• KIEAE Journal
• /
• v.7 no.5
• /
• pp.53-58
• /
• 2007

In order to predict the indoor air pollutant, the VOCs emission rate is used through small chamber in the design process. However, the small chamber method has limitations as the convective mass transfer coefficient, the most important factor when predicting VOCs contamination of indoor air, is different between the small chamber result and the measured data in the actual building. Furthermore, the existing studies which analyzed mass transfer coefficient in the small chamber were directed on the small chambers developed at the time and FLEC(Field and Laboratory Emission Cell), thus, are different from the current small chamber which has been changed with improvements. The purpose of this study is to determine the emission rate of pollutant in multi-layered building materials, and predict the indoor pollutant concentration through the CFD(Computational of Fluid Dynamics) and CRIAQ2 based on the mass transfer coefficient on singled-layered building material by using the current small chamber widely used in Korea. Futhermore, this study used the new convective mass transfer coefficient(hm') which indicates the existing convective mass transfer coefficient(hm) including VOC partition coefficient(k). Also, formaldehyde was selected as target pollutant.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.277-282
• /
• 2006

In order to predict the indoor air pollutant, the VOCs emission rate is used through small chamber in the design process. However, the small chamber method has limitations as the convective mass transfer coefficient, the most important factor when predicting VOCs contamination of indoor air, is different between the small chamber result and the measured data in the actual building. Furthermore, the existing studies which analyzed mass transfer coefficient in the small chamber were directed on the small chambers developed at the time and FLEC(Field and Laboratory Emission Cell), thus, are different from the current small chamber which has been changed with improvements. The purpose of this study is to determine the emission rate of pollutant in double-layered building materials through the CFD(Computational of Fluid Dynamics) and Numerical analysis based on the mass transfer coefficient on singled-layered building material by using the current small chamber widely used in Korea. Futhermore, this study used the new convective mass transfer coefficient($h_m'$) which indicates the existing convective mass transfer coefficient($h_m$) including VOC partition coefficient(k). Also, formaldehyde was selected as target pollutant.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.43-52
• /
• 2011

Unnecessary transportation of resources are one of the major causes that adversely affect construction site work productivity. Therefore, layout related studies have been conducted with efforts to develop management technologies and techniques to minimize the resource transportation made at site-level. However, although the necessity for floor-level layout planning studies has been increasing as buildings have become larger and floors have become more complicated, studies to optimize the transportation of materials inside buildings are currently not being actively conducted. Therefore, in this study, a model was developed using genetic algorithms(GA) that will enable the optimization of the locations of finishing materials on the work-floor. With the established model, the arrangement of diverse materials on complicated floors can be planned and the optimized material layout planning derived from the model can minimize the total material transportation time spent by laborers during their working day. In addition, to calculate travel distances between work sites and materials realistically, the concept of actual travel distances was applied. To identify the applicability of the developed model and compare it with existing methodologies and analyze it, the model was applied to actual high-rise residential complexes.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.273-278
• /
• 2013

This paper simulated the virtual constructions design that helps make constructions design effectively done by assembling materials as components and patterns using studs in steel house method. We also propose the virtual constructions design technology which makes change of constructing easy and reduces the cost effectively through a simulation of construction design like design, analysis, change information, and assembly in the construction field. It especially is possible for designers and users to change internal and external of a construction easily by using patterns.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.112-115
• /
• 2011

본 연구는 분자동역학 전산모사를 통하여 나일론 6 고분자재료 및 나이론 6 고분자재료를 기지재료로 사용하는 나노복합재에 대하여 인장하중을 부여하고, 인장에 의하여 발생하는 구조적 변화 및 물질의 구조적 특성과 열전도 특성 사이의 상관관계를 규명하였다. 나노복합재의 열전도특성을 변화시키는 주요 인자로는 나노입자, 인장에 의한 고분자 사슬의 배열 변화, 자유부피(free volume)의 변화이다. 고분자 사슬이 열전달 방향으로 배열될 경우 음양자(phonon)의 흐름을 가속화하여 열전도특성이 증가하며, 반면 자유부피의 증가는 음양자의 산란을 증가시켜 열전도특성이 저하된다. 따라서 서로 상반작용을 하는 두 인자가 복합적으로 작용하여 열전도 특성을 결정한다. 인장 하중이 부여됨에 따라 시스템의 열전도특성이 증가하며, 각 시스템의 증가 정도는 시스템의 구조적 특성에 따라 서로 다르다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.46-48
• /
• 1998

1. 서론 : 최근에 기체분리막의 재료로 많이 연구가 되고 있는 폴리이미드는 열, 화학적으로 안정하며 기계적 강도가 우수한 고분자재료이다. 그동안 본 연구실에서는 폴리이미드를 직접 합성하여 플라즈마처리, UV 처리등과 같은 고분자막수식에 의한 방법과, 무기재료와 폴리이미드를 이용하는 복합막 제조 등으로 폴리이미드의 투과특성을 향상시키는 연구를 진행해 왔다. 본 실험에서는 고분자재료로 폴리이미드 계열 중 가장 산소투과계수가 높은 6FDA-p-TeMPD 폴리이미드와 산소투과계수는 작고 선택도가 높은 6FDA-m-TeMPD 폴리이미드를 사용하였고, 무기재료는 surface pore size가 7.3${\AA}$, super cage가 13${\AA}$인 다공성 물질로 흡착력이 뛰어난 NaX형 제올라이트를 사용하였다. (생략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.30-31
• /
• 1994

분리막을 이용한 분리기술은 일반증류법에 의한 분리 또는 정제에 어려운 액체 혼합물을 분리하는데 적용될 수 있고 또한 미래 산업적인 중요성 때문에 최근 유용한 정제법으로 주목을 끌고 있다. 한편, 투과증발법에 의한 액체혼합물의 분리는 공정자체는 매우 간단하면서도 분리막의 투과성능에 따라 분리효율이 달라지기 때문에 이에 적합한 고분자 분리막의 개발은 아직도 많은 연구과제로 남아있는 상태이다. 따라서 본 연구에서는 증류법이나 기타방법에 의하여 회수된 저 농도의 유기수 용액으로부터 물을 보다 효율적으로 분리하여 고농도의 특정순수 유기용제를 얻으려는데 목적을 두고 보다 높은 물 선택성과 투과율을 갖는 새로운 복합막을 개발하기 위해 고흡수성 고분자재료인 CMC와 PVA 그리고 PAA를 소재로 하여 목적하는 분리기능을 갖는 새로운 복합막을 제조하여 실용가능성을 검토하기 위하여 투과증발 분리실험을 하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.109-120
• /
• 2024

For successful waterproofing construction, it is very important to secure construction quality as well as material performance of waterproofing materials used in construction. Due to the long-term cost reduction policy following the economic downturn in the construction market, most construction companies are using general low-priced waterproof materials rather than high-quality waterproof materials without clear quality control standards. Without clear education on construction, construction is being carried out with meaning only on construction activities. In addition, the waterproofing method applied in combination is a situation where water leakage occurs due to waterproofing failure due to insufficient construction quality because the construction method is complicated. Therefore, it is necessary to review the quality control measures(design, materials, construction) for successful waterproofing work and improve problems that are derived so that stable waterproofing work can be done. In order to expect the leakage prevention effect of a building, first, it is required to select appropriate materials for each part of the building and environment in the design stage, and the selected materials must satisfy all items of the Korean Industrial Standard(KS). Second, to secure the quality of waterproofing construction, sincere construction by workers is required. In this paper, we tried to describe "review of waterproof design", "constructor education", "site inspection", and "criticism(correction/supplementation)" as quality control measures after material selection.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.113-117
• /
• 2000

경량 건축소재는 건축자재의 경량화, 고급화 및 다양화 등의 기능성 건축소재로의 역할을 요구하고 있으며 그 중 대표적인 것으로는 polyurethane foam이 있다 일반적인 플라스틱 foam의 경량 건축소재는 난연성에 대한 문제점과 첨가제에 의한 중량 증가, 화재 발생시 과다연기발생 등의 문제점이 있으며 저밀도 콘크리트 등의 무기소재는 flexibility가 떨어져 충격과 휨강도가 매우 낮은 단점을 가지고 있다.(중략)

• Journal of the KSME
• /
• v.28 no.6
• /
• pp.525-529
• /
• 1988

고분자 및 복합재료 성형기술의 향상은 다른 재료의 생산기술에서 요구되는 것과 같이 고정밀 도를 성취하기 위한 기술, 전산기를 이용한 가공공정의 자동화, 풍부한 데이터베이스 및 소프트 웨어의 개발, 재료 및 성형장비의 표준화, 고급인력의 양성 등이 절대적인 필수조건이다. 필자는 아직 국내의 사정에 익숙하지 못해서 여러면에서 부족한 국내의 산업수준을 고려할 때 국내의 고분자관련산업도 많은 발전을 요구한다고 판단된다. 자동차, 전기전자, 우주항공 등 첨단산업 으로부터 장난감, 스포츠용품까지 널리 사용되는 고분자 재료의 가공기술 개발에 과감한 투자를 하여야 할 것으로 확신한다.