• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.822-828
• /
• 2013

In this paper, a multi-modem for process automation of non-destructive inspection (NDI) which possibly generates various kinds of data is implemented and verified. Here, a variety of data such as control signals, text data, image data generated by inspection devices, sensors, computers are transmitted to the multi-modem via serial, Ethernet, and coaxial cable. We exploit a communication network in which powerlines are used as backbone transmission media. Thus, the implemented multi-modem has various ports and corresponding interfaces for data transmission. As a result of practical experiments, the multi-modem maintains almost constant data rate with little waveform distortion. In addition, the experiments confirm that the modem operates normally under extreme variation of temperature. It is, therefore, considered that the multi-modem can contribute significantly to implement powerline communication (PLC)-based process automation for NDI in which various kinds of data are practically generated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.345-347
• /
• 2015

인공위성은 다양한 센서장치, 구동장치, 전자장치들로 구성되어 있으며, 위성을 제어하는 컴퓨터 장치는 이들 장치들과 다양한 종류의 통신 버스로 연결되어있다. 정의된 프로토콜에 따라 명령을 전송하고 장치들의 상태 정보를 수집하여 위성을 운영한다. 위성에서 많이 사용되는 대부분의 상용 센서나 구동장치들은 표준화된 버스 (ex, 1553B, CAN, UART, etc ...) 인터페이스를 지원한다. 그러나 위성의 임무나 설계에 맞게 특수하게 제작된 장치의 경우는 범용의 버스보다는 용도에 적합한 프로토콜이 설계되고 제작된다. 본 논문에서는 2018년 발사 예정인 정지궤도복합위성 컴퓨터 장치 (GMU) 내의 프로세스 모듈과 시스템의 이상상태를 감지하여 GMU의 운용 모드 및 형상의 변경을 담당하는 MRE 모듈사이의 통신을 담당하는 IMGL 설계를 소개하고 IMGL 운영을 담당하는 소프트웨어 설계 및 구현 내용을 기술한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.87-90
• /
• 2016

현재 한국 군부대에서 사용되고 있는 표적구동장치는 1990년도에 만들어진 재래식 장비로서 노후화 및 부품교체 난제로 인하여 지속적인 시스템의 오류와 이에 따른 장비 가동률 저하 등의 문제로 실전적인 사격 훈련이 어렵다. 이에 본 연구에서는 보다 효과적인 훈련을 진행하고자 복합 구동 표적장치를 개발하였다. 본 연구에서 개발된 복합 구동 표적장치는 Up-down, Swing, Turn, Rotary 방식의 표적 구동을 원격으로 제어하여 다양한 사격 및 전술 훈련 적용 가능하도록 제작되었으며, 또한 사격진행 통제 결과를 통제관 혼자서 총괄 운용이 가능한 모니터링 시스템을 구축하였다. 그리고 현재 각 부대에 설치되어 있는 표적구동장치 및 전술훈련 컨트롤러는 유선을 통한 시리얼통신 및 중앙 분배식 전원공급시스템으로서 운영설비를 위하여 과도한 배관배선 등의 공사가 별도로 시행되어야 하는 문제점이 있다. 따라서 본 연구에서는 이러한 문제점을 해결할 수 있도록 무선 통신시스템방식을 적용하여 다양한 훈련지역에 호환 적용될 수 있는 장비를 개발함으로써 훈련장 시설건립을 위한 부담을 줄이고, 운영의 극대화를 확보할 수 있도록 경제적, 기술적 효과를 추구하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.10a
• /
• pp.1031-1034
• /
• 1996

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.06a
• /
• pp.854-857
• /
• 1996

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.107-115
• /
• 2013

Smart appliances with multi-media and telecommunication equipments provide users complicated convenience functions. On the contrary, 8-bit controller-based low performance electronics still cannot afford such multimedia and telecommunication. If we find a way to have low-end electronics connected and provide complicated functions, they can be also made "smart". Fortunately, 8-bit controllers used in low-end appliances have UART, which can be connected to any of BlueTooth, Wi-Fi and ZigBee communication modules which can, in turn, communicate with smart devices. Any communication module can be attached to the low-end electronics due to the variety of smart devices' connectivity at the other side. Although the convenience functions seem complicated, they are actually macros in a script form composed of micro commands which implement the base functions of appliances. Since the kinds of the base functions are not that many, the low-end electronic appliances will become "smart" if their control program can be extended to execute sequentially the micro commands in any combination. Such simple innovation has not seen the world, until now due to the overhead of the additionally required hardware such as display devices and buttons. The high-quality display and touch screen functionalities of smart devices can replace the required hardware, and remove the overhead completely. In fact, the low-end appliances become smart as if an "evolution kit" is newly equipped.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.631-634
• /
• 2012

디지털 복합기는 프린터, 복사기, 스캐너, 팩스 등의 장치가 결합되어 있는 임베디드 장치로써 출력, 복사, 스캔, 팩스 외에 네트워크 통신을 이용한 원격 유지보수, 다중 사용자가 맞물려 있는 장치이다. 이러한 디지털 복합기는 최근 기업 및 공공기관에서 업무의 효율성 증대와 경비절감을 위해 중요한 문서를 처리하는 장비로 널리 보급되고 있다. 하지만 산업 스파이나 공격자들에 의해 중요한 문서들이 외부로 유출되면서 기업의 피해가 증가하고 있다. 따라서 본 논문에서는 디지털 복합기에서 발생할 수 있는 다양한 보안 취약점 및 보안 위협을 기밀성, 무결성, 가용성, 부인방지 측면에서 분석하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1831-1838
• /
• 2015

In this paper, a method of implementing a communication network in ship, which exploits a powerline-based legacy-line communication system (LLC), is presented. We develop an inductive coupling unit and a multi-interface device to connect a data communication terminal to the powerline. As a result of operation tests for the ship under working, the implemented LLC shows a transmission rate of at least 25.8 Mbps in the distance of 200 m away with 100% success rate. Thus, the system can be a useful alternative to implement a communication network in ship without additional channels. Being easy to be implemented and supporting various interfaces for data communication, the presented system will be very effective when a real-time monitoring system is launched in future digital ship.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.19-28
• /
• 2022

In this study, three types of combined isolator consisting of High Damping Rubber Bearing (HDRB) and wire isolator were developed for Uninterruptible Power Supply system (UPS). The dynamic characteristics of the combined isolator were investigated through one-axis shaking table test. The input acceleration were generated in accordance with ICC-ES AC156 code. Scale factors of the input acceleration were designed to be 0.5-2 times the required response spectrum defined in ICC-ES AC156. Based on the test results, damage and dynamic characteristics of the UPS were investigated: including natural frequency, damping ratio, acceleration time history response, dynamic amplification factor and relative displacement. Based on that, it was found that the combined isolator developed in this study could improve the seismic behavior of the UPS, in particular, the response acceleration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.635-638
• /
• 2014

As ICT-convergence deploying projects in horticulture sector has been promoted, the concerning technology development and market has recently been enlarged. In particular, the domestic and overseas products for a variety of horticulture complex environmental control equipments has been produced and sold, but it can be seen that there is no the compatibility among the products and is differences in performance. There is the need to provide a standard of the specifications and installation criteria for domestic products in order to promote ICT convergence deploying projects in the horticulture field and provide convenience to the consumers through the compatibility among products under this circumstances. In this paper, we suggest the standardization items which our country can lead and the directions for future standardization by analyzing the introducing situation and the trend of Technology and standardization for complex environmental control system in domestic horticulture field.