• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.207-210
• /
• 2002

This paper is concerned with the experiments on the active vibration control of a plate with piezoceramic sensors and actuators. The natural frequencies of the composite plate featured by a piezo-film sensor and piezo-ceramic actuator are calculated by using the modal analysis method. Modal coordinates are introduced to obtain the state equations of the structural system. Six natural frequencies were considered in the modelling, because robust control theory which has inherent robustness to structured uncertainty is adopted to suppress the transients vibrations of a glass fiber reinforced(GFR) composite beam. A robust controller satisfying the nominal performance and robust performance is designed using robust theory based on the structured singular value. Simulations were carried out with the designed controller and effectiveness of the robust control strategy was verified by results.

• 소음진동
• /
• 제7권1호
• /
• pp.161-168
• /
• 1997

The present paper describes the vibration control experiment of composite plates with bonded piezoelectric sensor and actuator. The system is modeled as two degree-of-freedom system using modal coordinates and the system parameters are obtained from vibration tests. Kalman filter is adopted for extracting modal coordinates from sensor signal, and control algorithms applied to the system are Linear Quadratic Gaussian(LQG) control, Bang-Bang Control (BBC), Negative Velocity Feedback(NVF), Proportional Derivative Control(PDC). From observation of the spillover and control perfomance, it is concluded that a higher order control algorithm such as LQG rather than BBG, NVF, PDC is suitable for efficient simultaneous control of both bending and twisting modes of composite plates.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1039_1040
• /
• 2009

본 논문에서는 특성이 다른 두 에너지원인 연료전지와 태양광을 최적의 조건으로 복합발전할 수 있도록 새로운 단일 컨버터 및 단일 인버터 구조 및 전력제어 알고리즘을 제안한다. 제안된 회로 및 알고리즘의 타당성을 컴퓨터 시뮬레이션과 실험을 통해 검증한다.

• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.261-266
• /
• 2001

The flexural vibration of laminated composite beams with active and passive constrained layer damping has been investigated to design a structure with maximum possible damping capacity. The equations of motion are derived fro flexural vibrations of symmetrical,. multi-layer laminated beams. The damping ratio and model damping of the first bending mode are calculated by means of iterative complex eigensolution method. The direct negative velocity feedback control is used for the active constrained layer damping. It is shown that the flexible laminated beam is more effective in the vibration control for both active and passive constrained layer damping. and this paper addresses a design strategy of laminated composite under flexural vibrations with constrained layer damping.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1337-1343
• /
• 2004

Shape optimization was performed to obtain a precise shape of cutouts including the internal shape of cutouts in a laminated composite plate by three dimensional modeling using solid element. Volume control of the growth-strain method was implemented and the distributed parameter chosen as Tsai-Hill fracture index for shape optimization. It makes Tsai-Hill failure index at each element uniform in laminated composites under the predetermined volume a designer requires. Shapes optimized by Tsai-Hill failure index were compared with those of the initial shapes for the various load conditions and cutouts. The following conclusions were obtained in this study; (1) It was found that growth-strain method was applied efficiently to shape optimization of three dimensional cutouts in a laminate composite, (2) The optimal shapes of the various load conditions and cutouts were obtained, (3) The maximum Tsai-Hill failure indices of the optimal shapes were remarkably reduced comparing with those of the initial shapes.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.712-714
• /
• 2015

기존의 정보보호시스템들은 이미 확보된 시그니처 또는 이전에 분석된 정보를 기반으로 악성코드에 대응하고 있기 때문에, 시그니처가 알려지지 않은 악성코드 또는 변형된 악성코드의 경우, 탐지 및 식별에 한계를 지니고 있다. 본 연구는 이와 같은 문제를 해결하기 위해, 무결성을 검증하는 화이트리스트 기반의 응용프로그램 실행제어, 매체제어, 레지스트리 보호, 중요 파일 변경 방지, 프로세스 접근 역접속 IP/포트 통제 등의 기술을 복합적으로 적용하여, 악성코드의 침입뿐만 아니라 운영체제 및 응용프로그램 취약점을 기반으로 한 익스플로잇 공격으로부터 단말 PC를 더욱 확실하게 보호할 수 있도록 한 엔드포인트 응용프로그램 실행 통제 방안을 제시하였다. 본 연구의 결과는 프로토타입 형태로 개발하여 실 환경에서 통합테스트를 하여 공공기관, 금융기관, 통신사 등 실제 환경에 적합한 기술 및 기능임을 확인하였다. 본 연구를 통해, 실행 전 응용프로그램 무결성 검증과 실행 후 응용프로그램 실행 흐름 통제를 복합적으로 사용하여 알려진 악성코드 시그니처 정보에 의존한 기존 정보 보호 시스템과는 달리 알려지지 않은 악성코드까지 원천적으로 차단할 수 있을 것으로 기대된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.277-282
• /
• 2003

The growth-strain method was applied to cutout optimization in laminated composite plates. Since the growth-strain method optimizes a shape by generating the bulk strain to make the distributed parameter uniform, the distributed parameter was chosen as Tsai-Hill value. In this study, of particular interest is to see whether the growth-strain method developed for shape optimization in isotropic media would work for laminated composite Plates. In volume control of the growth-strain method, it makes Tsai-Hill value at each element uniform in laminated composite plates under the predetermined volume. The shapes optimized by Tsai-Hill fracture index were compared with those of the initial shapes for the various load conditions and predetermined volumes of laminated composite plates. As a result, it was verified that volume control of the growth-strain method worked very well for cutout optimization in laminated composite plates.

• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1066-1072
• /
• 2013

In this work, active control algorithm is adopted to reduce delamination effects of the damaged composite structure and control performance with MFC actuator is numerically evaluated. Finite element model for the damaged composite structure with piezoelectric actuator is established based on improved layerwise theory. In order to achieve high control performance, MFC actuator, which has increased actuating force, is considered as a piezoelectric actuator. Mode shapes and corresponding natural frequencies for the damaged smart composite structure are studied. After design and implementation of active controller, dynamic characteristics of the damaged smart composite structure are investigated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.11-14
• /
• 2000

This paper presents the vibration control of a glass-fiber reinforced thermoplastic composite beam with a distributed PVDF sensor and piezo-ceramic achlator. The three types of different controllen which are PID, H$\infty$ , and p-synthesis ontrollcr are employed to achieve vibration suppression in the transient vibration of composite beam. In the H$\infty$ , controller design, 1st and 2nd natural frequencies are considered in the modeling, because robust control theory which has robustness to struchred uncertainty is adopled Lo suppress the vibration. If the controller designed by H$\infty$ , theory does not satisfy control performance, it is improved by $\mu$ -synthesis method with D-K iteration so that the$\mu$-contoller based on the structured singular value satisfies the nominal performance and robust performance Simulations and experiments were carried out with the designed controllers m order to demonstrate the suppression efficiency of each controller.

• 기계저널
• /
• 제32권9호
• /
• pp.777-787
• /
• 1992

21세기를 향한 여객선의 추세는 초고속화, 대형화(국제화), 성에너지화, 우수한 내항성능, 저진동 및 저소음 등을 갖춘 선박을 요구하고 있다. 이런 관점에서 초고속선으로 속력에 한계가 있는 단동선 (monohull), 쌍동배수량형(catamaran), 최소수면 쌍동선(SWATH)의 선형과 대형화가 곤란한 수중익선 (hydrofoil)보다는 속력면에서 유리하고 대형화가 가능한 표면 효과선 또는 앞 에서 언급한 고속 선형의 장점을 복합시킨 각종 복합선형이 개발되리라고 생각한다. 그러나 복 합선형이 실용화되기까지는 경제적인 건조비, 운항자세 제어 시스템, 신소재를 이용한 경구조화, 진동과 소음, 추진 시스템 등에 대한 요소 기술의 개발이 선행되어야 한다. 끝으로 선박의 속력이 50노트가 넘는 초고속선을 설계, 제작, 운항을 하는데 있어 그 개념이 조선공학에서 다루어지는 통상 선박기술의 연장이라고 그 영역을 정리하는 경향이 있다. 이 글을 정리하면서 느낀 것이 지만 해상교통 수단의 초고속화가 이루어질수록 그 지지기술 및 자세제어기술 등에 있어서는 항공기 기술에 가까워짐을 알게 되었다. 그러한 뜻에서 초고속선 개발에는 항공기 기술에서 얻 어진 노하우를 잘 활용하는 일도 중요하리라 생각된다.