    • /
    • 1996
  • This paper presents a modeling of undersea robot manipulators and a control scheme appropriate for manipulating the manipulators working under the unstrcuctured sea water environment. Under the sea, the added mass and added moment of inertia, buoyancy, and drag forces should be considered in modeling the dynamics of the robot manipulators. Due to the complexity of them, the desired dynamics of manipulators can not be accomplished by the conventional control schemes. Hence, a sliding mode control is applied to control the modeling error.

  • PDF

9-DOF Modeling and Turning Flight Simulation Evaluation for Parachute (9-DOF 낙하산 모델링 및 선회비행 시뮬레이션 검증)

  • Lee, Sang-Jong;Min, Byoung-Mun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.9
    • /
    • pp.688-693
    • /
    • 2016
  • This paper describes the parachute dynamics modeling and simulation results for the development of training simulator of a HALO (High Altitude Low Opening) parachute, which is currently in use for military purposes. The target parachute is a rectangular shaped parafoil and its dynamic model is derived based on the real geometry data as the 9-DOF nonlinear equations of dynamics. The simulation was conducted through the moment of inertia and its aerodynamic derivatives to reflect the real characteristics based on the MATLAB/Simulink. In particular, its modeling includes the typical characteristics of the added mass and moment of inertia, which is shown in the strong effects in Lighter-Than-Air(LTA) flight vehicle. The proposed dynamic modeling was evaluated through the simulation under the spiral turning flight conditions of the asymmetric control inputs and compared with the performance index in the target parachute manual.