• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.1
• /
• pp.40-45
• /
• 1996

본 연구는 공정제어를 위한 복합형 퍼지-PID 제어기의 개발에 관한 것이다. 제안된 복합형 퍼지-PID제어기는 퍼지 규칙을 기반으로 한 이득 결정부분({{{{ { K}_{p } { K}_{d } }}}})과 고정이득({{{{ { K}_{i } }}}})을 합친 제어기이다. 모의 실험 결과 제안된 제어기는 고정된 파라메터를 갖는 전통 PID 제어기에 비해 더욱 양호한 제어성능을 나타내었다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.157-163
• /
• 2022

The demands for Home Meal Replacement (HMR) products are continuously increasing owing to the convenience of instant food and online food delivery. Ready-to-heat (RTH) products have received massive attention in the HMR industry because these products can be easily warmed using a microwave oven. However, the conventional microwave packaging should be opened before microwave heating to prevent bursting or food loss owing to the steam-pressure build-up inside the package. Open packaging might lead to non-uniform food heating and cross-contamination. Therefore, packaging materials that are able to release steam without opening are of interest to the HMR industry. In this study, polylactic acid(PLA)/polyethylene glycol(PEG)/nanoclay composite films were manufactured using an extrusion method as packaging materials with a smart steam-releasing function. The introduction of PEG to the PLA imparted a steam self-releasing feature to the composite films owing to the morphology change of composite films during microwave heating. Further, PEG increased the ductility of PLA, which in turn prevented bursting caused due to the steam-pressure build-up. The uniform dispersion of nanoclay obtained by a twin-screw extrusion led to stronger mechanical properties. Therefore, the smart composite films developed here can be applied as microwave packaging materials with a self-releasing function.

• Journal of the Korean Society for information Management
• /
• v.33 no.4
• /
• pp.77-101
• /
• 2016

Recently, attention has been drawn to a new form of a public library, that is, a public library in a complex facility constructed in the same building or site with another facility. To get active users' or local governments' supports in the public library in a complex facility, it is necessary to build library strategic plans based on the analysis of users' evaluation and demands. Thus, this study analyzed the user satisfaction and perception of the 28 public libraries in complex facilities in Seoul. As a result, it was found that most users overall satisfied with public libraries in complex facilities in terms of human resources, information resources, and the links among services and positively perceived their environments and services. In order to provide more satisfaction to the users in public libraries in complex facilities first, it is necessary to improve the accessibility of libraries, to secure the sufficient library space, to prevent the outside noise, to link the facilities which bring mutual synergistic effect, and to develop a program and service accompanying other facilities.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.1
• /
• pp.89-114
• /
• 2020

This research is a basic study to understand the current state of the complex cultural space in the public library and the programs in operation and to explore ways to activate the programs by complex cultural space based on the understanding of the public libraries that formed the complex cultural space. Thus, a survey was conducted on librarians of public libraries that had complex cultural space within the library and found that there were a number of educational, exhibition, and performance spaces, and in the same vein, there were a lot of related programs being run in the complex cultural space. However, due to the lack of personnel in charge and budget, difficulty in developing programs, low participation in the programs, and lack of cultural facilities and materials, the substantialization of complex cultural space management seems to be lacking. Therefore, it will be required to set the goals and visions for the complex cultural space in libraries and to secure space, manpower, budget, and promotional efforts to reinvigorate the complex cultural space in the future.

• Composites Research
• /
• v.26 no.3
• /
• pp.182-188
• /
• 2013

The purpose of this study was to measure the volumetric polymerization shrinkage kinetics and stress of a silorane-based dental restorative composite and compare it with those of conventional methacrylate-based dental composites. Two methacrylate-based composites (Z250, Z350 flowable) and one silorane-based composite (P90) were investigated. The volumetric polymerization shrinkage of the composites during light curing was measured using a laboratory-made volume shrinkage measurement instrument based on the Archimedes' principle, and the polymerization stress was also determined with the strain gage method. The shrinkage of silorane-based composites (P90) was the lowest, and that of Z350 flowable was the highest. Peak polymerization shrinkage rate was the lowest in P90 and the highest in Z350 flowable. The time to reach peak shrinkage rate of P90 was longer than those of the methacrylate-based composites. The polymerization shrinkage stress of P90 was lower than those of the methacrylate-based composites.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.951-956
• /
• 1997

Vacuum Hot Pressing을 이용하여 제조한 TiNi형상기억섬유 강화 6061 AI기지 복합재료를 제조하고 미세조직 및 기계적 특성 등을 연구하였다. 제조된 복합재의 항복응력은 예비변형량, 섬유체적율 및 열처리에 따라 증가하였다. 복합재의 지적특성은 예비변형이 가하여진 후 재가열되었을 때 기지 내 TiNi 섬유의 형상기억효과에 의한 압축잔류응력 발생에 기인된다. 미세조직 관찰 섬유와 기지 사이에는 AI$_{3}$Ti및 AI$_{3}$Ni의 금속간화합물층이 관찰되었다. 또한 시험온도 증가와 더불어 TiNi섬유강화된 복합재의 유동강도는 높은 값을 나타내었다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.460-467
• /
• 2003

Al-SiC$_{p}$ composite layer was prepared by plasma thermal spray on aluminum substrate using composite powder prepared by mechanical alloying. Mechanically alloyed powder was achieved after 24 h milling, which was used for thermal spray coating. The correlations between process conditions and thickness/porosity were analyzed, and increase of hardness was confirmed. The presence of Al-Si-C-O compound was detected by TEM analysis.

• Korean Journal of Materials Research
• /
• v.6 no.10
• /
• pp.1034-1042
• /
• 1996

본 연구에서는 인산코팅된 것과 되지 않은 OXI-PAN섬유를 사용하여 제조된 무질서 배향의 OXI-PAN/페놀수지 복합재료를 불활성분위기의 여러 열처리온도에서 탄화하였을 때, 섬유표면에 인화합물의 존재 유.무가 복합재료의 물리적특성 및 미세구조 변화에 미치는 영향을 조사하였다. 두 종류 복합재료의 물리적특성 변화를 탄화온도 영향에 대한 섬유와 매트릭스 및 그 계면에서의 미세구조 거동변화와 기공형성의 관점에서 해석하였다. 열처리시 온도상승에 따라 섬유와 매트릭스 계면에서의 화학반응에 의해서 그 구분이 점차 사라지면서 국부적으로 치밀하고 균일한 상을 이루고 있는 것으로 조사되었다. 또한, 탄화 조건에서도 인산코팅은 OXI-PAN 섬유의 직경의 감소를 억제하고 열안정성을 향상시키므로 복합재료의 부피수축률을 줄이고 탄화수율을 증가시키는데도 어느정도 기여할 수 있으리라 판단되었다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.2
• /
• pp.10-15
• /
• 2011

본 논문은 위성항법신호감시국용 GPS/갈릴레오 복합수신기에 대한 구현 및 성능 시험결과를 기술한 논문으로 복합수신기는 단일 플랫폼에서 갈릴레오 E1, E5a 신호와 GPS L1, L2C, L5 신호를 수신처리 할 수 있으며, GPS신호와 갈릴레오 E1 신호를 복합적으로 처리함으로써, 위치정확도가 향상됨을 보였다. 각 신호에 대한 신호획득을 신속하게 하기 위해, 모든 신호에 대해 정합필터와 FFT 방식이 결합된 방식을 적용하였고, 신호추적과정에서는 다수의 추적루프를 적용하였으며 본 논문에서는 주요 신호에 대한 신호획득 및 추적과정의 시험결과를 보였다. 또한 기존에 발표된 논문과의 차별화 항목으로, 항법신호의 수신레벨이 낮아 CW 형태와 같은 간섭신호에도 영향을 받는바, 이에 대한 개발된 항재밍 모듈에 대한 시험결과도 제시하였으며, 성능측면에서의 비교를 위해 상용수신기와 개발된 수신기와의 성능 비교 결과도 함께 제시하였다.

• Korean Journal of Materials Research
• /
• v.7 no.8
• /
• pp.687-693
• /
• 1997

4방향성(4D)탄소섬유 프리폼을 각각 polyfurfury1 alcohol과 석탄계 핏치로 함침하는 방법과 CVI방법에 의하여 열분해 탄소로 증착하는 방법을 채택하여 4방향성 탄소/탄소 복합재를 제작하였다. 아크플라즈마 토치 및 지상연소 시험에 의하여 이들의 삭마특성을 비교 관찰하였다. 4D 탄소/탄소 복합재의 기공도는 밀도가 증가할 수록 감소하였으며, 고밀도화된 시편일 수록 삭마저항성이 우수하게 나타났다. CVI-핏치계 4D 탄소/탄소 복합재가 내삭마 성능이 가장 우수하였다. 삭마거동은 결합재의 종류와 복합재의 밀도 및 기공도에 크게 의존함을 알 수 있었다.