• Defense and Technology
• /
• no.10 s.164
• /
• pp.43-44
• /
• 1992

복합재 연소관과 노즐을 기계적 체결방법으로 결합하면 결합부위에서 재료의 불연속성과 기하학적 불연속성으로 인한 높은 응력집중이 발생해 구조적으로 매우 취약하게 됩니다. 복합재 연소관의 경우에는 내압을 받는 원통형 구조물이므로 기존의 평판에 대한 연구결과를 그대로 사용할수 없으므로, 이 글에서는 복합재 셀 구조물의 응력 및 파손 해석을 수행할수 있도록 1차전단변형 셀이론을 이용한 유한요소해석 프로그램을 개발하였습니다. 기계적체결부위의 모델링에 대해 검토하였으며 복합재료의 파손평가에 사용되는 여러가지 파손식을 적용해 비교하였습니다. 이 해석 방법을 이용해 복합재 연소관의 적층각, 볼트직경, 연소관의 끝단까지의 길이 등이 파손하중에 미치는 영향을 제시하였습니다

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2051-2060
• /
• 1993

A finite element program using degenerated shell element was developed to solve the geometric, material and combined nonlinear behaviors of composite laminated shell. The total Lagrangian method was implemented for geometric nonlinear analysis. The material nonlinear behavior was analyzed by considering the matrix degradation due to the progressive failure in the matrix and matrix-fiber interface after initial failure. The result of the geometric nonlinear analysis showed good agreement with the other exact and numerical solutions. The results of the combined analyses considered both geometric and material nonlinear analyses were compared with the experiments in which internal pressure was applied to the filament wound antisymmetric tubes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.35-43
• /
• 2006

In this paper, procedures and research results involved in the development of glass reinforced composite bridge deck of hollow section were presented. Laminate design for the 3 cell deck section was performed. Structural characteristics such as serviceability, strength, failure and stability for DB24 load were analytically studied through the finite element analysis for the composite deck plate girder bridge. Composite deck tube was fabricated with pultrusion and extensive tests such as flexural test, girder-connection test, barrier-connection test, compression fatigue test and flexural fatigue test were carried out to evaluate structural behavior experimentally. Also, field load test was conducted for the demonstration plate girder bridge with composite deck and requirements for the strength and serviceability were reviewed.

• Composites Research
• /
• v.26 no.2
• /
• pp.85-90
• /
• 2013

This paper presents the fabrication and 3-point flexion testing of carbon fiber reinforced polymer (CFRP) composite face/aluminum honeycomb core sandwich panels. Specimen sandwich panels were fabricated with three honeycomb types (3.18 mm, 4.76 mm, and 6.35 mm cell size) and three panel radii (flat, r = 1.6 m, r = 1.3 m). The curved sandwiches were fabricated normally with the core in the W-direction. The tensile mechanical properties of the CFRP $2{\times}2$ twill fabric face laminate were evaluated (modulus, strength, Poisson's ratio). The measured values are comparable to other CFRP fabric laminates. The flat sandwich 3-point flexion test core shear strength results were 11-30% lower than the manufacturer published data; the test set-up used may be the cause. With a limited sample size, the 1.3 meter panel curvature appeared to cause a 0.8-3.8% reduction in ultimate core shear strength compared to a flat panel.