• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.15-23
• /
• 2000

RC oscillation method was applied to study the condenser characteristics of two metal sticks insulated by vinyl tube and used in the dielectric constant determinations of most soils. Its capacitance as influenced by the contacted ambient materials was measured as relative capacitance of the sensor sticks compared with the standard one on the RC oscillation circuit. According to the equivalent circuit of the sensor stick set, the measured capacitance was composed of a basic capacitance connected in parallel with sensor stick capacitance, which was composed of lineally connected vinyl tube capacitances and the sensing part capacitance. The dielectric constant (U) of the contacted ambient moist soil located in the sensing part around the sticks interrelated with the other parameters as following equation. $$\frac{1}{C-B}=\frac{k}{U}+Z$$ where C is the output total relative capacitance, B is the hidden and fixed basic relative capacitance, k is a constant related with U, and Z is a constant for the insulating vinyl tube capacitances determined by its thickness and dielectric constant. The constant k is determined by the spacing and length of sensor sticks. The Z value is theoretically an invariable constant, but it may become considerably bigger than the determined in lab if air tube is formed on the surface of sensor sticks by some shocks on them after their installation in soil. Due to the unstability of lab Z value, it may be better to revise it after sensor stick's installation in soil and no shaking shocks should be applied on them.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2138.1_2139.1
• /
• 2009

COS 조작봉은 선로의 사고나 설비교체 또는 수리 등이 필요할 때 활선상태에서 COS를 개폐하기 위한 장비로서 보통 절연특성 및 강도가 우수하고 경량소재인 FRP(Fiberglass Reinforced Plastics)로 제작된다. 따라서 특고압 선로에서 작업 중 안전사고를 예방하기 위해 사용되는 장비인 만큼 안전거리 확보와 작업의 편리성을 고려하여 직접 조작봉을 연장하여 사용할 수 있도록 다단으로 제작되며, 조작봉의 크기는 작업조건에 따라 길이를 선택하여 사용할 수 있도록 2, 4, 6m급 등 길이에 따른 종류별로 생산되고 있다. 이러한 COS 조작봉의 사용특징은 장소와 시간에 관계없이 사용이 가능해야 하고, 특정한 사정에 의해선 작업자 혼자서 사용할 수 있도록 조작봉과 일체된 조명장치의 필요성이 항상 제기되어 왔던 문제이다. 본 논문에서는 이러한 문제점에 주안을 두고 조작봉과 일체된 전계검출에 의한 발광동작을 제어할 수 있는 발광형 COS 조작봉에 대해 각각의 구성별 요소들을 분석하고자 한다.

• Korean Journal of Environment and Ecology
• /
• v.12 no.2
• /
• pp.138-146
• /
• 1998

Ten plots were established to study the vegetation structure of the Songinbong virgin forest in Ullungdo. It was classified into three communities Fagus crenata var. multinervis commnunity, Acer okamotoanum-Fagus crenata var. multinervis community, and Acer okamotoanum community. Shannon's diversity indicies of this area were not high(0.5150~0.8437), due to the geographical and vegetational characteristics. Considering the community structure(importance value, distribution of DBH class, and so on), the vegetation of the Songinbong virgin forest are thought to be stable continuously. With the analysis of plant growth type, it was presumed that Acer okamotoanum have increased after artificial disturbances in this area where Fagus crenata var. multinervis had been dominanat.

• Journal of KSNVE
• /
• v.7 no.5
• /
• pp.837-845
• /
• 1997

The dynamic interactions between the reactor vessel and the control element drive mechanisms (CEDMs) of a pressurized water reactor are studied with the simplified mathematical model. The CEDMs are modeled as multiple substructures having different masses and the reactor vessel as a single degree of freedom system. The explicit equation for the frequency responses of the multiple substructure system are presented for the case of harmonic base excitations. The optimum dynamic characteristics of the CEDMs are presented to reduce the dynamic responses of the reactor vessel. The mathematical model and its response equations are verified by finite element analysis for the detailed model of the reactor vessel and the CEDMs for the harmonic base excitations. It is finally shown that the optimal dynamic characteristics of the CEDM presented can be applicable for the aseismic design.

• Nuclear Engineering and Technology
• /
• v.23 no.4
• /
• pp.401-409
• /
• 1991

This work is concerned with the development of an analytical model to predict the friction in longitudinally finned rod bundles. Such bundles are currently considered in KMRR design. The present model assumes the validity of the Law of the Wall over entire flow area. The flow channel area is divided into the interfin region and a number of element channels, and the algebraic form of the Law of the Wall is integrated over each element channel and interfin region to yield an analytic expression for the pressure drop. The model reasonably predicts the 6 fin KMRR data, and overpredicts the 8 fin data about 15 percent.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.2
• /
• pp.80-84
• /
• 2014

Inclusion body fibromatosis is a rare benign soft tissue neoplasm typically involving fingers and toes of children in mostly less than one year old. Histologic findings include spindle-shaped fibroblasts surrounded by dense stroma and small perinuclear eosinophilic inclusions in the cytoplasm. Although the tumor typically undergoes spontaneous regression, surgery is considered when functional impairment or deformity develops with the lesion. Unfortunately, recurrence rate was reported to be as high as 60 % following tumor excision. Authors would like to present our case where the tumor occurred in relatively older child and kissing lesion was found a few months after the surgery.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.2
• /
• pp.108-131
• /
• 2008

The Miocene andesite and basalt intruded into and/or extruded on the Cretaceous volcanic and granitic rocks over the area of Chenjabong and Sirubong in the vicinity of Jinhae, southern part of Kyongsang basin. The K-Ar ages of the younger volcanic rocks are from 16 Ma (Sirubong andesite) to 10 Ma (Cheonjabong basalt), which indicate the Miocene volcanism in the outer part of the Tertiary basin in the Korean peninsula. The volcanics are divided into Chenjabong andesite, Cheonjabong basaltic andesite, Sirubong andesite and Cheonjabong basalt. The Cheonjabong andesite is composed of phenocrysts of clinopyroxene and plagioclase ($An_{60{\sim}64}$) and groundmass with lath-like plagioclase ($An_{76{\sim}84}$) and glass. The Cheonjabong basaltic andesite is composed of plagioclase phenocryst ($An_{60{\sim}64}$) with plagioclase lath ($An_{65}$) and glass in groundmass. The Sirubong andesite is only consisted of plagiocalse lath ($An_{64{\sim}68}$) and glass with absence of phonocryst. The Cheonjabong basalt shows typical porphyritic texture with phenocrysts of olivine ($Fo_{69-84}$) and clinopyroxene. The groundmass of the Cheonjabong basalt is composed of microphenocrysts of olivine, clinopyroxene and plagioclase ($An_{66{\sim}71}$) and plagioclase laths ($An_{57{\sim}65}$) showing pillotaxitic and intergranular texture. The Cheonjabong andesite, Cheonjabong basaltic andesite, Sirubong andesite are belong to calc-alkialine but the Cheonjabong basalt is alkaline basalt. By tectonic discrimination diagrams the parental magmas of the volcanic rocks have occurred boundary.

• (The)Study of the Eastern Classic
• /
• no.73
• /
• pp.119-151
• /
• 2018

This paper is a study of the historical significance of The water and land ceremony performed by Bongeunsa temple in the Joseon Dynasty. The Bongeunsa temple was originally a hermitage named Geungseongam, which was located in the Hakdang-dong, Gwangju County, Gyeonggi Province. After that, Geungseongam was named as Geungseongsa temple. Geungseongsa temple was left in that position and acted as the Temples belonging to Royal Tombs(陵寢寺, TRT) of the King Sungjong, later the name of the temple was changed to Bongeunsa Temple. As a result of movement of the royal tomb of the Joongjong(靖陵) next to the royal tomb of Sungjong, the Bongeunsa was also used as a TRT of the Seonjeongneung royal tomb. After that, the grandson of the King Joongjong, crown prince Soonhoe early passed away, Buddhist shrine (願堂) was set in Bongeunsa temple. Bongeunsa temple remained as a royal prayer place, serving as a Buddhist shrine for crown prince Soonhoe and serving as a Jopo temples for Seonjeongneung royal tomb until the end of the Joseon Dynasty. From the time when it was called Geungseongam to the time after when it was renamed as Bongeunsa Temple, this temple performed The water and land ceremony. But the characters changed little by little. From the King Sejo to King Sungjong, The water and land ceremony characterized Consolation ceremony for the spirit of the dead for prince Gwangpyeong, King Sejong, Queen Soehan and served as the Buddhist memorial praying for the well being of the royal family and people. From the time of the King Yonsan to the time of King Myeongjong, The water and land ceremony had strong characters for Consolation ceremony for the spirit of the dead for King. In the late Joseon Dynasty, Bongeunsa Temple served as the royal party of The water and land ceremony. On the other hand, after the Manchu war of 1636, Bongeunsa Temple also served as the national water and land ceremony for the victims who were killed in the mountains of Namhan. In the Joseon dynasty, The water and land ceremony performed by Bongeunsa Temple was strongly directed for Consolation ceremony for the spirit of the dead for royal family members, and Bongeunsa Temple was maintained as a royal prayer throughout the Joseon Dynasty.

• 방재와보험
• /
• s.99
• /
• pp.6-7
• /
• 2003

한국화재보험협회는 9월 18일 오전 10시 세종문화회관 컨벤션센터에서 본 협회 방정훈 이사장과 김두관 행정자치부장관을 비롯하여 손해보허 관계자와 화재.소방안전 관련 단체 등이 참석한 가운데, 화재예방 및 진압, 구조구급 활동을 통하여 국민의 생명과 재산 보호에 헌신한 전국의 우수 소방관을 표창하는 "제30회 소방안전봉사상 시상식"을 개최하였다. 이번 시상식에서 선발된 대상 및 본상 수상자 17명에게는 상패 및 부상(대상 300만원, 본상200만원)과 함께 1계급 특진의 영예가, 특별상 1명에게는 상패와 삼금 100만원이 주어졌다. 금년도 제30회 소방안전봉사상 수상자들의 공적을 간단히 소개한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.119-126
• /
• 1985

형상은 3차원이지만 2차원 문제로 이상화하여 해석할 수 있는 탄성구조물의 최적설계를 내연기관 연결봉(Connecting Rod)을 예제로 사용하여 진행하였다. 연결봉은 각 부위에서의 두께는 다르나 평면응력상태에 있다고 가정하였다. 연결봉의 질량을 최소화하기 위해 두께의 분포 및 2차원 모델 경계의 모양을 설계변수로 채택하였고 설계변수 및 응력치에 대한 제한조건을 적용하였다. 설계감도계수 계산을 위해 Variational Formulation, Material Derivative, Adjoint Variable이론을 도입하였고 최적화 방법으로는 Gradient Projection Method를 사용하였다. 최적설계 결과 현재 사용중인 연결봉 무게의 20%를 줄일 수 있음이 밝혀졌다.