• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.725-731
• /
• 2020

This study analyzed the impact of increasing orange imports on the domestic fruit markets, focusing on the period January to May when oranges were imported and sold intensively after implementation of the Korea-US FTA. In this study, only citrus fruits that compete with U.S. oranges were limited to domestic fruits; of these, Hallabong, which is consistent with consumption of U.S. oranges, was selected as an analysis target. A dynamic recursive simulation model was established to evaluate the ex-post effects of the Korea-U.S. FTA, and to conduct mid and long-term forecasts for the Hallabong market. In addition, major policy simulations were performed on the Hallabong market to assess the effect of each scenario. The ex-post impact evaluation reveals that between December and February, Hallabong had no effect on the seasonal tariff of oranges. However, from 2012 to 2017, the actual import decreased by 21.9 billion won annually due to the TRQ, with the accumulated 6-year decrease being 131.5 billion won. Major policy simulation analysis shows that the change in the unit cost of import due to the U.S orange crop and the increase of Hallabong export will help in expanding the market, and thus effectively increase income.

• Journal of Korean Classical Literature and Education
• /
• no.39
• /
• pp.99-135
• /
• 2018

This study aims at examining the discussions of Chilgeojiak, meaning seven vices that can be valid causes of divorce, and the discourse on a married couple shown in the deposal of Empress Kwak in Okhwangibong. The study first analyzes the relationship between the incidents of expelling wives from homes in the Joseon Dynasty Era and the seven vices. The divorce of Yi Mi and Shin Taeyeong and the deposal of Queen Yun by King Seongjong show that the standards of judgement in most of the seven vices are unclear or controversial. In Okhwangibong, the arguments about Chilgeojiak are examined through the form of a novel with the expulsion of Empress Kwak. Empress Kwak was deposed by her husband, Emperor Kwangmu, due to jealousy and evil deeds. However, she was devoted to her parents-in-law, bore sons, and above all, she was the emperor's first wife and had gone through hard times and supported her husband. Considering these circumstances, her deposal is not quite agreeable. Readers have the same question, and this has become a cause of the creation of a series. The reasons for Empress Kwak's jealousy lie in Okhwan-a jade ring, the existence of Empress Eum, and the partial love of Emperor Kwangmu. That is, it is not Empress Kwak's fault. Additionally, unrealistic elements involved in Empress Kwak's evil deeds and the story structure focused on her work as factors that make readers support Empress Kwak. Therefore, Okhwangibong displays the realities regarding the discourse of husbands and wives of the era rather than the love in Okhwan, the jade ring, between Emperor Kwangmu and Empress Eum. Such understanding continues to exist in the following series and is a valid problem in the present time.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.411-419
• /
• 2017

Stress concentration is one of the causes of the damage due to the large stress than the mean stress acting on the bar. This paper presents the results for stress of a stepped bar with a hole under torsional loading. The analysis for stress concentration and shearing stress was done by ANSYS Workbench which is a commercial finite element analysis software. The analysis results on fillet and hole are increased as the distance between them are become close. In addition, the distribution of the maximum equivalent stress developed in the fillet and hole in the outside range of the specific distance L (-100 mm ~ 300 mm) was almost constant in the models used in the analysis. On the other hand, the distribution of the maximum equivalent stress developed in the fillet and hole in the inside range of the specific distance L (-100 mm ~ 300 mm) was rapidly increasing and decreasing the change in the models used in the analysis. In addition, it was also possible to identify the location where the differences between equivalent stresses of hole and fillet occurred within a specific distance L (-100 mm ~ 300 mm). The analysis results of paper can used when selecting a hole location in a stepped bar under torsional loading.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.118-123
• /
• 2000

This paper describes the characteristics of a newly suggested arc-inducing driven rod with needles which could effectively spread out both the failure current with power frequency and the lightning current. The structural characteristic of the driven rod was that needles were attached on the surface of the conventional shaped driven rod and the driven rod with needles was installed inside of a copper pipe.As a result of analyzing the characteristics of this suggested driven rod when it was employed as the driven rod of an arrester in distribution system, it was verified that the primary voltage of the arrester was reduced by effectively exhausting the electrical energy since the arc occurred between the needle and the copper pipe.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.900-904
• /
• 2009

연구에서는 HEC-RAS 모형을 이용한 부등류 모의를 통하여 댐 방류수의 유하시간을 산정하고 이를 실시간 댐 방류수의 봉부자 추적실험에서 산정된 유하시간과 비교검증 하였다. 대상구간은 충주댐지점부터 여주대교까지 총 63.6km에 이르는 남한강 본류 구간으로 164개 단면으로 나누어 부등류 모의를 하였다. 유하시간 실험은 센서가 내장된 봉부자를 최초 시작지점에 투척하여 주요 교량에서 봉부자를 관측하여 최초 투척된 시간으로부터 교량을 통과하는 시간을 관측하는 방법을 사용하였다. HEC-RAS 부등류 모의 결과 2007년 8월 7일 방류량(680CMS)의 유하시간은 약 13시간으로 산정되었고 봉부자 추적자 실측자료를 통한 유하시간은 11.5시간으로 산정되어 실측치가 모의치보다 유하시간이 빠른 것으로 나타났다. 구간별로 살펴보면 HEC-RAS 모형의 모의결과는 수행교에서 충주조정지는 1.4시간 느리게, 목계교에서 남한강교는 1.0시간 빠르게 모의되었으나 나머지 구간에서는 실측치와 대체로 일치하였다. 본 연구는 유하시간 실험 구간 및 구간과 동일한 조건으로 모의함으로서 모형을 보정하기 위한 실측 유하시간 자료를 확보하였으며, 이러한 실측자료를 토대로 보정된 모형의 매개변수를 이용함으로서 대상 수계의 방류량별 유하시간을 산정하는데 정확성을 제고하고 홍수기 댐 운영 및 홍수예경보에 반영될 수 있을 것으로 기대된다.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.141-146
• /
• 1990

This study is on a seismic analysis of absorber rod in KMRR Reactivity Control Mechanism. The model being studied is two coaxial tubes(control absorber rod and flow tube) immersed in the water and partially coupled(overlap) by water gap. The hydrodynamic mass effects by the water in each surrounding conditions are considered in the model. The natural frequencies, stresses and displacements of the system due to Safe Shutdown Earthquake are computed in the cases of in-phase modes and out-of-phase modes of two coaxial tubes. The results show that maximum stresses are well below the allowable limit but the maximum displacements at the ends of both tubes are so much that the absorber rod contacts with the flow tube(or surrounding wall).

• Nuclear Engineering and Technology
• /
• v.23 no.3
• /
• pp.328-339
• /
• 1991

A multi-purpose research reactor called KMRR has been developed by Korea Atomic Energy Research Institute(KAERI) to generate a maximum thermal output of 30 MW. As a part of thermal hydraulics study, pressure drop characteristics of the longitudinally finned fuel rod bundles were experimentally investigated in a recirculating water test loop. The present study is focused on the investigation of fin effects on pressure drop and the development of pressure drop correlation for the finned rod bundles in a wide range of flow conditions. Friction factor correlations for each design of the finned rod bundles are developed. The value of friction factor for the finned rod bundles was higher than the analytical solution (64/Re) of laminar circular channel new but became lower than the Blasius equation as Reynolds number was increased.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1545-1551
• /
• 1992

This work is concerned with the prediction of turbulent friction factors in rod bundles. In this study, the Law of the Wall is assumed to be valid over the entire flow area. The flow channel is divided into element channels, and the algebraic form of the "Law of the Wall" is integrated over each element channel to yield an analytic expression for the pressure drop in the rod bundle. The method is applied to rod bundles with 1.2

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.445-452
• /
• 2012

In this study, experimental research was carried out to evaluate the structural performance of the reinforced concrete beam using strengthening materials (embedded FRP rod, metal fittings) in existing reinforced concrete buildings. Seven reinforced concrete beams comprised of retrofitted embedded FRP rod (BCR series), embedded FRP rod with metal fittings (BCR-AC series), and standard specimen (BSS) were constructed and tested under monotonic loading. Design parameters of test specimens were amount of embedded FRP rod and metal fittings. The test results showed that the maximum load carrying capacity of specimens with embedded FRP rod (BCR series) and embedded FRP rod with metal fittings (BCR-AC series) increased by 21~55% and 21~63%, respectively, in comparison with the standard specimen BSS. BCR series test specimens failed by the adhesion slip and concrete cover separation. BCR-AC series test specimens failed by the adhesion slip due to the confining effect of metal fittings.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.250-260
• /
• 1995

In general, a sintered rod is used as a feed in the growth of crystals by the floating zone(FZ) method. The sintering condition of the feed rod affected the stability of molten zone because it influenced the interface shape between the feed and the melt during the crystal growth. In this study, rutile and ruby crystals were chosen as samples to analyze the effect of the microstructures of the feed rods. In sintering of the feed rod for the growth of rutile and ruby single crystals, the difference of grain size between the inner and the outer region of the feed rod increased with the sintering temperature and dwelling time. As a result, it altered melting behavior of the feed. The uniform grain size of the sintered rod was necessary for the optimum growing condition of crystals. The effect of pores in the feed rod was not a dominant factor to grow crystals by the FZ method, which was confirmed by growing crystals with nonsinterd rods as feeds.