• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.3
• /
• pp.157-164
• /
• 2016

The performance of convective heat transfer in rod bundle flow was experimentally evaluated using a twist-vane spacer grid. A $4{\times}4$ square-arrayed rod bundle was prepared as the test section, with a pitch-to-diameter ratio(P/D) of ~1.35. To check the convective heat transfer performance, the circumferential and longitudinal variations in rod-wall temperatures were measured downstream of the twist-vane spacer grid. In the circumferential measurements, the rod-wall temperature toward the twist-vane tip showed the lowest value, which might be due to the deflected water flow caused by the twist-vane. On the other hand, the wall temperature of the longitudinal measurements near the twist-vane spacer grid decreased dramatically, which implies that the convective heat transfer performance was enhanced. A heat transfer enhancement of ~35 % was achieved near downstream of the twist-vane spacer grid, as compared with the upstream value. Based on the present experimental data, a correlation for predicting the heat transfer performance of a twist-vane spacer grid was proposed.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.162-174
• /
• 1996

The local hydraulic characteristics in a single phase flow of a 6$\times$6 rod bundle with neighboring different spacer grids were measured by using a LDV(Laser Doppler Velocimeter) system. 6$\times$6 rod bundle is formed by two 3$\times$6 rod bundles with different spacer grids. The objective of this study in a rod bundle is to investigate the thermal-hydraulic interactions between different spacer grids with different configurations and resistance. By using a LDV system, the velocity and turbulent intensity in axial and horizontal directions ore measured. Pressure drop measurements ore also performed to evaluate the loss coefficient for the spacer grid and the friction factor for rod bundles. Implications concerning thermal mining due to spacer grids were investigated based on the hydraulic test results. Swirl factor, which is assumed as a qualitative criteria for DNB(departure from nucleate boiling), was defined and estimated from the horizontal velocity result.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.435-440
• /
• 1996

PHEBUS FPT0 노내실험의 핵연료 다발에 대한 실험후 비파괴 검사 및 파괴 검사 결과를 분석하여 노심손상 후기과정을 정alf 분석하였다. 분석한 비파괴 검사결과는 gamma scanning, radiography, tomographies 였으며 파괴 검사 결과는 정밀사진, metallography, Electron Probe Micro Analysis(EPMA)였다. 그 결과, PHEBUS-FPT0 실험에 사용한 핵연료다발은 기존에 수행된 어떤 다른 노내실험의 핵연료다발보다 많이 용융되었으며 용융 pool 및 피막충의 형성, 용융물 내부의 자연대류 열전달과 이에 따른 shroud 물질 손상, 핵연료다발 물질들간의 eutectic 형성 등을 보여주었다. 특히 Ag-In-Cd 제어봉 물질과 stainless-steel이 핵연료봉 물질과 반응하여 이들의 용융온도를 낮게하여 실험 예측값보다 많이 핵연료다발이 손상되어 기존 중대사고 해석 전산코드의 개선이 요구되었다.

• Nuclear Engineering and Technology
• /
• v.23 no.4
• /
• pp.401-409
• /
• 1991

This work is concerned with the development of an analytical model to predict the friction in longitudinally finned rod bundles. Such bundles are currently considered in KMRR design. The present model assumes the validity of the Law of the Wall over entire flow area. The flow channel area is divided into the interfin region and a number of element channels, and the algebraic form of the Law of the Wall is integrated over each element channel and interfin region to yield an analytic expression for the pressure drop. The model reasonably predicts the 6 fin KMRR data, and overpredicts the 8 fin data about 15 percent.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2111-2118
• /
• 1992

In this study, an analytic model is developed to predict Nusselt numbers for turbulent flow in a rod bundle. Flow channel area is divided into several element channels, and simple algebraic equations of universal velocity and temperature profiles are integrated over each element channel. The integral equations are then added to yield an analytic expression for the nusselt number of a rod bundle. The analytic model reasonably predicts the available heat transfer data.

• Journal of Energy Engineering
• /
• v.10 no.2
• /
• pp.161-165
• /
• 2001

봉다발 내 온도장 해석을 위해 개발되어진 난류 Prand시 수 모델들을 중심으로 액체금속에 대한 비교연구를 수행하였다. VANTACY-II 코드에 사용된 Zeggel & Monir의 모델의 기초가 된 Jischa & Rieke 모델 및 상수형 모델(Pr$_{t}$=0.9)을 비교대상 모델로 선정하여 난류 Prandtl 수의 비등방성과 공간분포 및 분자 Prandtl 수의 영향을 고려한 본 연구모델과 P/D와 Peclet 수를 변화시키며 얻어진 Nusselt 수의 결과를 비교하였다. 비교결과 본 모델이 다른 모델에 비하여 봉다발 내 액체금속의 열전달 거동을 전반적으로 잘 예측하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.520-525
• /
• 1998

난류혼합율에 대한 예측은 원자로의 노심 열수력 설계에 있어 매우 중요한 일이다. 봉다발 구조에서 난류혼합의 주요 원인으로 지목되고 있는 유동액동(flow pulsation) 현상에 대한 척도평가(scale analysis)틀 통해 봉다발 유동장을 흐르는 저 Prandtl 수 유채에 대판 난류혼합율 평가식을 유도하였다. 난류혼합에 기여하는 인자가 분자운동, 등방성 난류운동(유동맥동 효과률 배제한 난류운동), 그리고 유동맥동의 세 부분으로 구성되어 있다고 가정하고, 각각에 대한 길이 및 속도척도를 평가하여 난류혼합율을 유도하였다. 평가식에는 P/D, Re수 P${\gamma}$ 수 등의 인자가 고려되어 있어 다양한 기하학적, 수력학적 조건과 유체의 물리적 특성이 반영되어 있다. 유도원 난류혼합율 평가식을 실험 상관식과 비교하였으며, 비교 결과 만족스러운 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.263-273
• /
• 1992

The study on the velocity distribution and the pressure drop characteristic of the nuclear fuel assembly is of importance for the thermal hydraulic design and safety analysis. The purpose of this experimental study is to investigate the hydraulic mixing behind the different kinds of spacer grids in the now or rod bundles. In this study, the detailed hydraulic characteristics in subchannels of 5$\times$5 PWR(Pressurized Water Reactor) rod bundles were measured using one-component He-Ne LDV(Laser Doppler Velocimeter). Measurements of the axial velocity, turbulent intensities and pressure drops were peformed Lateral velocity, turbulent intensities and Reynolds shear stress were also measured by adjust-ing LDV alignment. Friction factors in rod bundles and loss coefficients for spacer grids were evaluated from the measured pressure drops. Hydraulic mixing performance for different kinds of spacer grids could be investigated by estimating the turbulent cross-flow mixing rates between neighboring subchannels.

• Nuclear Engineering and Technology
• /
• v.28 no.1
• /
• pp.56-71
• /
• 1996

The local hydrulic characteristics in subchannels of 5$\times$5 nuclear fuel bundles with spacer grids were measured at upstream and downstream of the spacer grid for the investigation of the spacer grid effects on turbulent flow structure by using an LDV(Laser Doppler Velocimeter). The measured parameters are axial velocity and turbulent intensity, skewness factor, and flatness factor. Pressure drops were also measured to evaluate the loss coefficient for the spacer grid and the friction factor for rod bundles. From these data, it was found that the turbulent mixing and forced mixing occur up to $x/D^h=10$ and 20 from the spacer grid, respectively. The turbulence decay behind spacer grid behaves in the similar decay rate as turbulent flow through mesh grids or screens. Mixing factors useful in subchannel analysis code were correlated from the data and show the highest value near spacer grid and then have a stable values.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.7-14
• /
• 1986

To predict the fuel clad temperature during the reflooding phase of a LOCA, one may need a knowledge of reflood heat tranfer mechanism in a rod bundle. For this purpose reflooding experiments have been carried out with an electrically heated 3*3 rod bundle. Using the method for the determination of local heat transfer coefficient from the measured wall temperature the parametric effects of coolant flow rate, initial wall temperature, coolant subcooling and heat generation rate on the propagation of rewetting front were investigated. Prediction of the wall temperature histories for these experiments was discussed using REFLUX code with modification of the rewetting temperature correlation. Through this modification, better agreement between experiment and prediction was obtained.