• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.91-91
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1025-1028
• /
• 2001

In this report, a new method compounding the electrolytic machining with ball end milling process to increase the machining efficiency was introduced. From the experimental result, it was confirmed that effect of cutting force reduction and finer surface roughness can be obtained in a certain condition of ball end milling and electrolytic machining conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.959-962
• /
• 2000

A new method compounding the electrolytic machining with ball end milling process to improve machined surface toughness was examined. From this study, it was confirmed that much smaller cutting force and finer surface roughness can be obtained in a certain condition of ball end milling and electrolytic machining conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.261-261
• /
• 2004

본 논문에서는 고속가공 시 필랫(코너-R) 엔드밀의 곡면가공 적용가능 여부를 연구하기 위하여 비교적 곡률이 완만한 곡면을 채택하여 가공실험을 수행하고 고 결과를 분석하였다. 가공재료는 금형의 재료로 많이 사용되는 SKD11 강을 선택하였다. 볼엔드밀과 필렛엔드밀의 비교를 위하여 2 종류의 공구에 동일한 가공조건으로 가공실험 하였다. 가공 중 측정된 절삭력과 가공면의 표면조도를 분석하여 일반적으로 황삭에서 주로 사용되던 필렛엔드밀을 곡률이 완만한 곡면의 정삭에 적용하였을 경우의 절삭특성과 볼엔드밀의 가공특성을 비교하였다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.60-60
• /
• 2003

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.268-273
• /
• 2000

In this report, a new method compounding the electrolytic machining with ball end milling process to increase the machining efficiency was introduced. And the cutting characteristics by electrolytic machining conditions was examined. From the experimental results, it was confirm-ed that effect of cutting force reduction obtained at the condition of transpassive state of electrolytic machining conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.2
• /
• pp.123-134
• /
• 1995

In this paper, the fast force algorithm has been studied so that it is used to calculate cutting forces and to develope the NC verification system. The NC verification using the fast force algorithm can verify excessive cutting force which is the cause of deflection and breakage of tool, and adjust the feed rate and spindle speed.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.5 s.170
• /
• pp.167-174
• /
• 2005

High-speed machining is one of the most effective technologies to improve productivity Because of the high speed and high feed rate, high-speed machining can give great advantages for the machining of dies and molds. This paper describes on the analysis and evaluation of cutting force in high-speed machining. Cutter rotation directions, slope directions, spindle revolution and depth of cut are control factors for cutting force. The effect of the control factors on cutting force is investigated for the high speed machining of STD11.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.198-203
• /
• 1992

There are two important variables in machining process control, which are feed and cutting speed. It is possible to improve the machining accuracy and the productivity by maintaining the optimal feed and cutting speed. IN this work, a controller is designed to achieve on-line cutting force control based on the modeling of cutting process dynamics established through step response test. Two schemes are proposed and implemented. The first is feed control under the constant spindle speed and the second is spindle speed control under the constant feed. Finally, both are proved to work properly through simulation and experimentation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.31-32
• /
• 2011