• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.169-173
• /
• 2011

This study is about the development of remote controlled bollard using the BLDC motor and ball screw with mechatronics theory. A bollard is composed of the sensor part and the control part. The sensor part is consisted of sensors that detect the locations of a bollard. The role of the control part is adjusting motor speed and power through variable resistance. In order to confirm required performance, the speed of decent and ascent of the bollard, the time and the RPM of BLDC motor were tested according to the variable resistance and the applied load with 10 to $72kg_f$.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.19-27
• /
• 2013

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.604-610
• /
• 2006

Common structural rules of JBP(Joint Bulker Project) and JTP(Joint Tanker Project), which will come into effect in 2006, invoke the necessity of the ultimate limit state(ULS) design for ship structures. Even though the many applications of ULS analysis have been performed for ship structures, there have few studies carried out for deck machineries and their supporting structures. Recently four major Korean shipbuilders(DSME, HHI, HHIC, SHI) jointly developed and proposed a new design standards for mooring fittings and also proposed the SWL (Safety Working Load) obtained based on the first yield criterion. In this study, various ultimate strength analyses were performed for bollards and their foundation structures whose yield strengths were quantified by the research consortium. Prior to performing the ultimate strength analyses, the numerical calculation method was substantiated with the test results provided in the joint work report. Based upon the results of this study, it can be concluded that the reinforcements to increase the yield strength are not always resulted in the enhancement of the ultimate strength. Furthermore, the additional production costs for the reinforcements can not be rewarded by the ultimate strength. Therefore, another alternative arrangements should be developed in the view point of ultimate strength.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.599-607
• /
• 2021

Street-view images, which are omnidirectional scenes centered on a specific location on the road, can provide various obstacle information for the pedestrians. Pedestrian network data for the navigation services should reflect the up-to-date obstacle information to ensure the mobility of pedestrians, including people with disabilities. In this study, the object detection model was trained for the bollard as a major obstacle in Seoul using street-view images and a deep learning algorithm. Also, a process for updating information about the presence and number of bollards as obstacle properties for the crosswalk node through spatial matching between the detected bollards and the pedestrian nodes was proposed. The missing crosswalk information can also be updated concurrently by the proposed process. The proposed approach is appropriate for crowdsourcing data as the model trained using the street-view images can be applied to photos taken with a smartphone while walking. Through additional training with various obstacles captured in the street-view images, it is expected to enable efficient information update about obstacles on the road.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.950-957
• /
• 2023

For safe mooring and towing between the ship and port, the equipment must be designed in accordance with the relevant international regulations. However, some small shipyards and engineering companies often do not fully comprehend the core contents. Therefore, the international regulations regarding towing and mooring equipment are reviewed and the bollard and chock are newly developed based on the Mooring Equipment Guideline 4 (MEG4) standards. A bollard is a mooring equipment used to fix a mooring rope to the hull. It has two columns and is mostly used in a figure eight pattern knots under the mooring condition. The chock, which is used to change the mooring rope direction coming into the ship from outside, is manufactured using a casting with curvature. The two mooring equipment are widely used in the stern, bow, and mid-side. Owing to the increase in the size of container vessels and LNG ships, the mooring rope load has increased and the safe working load of the mooring equipment must be revised. This study summarizes and examines the results of the allowable stress method obtained using finite element analysis modelling. To consider the mesh size effect, a reasonable criteria was suggested by referring the existing class guidance. Additionally, the safe working load was verified through nonlinear collapse analysis, and the elastic region against load increments was confirmed. Furthermore, the proposed evaluation method can be used to develop similar equipment in the near future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.94-99
• /
• 2010

광양제철소의 광양만 제품부두에 접안하여 양하역 할 대상선박에 대해 여러 가지 해상조건에 대해 계류해석을 수행하였으며, 이를 통해 광양만 부두에서의 계류 적정선박을 선정하기 위한 기준 설정의 기초자료를 만들기 위해 노력하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.162-164
• /
• 2008

대학구내 공원시설은 학생들과 시민들의 다양하고 안전하게 사용할 수 있도록 여러 시설을 갖추고 있어야 하며 야간에도 활용 가능케 조명시설을 갖추고 있어야 한다. 본 논문에서는 소공원내의 산책로에서는 볼라드 타입 메탈할라이드 50[W]를 지그재그 배열로 배치하였고, 운동기구에서는 안전성 확보를 위하여 메탈할라이드 400[W]를 7개를 설치하여 조명 계획을 검토하고 설계하였다. 산책로와 운동시설에 대한 시뮬레이션 결과를 활용하여 안정적인 조명모델을 제시 하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.3
• /
• pp.158-166
• /
• 2021

In this paper, a numerical analysis technique using a body force model is investigated to estimate the available net thrust of multi-pod-driven ice-breaking vessels under bollard pull and overload conditions. To employ the body force model in present flow simulations, drag and thrust components acting on the pod unit are calculated by using Propeller Open Water (POW) test data. The available net thrusts according to the direction of operation are evaluated in both bollard pull and overload conditions under deep water. The simulation results are compared with the model test data. The available net thrusts, calculated by the present analysis for ahead operating modes at 3~6 knots which are typical speeds of the target vessel in arctic field, are agreed well with the model test results. It is also found that the present result for astern operating mode appears approximately 6 % larger than the model test result. In addition, the available net thrusts are calculated under the both operating conditions accompanied by shallow water effects, and the main cause of the difference is studied. Based on the result of the present study, it is confirmed that the body force model can be applied to the performance evaluation of multi-pod propulsion system and the main engine selection in early design stage of the vessel.

• Journal of Power System Engineering
• /
• v.19 no.5
• /
• pp.25-31
• /
• 2015

This study deals with optimal conditions for design parameters of the multistage bollard with up and down installed on the street to protect pedestrians or stop cars. FE simulation and Taguchi method are used to achieve the optimization for the automatic multistage bollard to minimize effective stress caused by the external force. Thickness, height of stage 2, diameter and over-all height which affect its structural strength are chosen as design parameters. According to the experiments combined by orthogonal array, each of the effective stresses is evaluated. And the results are analyzed by using the signal to noise ratio concept of Taguchi method. From their results, the optimal combination of design parameters are proposed.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.385-388
• /
• 2011

This study is about development of remote controlled bollard using the BLDC motor mechatronics theory. A bollard is composed of the sensor part and the control part. The sensor part is consisted of sensors that detect the locations of a bollard. The role of the control part are adjusting motor speed and power through variable resistance. In order to confirm required performance, The speed of decent and ascent of the bollard, the time and the RPM of BLDC motor were tested according to the variable resistance and the load.