• Journal of the Korea Computer Graphics Society
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2016

The computational cost of clothing simulation and rendering is mainly depends on the type of mesh and its quality. Thus, quadrilateral meshes are generally preferred over triangular meshes for the reasons of accuracy and efficiency. This paper presents a method of quadrangulating sewing pattern based on the recursive geometry decomposition method. Herein, we proposed two simple improvements to the previous algorithms. The first one deals with the recursive geometry decomposition in which the physical domain is decomposed into simple and mappable regions. The second proposed algorithm deals with the vertex validation in which the invalid vertex classification can be validated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1532-1536
• /
• 2004

So far, the quantified elasticity data of textile fabrics has not been present because the measurement method depends on the knowledge of measurement operators. In this paper, the special manufactured measurement equipment using road cell is presented to measure the elasticity coefficient of textile fabrics in real time. The measurement method is based on the voltage differency among textile fabrics. The textiles with strong elasticity are high voltage produced from road cell. The others are low. The presented method can be applied to visualize the textile, sew the cloth, control quality of textile fabrics. Also, these measurement datum are used to B2B electronic trading system.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.6
• /
• pp.449-453
• /
• 2009

This study focused on the content characteristics of regulated hazardous substances in specific wastes. Regulated heavy metal such as Cu, Pb, Cd analyzed the 108 waste samples that it choice from the representative facilities. Analytical method used content test method, suggested on the basis of analytical method of developing country, and the results as compared with limited standard in Austria Petroleum, primary metalworking and electronic industry had high content of Cu more than 100 mg/kg of Austria limited standard. Pb detected high level concentration the sample that dust producted at Primary metalworking industry. In case of total Cr was show that high content at KSIC 18, 19, 23 etc but result analyzed Cr(VI), it was shown that high level at dust producted from sewing clothes and fur industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.590-596
• /
• 2020

The fabric used for military winter inner clothing(top) is quilted with padded cotton to provide warmth. This quilting fabric is generally manufactured with yarns that intersect and are sewn substantially between the fabric and cotton. Thus, it is impossible to separate the fabric and cotton once after the quilting fabric is manufactured, which can result in a significant loss of fabric and cotton when separated. In this study, after fabricating the quilting fabric, we investigated a method to stabilize change rate of thickness and increase the warmth keeping property through subsequent processing without damaging the fabric. A relatively method of passing the quilting fabric through a part of the cotton production facility was used generally, and the following results were obtained. This indicates that after the quilting fabric was manufactured, the warmth keeping property was improved through the subsequent processing steps, so that the change rate of thickness due to washing was stabilized.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.9_10 s.157
• /
• pp.1485-1493
• /
• 2006

This study was to investigate the effect of different scouring methods on mechanical properties and appearance of lyocell. Two different scouring methods were adopted for the study; one was the traditional scouring with alkali and the other was enzymatic scouring. Enzymatic scouring was carried with four different enzymes; C1 : Cellusoft L, C2 : Cellusoft UL, D1 : Denimax 992L, D2 : Denimax Acid XCL. The mechanical properties of scoured lyocell were measured using KES-FB. The appearance of scoured samples was analyzed by 3D CAD SYSTEM of i-Designer. While the untreated fabric showed the best linearity because it is stiff, alkali treated samples showed the worst dimensional stability and distorted easily. Enzyme treated samples, especially C1 treated samples showed the best dimensional stability. In addition, enzyme treated samples showed low bending rigidity compared to the alkali treated samples. It means that the enzyme treated samples are more flexible than alkali treated samples. However, the smoothness of the sample's surface treated by either of methods did not show much difference. From the study, it was suggested that the enzymatic scouring for lyocell could help to gain natural silhouette.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.2
• /
• pp.31-48
• /
• 2007

The purpose of the this study is to make a historical review of changes in the structural decorations of men's costume from ancient times to modern times and to provide basic materials for developing handicraft decoration techniques and sewing methods in contemporary fashion. Their gorgeousness of collars and sleeves reached its peak along with the exaggerated expression of the human body during the Renaissance when people were free from Christian traditions of the Middle Ages and pursued human pleasures. Huge and decorative collars gave great dignity and formality to the wearer. Sleeves were slim and cuffs were small or nonexistent after the French Revolution. Various decorated pockets had been developed since pockets began to be attached to coats in the 17th century. Pockets were at the bottom of coat in the late 17th century, but they were gradually placed much higher on the coat. Buttons began to be used as the tool for sticking fast body to clothes in the 12th century and became extremely sumptuous accessories in the $16th{\sim}18th$ centuries. Men's clothes were simpler and more practical after the French Revolution. The result was that decorative buttons begun to disappear and metal buttons came out for practical purpose. The number of buttons worn on sleeves was also noticeably reduced. This research suggested the possibility that various decoration techniques could create the unique details in the each part of clothes. In order to develop high value-added products, we need to study various decoration-sewing methods and put to practical use them for creative fashion design.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.239-242
• /
• 2009

최근 3 차원 측정 기술을 활용한 운동 기능성의 향상을 위한 연구가 활발히 진행되고 있다. 그 예로 3 차원 인체 정보를 이용한 의복패턴 제작 시에 필요한 절개선으로 피부상에서 동작 시 늘어나지 않는 선(Lines of Non-Extension, LoNE)을 찾아내어 활용한 연구가 발표된 바 있다. 이러한 LoNE 은 기존 의복구성을 위한 봉제선이나 기능선으로 활용될 때 동작기능성을 저해하지 않는 특징이 있다. 이에 본 연구에서는 스포츠웨어에서 활동성이 큰 상체의 어깨부위에서 Lines of Non-Extension 을 탐색하고자 하였다. 연구 방법으로는 20 대 후반 남성 2 명을 대상으로 체표의 등 부분에서 3cm 간격으로 계측점을 표시한 후 3D 인체 데이터 (Cyberware, WB)를 획득하였다. 측정시의 자세는 팔을 $30^{\circ}$, $90^{\circ}$, $135^{\circ}$, $180^{\circ}$ 외전시켰다. 피부 표면에서의 길이 변화는 구획의 크기를 달리하면서 가로, 세로, 사선방향으로 동작에 따라서 측정하였다. 변화량은 정자세($30^{\circ}$)를 기준으로 A 라 하였을 때, 기준자세와의 차이가 가장 큰 변화량을 보인 자세를 B 라 하고 A 와 B 간의 차이로 계산하였다. 연구결과, NASA 의 Biosuit 에서 소개된 Iberall(1970)의 LoNE 중 진동둘레를 포함한 팔 부위와 등, 어깨 부위에서 유사한 라인을 찾았다. 본 연구에서와 같이 구획별 사선방향 피부 변화량을 측정하는 것은 피부면에 숨겨진 인간공학적 의복 기능선을 탐색하는 데 효과적임을 확인하였다.

• Korean Journal of Occupational Health Nursing
• /
• v.1
• /
• pp.5-16
• /
• 1991

본 연구는 산업간호사의 역할 확대에 따른 교육과정의 개선 및 보수교육 프로그램의 모색을 위한 기초자료로서 기본간호교육과정에서의 산업 간호교육 실태를 파악하고자 시도되었다. 구체적으로는 첫째, 기본간호교육과정의 일반적 특성을 파악하였으며 둘째, 지역사회간호학의 학습내용을 파악하였고, 세째, 산업 간호교육실태를 분석하였다. 연구방법은 먼저 1991년 2월 18일 부터 2월 25일까지 기존 문헌을 토대로 기본 간호교육과정의 일반적 특성과 지역사회간호학의 학습내용을 파악하였고, 산업 간호교육 실태에 대해서는 2월 26일부터 3월 15일까지 전국에 있는 간호교육기관을 대상으로 작성된 조사표에 의해 전화 또는 서신으로 자료를 수집하였다. 조사 결과는 다음과 같다. 1) 연구의 대상 산업간호교육 실태조사의 대상은 조사에 응답한 간호교육기관 41개교로서 '90년 현재 전국 간호교육기관의 66.1%를 차지하는 것이다. 교육과정별로는 간호대학 14개교 전문대학 27개교였고, 지역별 분포에 있어서는 대학과정 중 6개교(42.9%)가 서울에 있으며 전문대학의 경우 전남 6개교(22.2%), 경북 5개교(18.5%)의 순으로 나타났다. 2) 간호교육과정의 특성 기존의 연구결과를 토대로 교과목 분포 및 주전공 교과목의 내용을 파악하였다. 대학과정의 경우 평균 141.3학점, 전문대학의 경우 평균 120학점이 필수 이수 학점인 것으로 나타났고, 두 경우 모두 전공교육에 관한 학점이 총 이수학점 중 대학 55.5%, 전문대 57.2%를 차지하였다. 주전공 교과목 중에서는 성인간호학 및 실습, 기초간호과학 및 실험, 모아간호 및 실습, 지역사회간호학 및 실습, 정신간호 및 실습의 배당 학점이 특히 많았다. 3) 지역사회간호학의 학습내용 산업간호 교육의 기본 개념틀올 제시하고 있는 지역사회간호학은 체계이론과 Stevens의 간호이론을 토대로 개발된 모형을 중심으로 살펴 보았는데 이 모형에 따르면 산업간호는 지역사회간호 문제의 하나로 다뤄지고 있다. 4) 산업간호 교육 실태 조사 대상 학교 모두 산업간호에 관한 내용을 강의에서 다루고 있었으며, 6개 학교에서는 실습도 병행된 바 있다. 강의는 주로 전문대의 경우 3학년(22개교), 2학년(5개교)에서, 대학의 경우 모두 4학년에서 이루어졌다. 산업간호 강의의 편성형태는 36개교(87.8%)가 지역사회간호의 일부로 다루고 있었으며, 강의시간수는 5~9시간이 19개교(47.5%)로 가장 많았다. 강의시간에 주로 사용되는 교재로는 교수가 직접 작성한 참고자료나 보건학강좌, 산업보건학 등이 사용되었다. 강의내용 또한 매우 다양한 것으로 나타났는데, 특히 전문대학의 경우가 더욱 다양했으며, 전반적으로는 산업간호사업, 산업간호개념, 직업병관리가 가장 많았다. 한편 실습운영에 있어서는 산업체의 비협조 또는 거리상의 문제 등이 어려운 점으로 지적되었다. 실습대상인 업체로는 종이제조업, 제철업, 신발제조업, 전자업체, 봉제업체, 관공서, 유리제조업체가 있었고, 주로 1주일간 실습지침서를 이용한 현지 교수 중심의 지도와 1,2회의 conference에 의해 이루어졌다. 그러나, 1일 견학하는 정도로 운영하는 학교와 선택 학점으로서 3주동안 실습을 하도록 하는 경우도 있었다. 이상의 결과를 바탕으로 다음과 같은 결론을 내릴 수 있겠다. 첫째, 전반적인 전공교육과 특히 지역사회간호학을 통해서 산업간호사의 업무 수행에 필요한 일반적인 능력이 길러지고 있다고 볼 수 있다. 둘째, 산업간호사의 업무 중 보다 전문적인 지식과 기술을 요하는 부분에 대해서는 산업간호라는 교과를 통해 보다 체계적으로 다루어져야 할 것이다. 따라서, 이에 사용될 수 있는 교과서의 개발, 실습현장의 마련, 시간 및 학점의 증가 등이 시급히 이루어져야 하겠다.

• Science of Emotion and Sensibility
• /
• v.14 no.2
• /
• pp.221-226
• /
• 2011

Although diverse researches on sensing method of human movement have been performed, there are still many limitations to the existing methods. As a part of supplementing the limitations to the existing motion sensing methods, this study aimed to execute an exploratory examination on a POF-based sleeve-shaped motion sensor for less restrictive sensing of human movement. In this study, a set of POF-based motion sensor, which was embedded in a sleeve-shaped platform was devised, and a set of exploratory experiments was performed on the possibility of sensing of human movement as diverse as in daily life, through this device. The scope of this research was limited to an exploration on the possibility and basic elements of POF-based sleeve-shaped motion sensor, while the influence of sleeve patterns, those of wearer's somatotype, those of sewing method were not studied in this study. When compared to the pre-existing methods, the POF-based motion sensor platformed on sleeve in this study, which was purposively devised to be applied to the motion sensing clothing shows some beneficial characteristics : more sensitive measurement on human motion, low cost, no timely restriction in sensing, no request for gigantic apparatus and space for sensing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.493-503
• /
• 2018

Recently, as living standards have improved, many people are becoming more interested in health, and self-training is increasing through exercise to prevent and manage pre-illness. In general, an imbalance of muscles causes asymmetry of posture, which can cause various diseases by accompanying an adjustment force, circulation action, displacement of internal organs, etc.. In this study, the development of fitness software that can be self - training among smart wears has attracted considerable attention in recent years. In this study, a technology was proposed for the commercialization of self - trainer fitness wear by a simulation through Android - based applications. Self - trainer fitness software was developed by combining a conductive polymer, fashion design, sewing, and electric and electronic technology to monitor the unbalance of the muscles during exercise and make smart wear that can calibrate the asymmetry by oneself. In particular, a polymer sensor was fabricated by deriving the optimal MWCNT concentration, and the electrode signal was collected by attaching the electrode to the optimal position, where the electrode signal line using the conductive fiber was designed and attached to collect the signal. A signal module that converts the bio-signals collected through electrical signal conversion and transmits them using Bluetooth communication was designed and manufactured. Self-trainer fitness software that can be commercialized was developed by combining noise cancellation with Android-based self-training application using a software algorithm method.